Greater London · England
Bathroom & kitchen resealing in Millbank, Greater London
Specialist bathroom resealing for Millbank: careful preparation, the right product and tidy work. Ask us for a quick quote.
- A messy, uneven bead from a previous reseal
- Shrunken sealant along the back of a worktop
- Gaps where the bath or tray has moved
When to call us in Millbank
The wrong product fails fast. Decorators’ caulk and all-purpose sealants are not made for constant wetting, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
Any of these means the joints need attention:
- Black spots spreading through the bead
- Splits where the tray meets the wall
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
Millbank is in London, so parking needs planning: let us know about parking bays, permits or a driveway.
What to look for in a quote
- Which colour the sealant will be
- How the surfaces are prepared before sealing
- How long to leave it before use
- How hidden problems are handled
Bathroom resealing for homes and businesses in Millbank
It is not only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you have leaking joints on a shower screen and damp behind the bath or under the tray, we can help, whatever the surface.
Across London, a large share of homes are flats, conversions or mansion blocks, so a bathroom is often directly above a neighbour’s ceiling. That makes worn sealant and cracked grout in Millbank more than a cosmetic job.
Our work is backed for twelve months.
- Location
- Millbank (SW1P, W1J, SW1V)
- Region
- Greater London
- Cover
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Quotes for bathroom resealing in Millbank
For a quick quote, just ask. The main things that affect it are:
- Access and height
- Any working-time requirements on site
- The number and length of the joints
- Any mould that needs treating
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or send us an email and we will talk you through it.
What to tell us for a quote
To help us quote quickly, let us know:
- If someone has resealed it before
- Whether it’s a home or a business
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
For bathroom resealing in Millbank, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Nearby places to Millbank
More services for Millbank
DIY sealant or a professional job?
If you’ve already had a go yourself, that is fine. We cut it out and start again.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
What we can’t put right
We will always be straight with you, so here’s what sealant can’t fix:
- Movement from a bath with loose feet or no proper support
- Failed grout lines across the wall
- A tray or bath that is cracked through
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Basins & vanity units
- Baths
- Sinks & splashbacks
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & upstands
Questions from Millbank
Could a tired shower seal in my Millbank flat affect the neighbours below?
Yes. In a flat, water from a failed bath or shower seal has only one way to go, and that’s down. A proper reseal before the leak starts is the easy fix.
Is parking a problem for a job in Millbank?
Parking in Millbank, as in most of London, takes a little planning: a visitor permit or a nearby bay makes the day run more smoothly, so mention what’s available when you book.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we are using and why.
How long does the new silicone need before I use the shower?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Are you fully insured?
Yes. We are fully insured, and we can confirm the details when we quote.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
How to look after the new joints
After the cure time, these simple habits help:
- Give the silicone its full cure time
- Squeegee the walls and tray after use
- Check the joints every few months for splits or lifting
- Clean with a mild bathroom cleaner and a soft cloth
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
Millbank homes and their sealant
In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early. London’s water is hard, which leaves limescale on sealant, grout and taps, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near London Victoria station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as Christ Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Millbank is about 1 mile south-east of City of Westminster, in Greater London. Every kind of property in Millbank can book us for bathroom resealing. The work is guaranteed for a year. We cover 764 towns and villages across Greater London, from the larger towns to small villages.
Every address in SW1P, W1J and SW1V is within our area for bathroom resealing. You’ll find streets such as Eaton Lane, Wilton Road and Castle Lane, all of which we cover. Being close to the A4 and A202, Millbank is simple for us to get to. We also cover the places around Millbank: Westminster (1 mile north), Victoria (1 mile south-west), Pimlico (1 mile south), Vauxhall (1 mile south-east) and Lambeth (1 mile south-east). Within a short drive, we also cover Kensington (3 miles west), Shoreditch (3 miles north-east), Walthamstow (8 miles north-east), Hoxton (3 miles north-east), Whitechapel (3 miles north-east) and Hampstead (4 miles north-west).
Around Millbank
In Millbank, that means homes and buildings near Blewcoat School, St Matthew's School and London Library and the streets around them. Also close by are St James's Park (under half a mile north) and Grafton Arms (less than half a mile south). For rail, the closest station is London Victoria station, about 0.6 miles south-west of the centre. Other landmarks nearby include Westminster Hospital (within half a mile east) and Kingly Court (0.9 miles north). Open spaces near Millbank include St. James's Park Lake and Ludgate Hill.
How it works
We work through the job in order: protect, prepare, seal, tidy. Typically it takes two to three hours for a typical bath, depending on how much old sealant there is and we leave things clean and tidy. In a London area like Millbank, the main things to plan are parking and access: tell us about permits, visitor bays or off-street space, which floor we’re working on and whether there’s a lift.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Mention any tricky access
- Clear items away from the joints we’re working on
Getting a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.
Related advice
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured.