Isle of Wight · England
Bathroom Resealing in Merstone
Bathroom resealing across Merstone and nearby, with every bit of old sealant taken out first.
- Cracked, shrunken or lifting silicone
- Two layers of silicone, both failing
- A messy, uneven bead from a previous reseal
How we handle bathroom resealing in Merstone
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the bead is not stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. If you’re dealing with gaps where the bath or tray has moved and smears of silicone across the tiles, we can help, on wet rooms, shower trays & enclosures and baths alike.
Around Merstone, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Our work is backed for twelve months.
- Place
- Merstone (PO30)
- Region
- Isle of Wight
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Open a window or run the fan so the room dries
- Stick to a soft cloth and a mild cleaner
- Wipe the sealant dry after showering
- Let new sealant cure fully before it gets wet
Keep bottles and razors off the sealant line, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
FAQs for Merstone
Is Merstone in your area for bathroom resealing?
Yes, Merstone is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear price.
Will you come out to Merstone?
Yes. Merstone is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How long will the resealing take?
One bath or shower is around two hours’ work, including cutting out the old sealant. A whole bathroom plus the kitchen may take most of the day.
Where is Mr Mastic based?
We’re based in Crawley, and we work across South East England, London and Scotland.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
How much does bathroom resealing cost in Merstone?
Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or email us and tell us what needs doing and where.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Surface by surface
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Shower trays & enclosures
There are usually two jobs in a shower: the tray-to-wall joint and the enclosure joints. Both take water every day, so both are resealed with anti-fungal sanitary silicone.
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
When something else is needed
We will always be straight with you, so here’s what sealant cannot fix:
- A cracked shower tray or bath (that needs repair or replacement)
- A leaking waste, trap or valve
- Damage behind the tiles that needs a tiler
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
- Kitchen worktops & upstands
Bathrooms and kitchens in Merstone
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Merstone, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Merstone is about 3 miles south-east of Newport, in the Isle of Wight. Jobs in Merstone get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Merstone is one of 125 places in the Isle of Wight where we work for bathroom resealing. We also work in Portsmouth, about 13 miles from Merstone.
All of PO30 is within our area for bathroom resealing, from the main roads to the quietest streets. Whether your property is on Merstone Lane, Chapel Lane and Newlands or anywhere close by, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Arreton (1 mile north-east), Rookley (1 mile south-west), Hale Common (1 mile south-east), Rookley Green (1 mile south-west) and Blackwater (2 miles north-west). Further out, we also cover Newport (3 miles north-west), Ryde (6 miles north-east), Cowes (7 miles north), Sandown (4 miles east), Shanklin (4 miles south-east) and Ventnor (5 miles south-east). If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
Landmarks near Merstone
Merstone’s nearest station is Shanklin station, about 3.8 miles south-east. Nearby you will also find Whitecroft Hospital (2.2 miles west) and Carisbrooke Castle (3.1 miles north-west). Open spaces near Merstone include Stenbury Down and Alverstone Mead.
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Nearby places to Merstone
More services for Merstone
The process
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen from start to finish. Somewhere like Merstone needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
Get a quote
Asking for a quote is easy: let us know the job and the location. A few photos by email make the job easier to understand, and we’ll take it from there.
Advice
Do you need bathroom resealing in Merstone?
Sealing over old silicone is one of the commonest mistakes we find. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
It’s worth asking for a quote if you see:
- A joint torn by a bath that flexes
- New sealant laid over old sealant that is now lifting
- Black spots spreading through the bead
- Shrunken sealant along the back of a worktop
Letting a property close to Shanklin station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- How the joint is cleaned and prepared
- How hidden problems are handled
- Which colour the sealant will be
- Which sealant they’ll use, and why