Isle of Wight · England

Regrouting in Merstone

Tiled areas in Merstone need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Gaps where the shower grout has gone
  • Grout that makes sound tiles look old
  • Grout that stays dark however much it’s cleaned

Need regrouting in Merstone?

About our regrouting in Merstone

Our applicators rake out the old grout to an even depth, taking care not to chip the tile edges. The joints are then vacuumed, regrouted and cleaned off, with silicone renewed in the corners. We work on bathroom wall tiles, wet rooms and kitchen splashbacks, and the jobs we see most are crumbling grout between the tiles and a grout colour that no longer suits the room.

Somewhere as small as Merstone, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.

Big or small, it’s backed by our 12-month guarantee.

Where
Merstone (PO30)
Wider area
Isle of Wight
Cover
One year on every job
Quotes
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

FAQs for Merstone

I let a flat near Shanklin station. Can you help?

Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.

Is Merstone in your area for regrouting?

Yes, Merstone is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.

Do you grout the corners?

Flexible sealant. Grout is for the joints between tiles and moving joints need sealant.

Where do you work from?

We work from Crawley. Our applicators cover Merstone.

How long does the job take?

It depends on the size of the job, but most jobs take anything from a few hours to a full day, depending on the area. We’ll give you a better idea when we quote.

What information do you need?

Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply call 0345 464 0079 or email us.

Do you reseal at the same time?

Normally we do both. Grout fills tile gaps and sealant handles the moving joints, so we renew both and it’s all in the quote.

How much does regrouting cost in Merstone?

Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or drop us an email and tell us what needs doing and where.

Do you need regrouting in Merstone?

Harsh cleaners and scrubbing wear grout away. Some bleaches and acid descalers break grout down with repeated use, leaving the joints sunken and rough.

Signs it’s time to call us include:

  • Crumbling grout between the tiles
  • Splashback grout that has darkened
  • A grout colour that no longer suits the room
  • Cracked grout along the bath or tray

Rented homes near Shanklin station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.

Comparing quotes

  • How hidden problems are handled
  • Who turns up on the day
  • How long to leave it before use
  • Which sealant they’ll use, and why

Choosing a sealant specialist

What we do, step by step

When we arrive, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. The work usually takes a few hours for a shower enclosure, longer for a whole room. Somewhere like Merstone needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Every tile area is checked for hollow or loose tiles first.
  2. We rake out the grout evenly, protecting the tile edges.
  3. The joints are vacuumed clean.
  4. We regrout the joints and clean the tile faces.
  5. We finish with silicone in the moving joints.

How to prepare

  • Try not to wet indoor joints just before the visit
  • Clear items away from the joints we’re working on
  • Let us know about earlier repairs to the joints

Get a quote

If you are in Merstone and need regrouting, ring 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.

Ask for a quote

Read more

Regrouting in Merstone: local notes

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

In and around Merstone, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.

Merstone is about 3 miles south-east of Newport, in the Isle of Wight. Every kind of property in Merstone can book us for regrouting. The work is guaranteed for a year. Our the Isle of Wight coverage runs to 125 places, Merstone among them. You can also see our page for Portsmouth, roughly 13 miles from Merstone.

Our applicators cover all of PO30 for regrouting. Whether your property is on Merstone Lane, Chapel Lane and Newlands or a nearby road, we can help. Neighbouring places we cover for regrouting include Arreton (1 mile north-east), Rookley (1 mile south-west), Hale Common (1 mile south-east), Rookley Green (1 mile south-west) and Blackwater (2 miles north-west). Larger places within reach include Newport (3 miles north-west), Ryde (6 miles north-east), Cowes (7 miles north), Sandown (4 miles east), Shanklin (4 miles south-east) and Ventnor (5 miles south-east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.

Local landmarks in Merstone

Merstone’s nearest station is Shanklin station, roughly 3.8 miles south-east. Nearby you’ll also find Whitecroft Hospital (2.2 miles west) and Carisbrooke Castle (3.1 miles north-west). Not far away are Stenbury Down and Alverstone Mead.

Map of Merstone © OpenStreetMap contributors

Different surfaces, different methods

Bathroom wall tiles

Tiles away from the shower stay drier but still stain and crack. Regrouting brings them back in line.

Wet rooms

Regrouting a wet room helps keep water on the surface of the tiles. It can’t fix waterproofing below the tiles.

Should I try it myself first?

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

Landlords, agents and businesses in Merstone

Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.

Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured for the work.

How we quote for regrouting

Your quote is based on your job. We look at:

  • When we can work, for business premises
  • How easy the joints are to reach
  • The size of the job
  • How many rooms, windows or areas are involved

Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What we need to know

To help us quote quickly, please include:

  • The type of property
  • Photos by email, if that is easy
  • Whether it has been sealed before
  • Where the property is

Want a quote for regrouting? Please ring 0345 464 0079 or drop us an email with a few details. We’ll explain what we’d do and give you a clear quote before any work starts.

Why it’s worth doing now in Merstone

Grouting over old grout rarely lasts. A thin skin on top tends to break off. Raking out to a consistent depth gives the new grout something to hold. Around Merstone, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.

Why choose Mr Mastic in Merstone

  • Trusted Arbo and Everbuild sealants
  • One-year guarantee on every job
  • Tidy, careful work
  • Domestic, commercial and hotel work

Read what affects the cost or customer reviews.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job