Aberdeenshire · Scotland
Bathroom & kitchen resealing in Midmar, Aberdeenshire
Bath, shower, basin, wet room, worktop and sink resealing for Midmar, backed by a 12-month guarantee. Ask us for a quote.
- Black mould in the silicone that will not clean off
- Failed sealant on the screen profile
- A reseal done over the top of the old bead
Bathroom resealing in Midmar, done properly
It isn’t only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you have water getting behind the kitchen upstand and water escaping at the shower enclosure, we can help.
In and around a place like Midmar, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
Every job comes with a 12-month guarantee, wherever you are in Aberdeenshire.
- Location
- Midmar (AB51)
- Region
- Aberdeenshire
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Signs you need bathroom resealing in Midmar
Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
It’s worth asking for a quote if you see:
- Damp behind the bath or under the tray
- Sealant that has split, shrunk or peeled away
- Black spots spreading through the bead
- Smears of silicone across the tiles
In and around Midmar, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
What to look for in a quote
- When the joint can take water or movement
- Which sealant they’ll use, and why
- What preparation is included
- The length of the guarantee
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Squeegee the walls and tray after use
- Keep an eye on the corners, where splits start
- Wait for the cure time we give you
- Avoid abrasive pads on the sealant
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Honest limits
It helps to know what we can’t do:
- Cracks in the tray itself rather than the joint
- Water getting in through the grout rather than the sealant
- Loose or hollow tiles, or failed tanking behind them
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before booking.
Where we work in Midmar
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
What bathroom resealing looks like in Midmar
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Whether the job is in Midmar itself or nearby, the right material for each joint matters as much as a neat finish.
Midmar is about 10 miles south-west of Inverurie, in Aberdeenshire. Jobs in Midmar get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 161 towns and villages across Aberdeenshire, from the larger towns to small villages. Our Aberdeen page covers work nearby.
Here we cover the AB51 postcode area for bathroom resealing. We also cover the places around Midmar: Sauchen (2 miles north-east), Echt (4 miles east), Dunecht (4 miles east), Monymusk (5 miles north) and Kirkton of Tough (5 miles north-west). Further out, we also cover Inverurie (10 miles north-east), Westhill (9 miles east), Banchory (7 miles south), Garioch (10 miles north-east), Kemnay (6 miles north-east) and Kintore (8 miles north-east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Around Midmar
Nearby you will also find Midmar Castle (2.1 miles south-east). Not far away are Hill of Fare.
The process
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the job takes around two hours for one bath or shower, longer for a whole bathroom in most cases. For a place like Midmar, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Keep children and pets away from the work area
- Where the joints are inside, avoid wetting them before we arrive
- Mention any sign-in or site rules at work premises
Get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.
Advice
Other services in Midmar
What affects the quote in Midmar
We quote each job individually. This is what makes a difference:
- The number and length of the joints
- Which sealant suits the joint
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
You don’t need to know the technical terms. Just tell us:
- A few pictures by email, if you can
- Any access issues, like height or stairs
- The rough size of the job
- The type of property
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, email us at info@mrmastic.co.uk.
Questions from Midmar
Will you come out to Midmar?
Yes, Midmar is covered. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is bathroom resealing in Midmar guaranteed?
All our work, in Midmar and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Are you insured?
Yes, we are fully insured.
How long does the new silicone need before I use the shower?
Normally after around 24 hours. You will get the exact cure time before we leave.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Can you reseal around my kitchen sink and worktop?
Yes. We reseal worktop upstands, sinks and splashbacks, in a kitchen-suitable sealant, matched to the worktop where it’s on show.
Why it’s worth doing now in Midmar
A clean new bead makes a room look cared for, which matters if you are letting a property or selling it. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Why Midmar clients choose us
- Trusted Arbo and Everbuild sealants
- Over 20 years’ experience
- Experience in homes, commercial sites and hotels
- Anti-fungal silicone where joints get wet
Take a look at how sealant jobs are priced and our reviews.
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.