Aberdeenshire · Scotland
Memsie Bathroom Resealing
Specialist bathroom resealing for Memsie: careful preparation, the right product and tidy work. Call for a quick quote.
- Two layers of silicone, both failing
- Black mould in the silicone that won’t clean off
- A joint torn by a bath that flexes
Bathroom resealing in Memsie, done properly
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on shower trays & enclosures, basins & vanity units and wet rooms, and common reasons people get in touch are water escaping at the shower enclosure and splits where the tray meets the wall.
For a place like Memsie, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
Each job carries a 12-month guarantee, large or small.
- Location
- Memsie (AB43)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What bathroom resealing looks like in Memsie
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
Whether the job is in Memsie itself or nearby, the right material for each joint matters as much as a neat finish. Around Memsie, as everywhere, bathroom resealing is only as good as the preparation behind it.
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. If you need bathroom resealing in Memsie, please email us at info@mrmastic.co.uk for a quick quote. We cover Aberdeenshire from our Crawley base, Memsie included. Memsie is one of 161 towns and villages in Aberdeenshire where we work. There’s also a page for Aberdeen, roughly 35 miles from Memsie.
Postcode districts we cover here for bathroom resealing: AB43. Whether your property is on Cairn Close, Westcroft Close and Muir Road or anywhere close by, our applicators can take on the job. If you’re just outside Memsie, we cover Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). Further out, we also cover Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
Near you in Memsie
Nearby you will also find Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). For a walk, there’s Mormond Hill.
How the job changes by surface
Kitchen worktops & upstands
Worktop joints get wet and wiped every day. The new bead is colour-matched where it shows, so the line doesn’t stand out.
Basins & vanity units
Basin joints are short and close to eye level: the bead is right in front of you, so it’s tooled cleanly and evenly, in white, clear or a colour to suit.
Leave it or put it right?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk for an honest opinion and a quote.
Why Memsie customers choose us
- Any old sealant cut out fully, not covered over
- Domestic, commercial and hotel work
- White, clear, grey or another colour, product permitting
- Neat joints and a tidy finish
Read what affects the cost and our reviews.
Work for landlords, hotels and businesses
If you manage several properties in or around Memsie, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
When it isn’t the sealant
A few problems are outside what sealant work can do:
- A cracked shower tray or bath (that needs repair or replacement)
- Failed grout lines across the wall
- A leaking waste, trap or valve
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Surfaces we seal
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
Questions from Memsie
Is bathroom resealing in Memsie guaranteed?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Is Memsie in your area for bathroom resealing?
Yes. We work across all of Scotland, and Memsie is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear price.
Can new silicone go straight over the old?
No. Sealing over the top looks fine for a few weeks, then lifts. Every trace of the old bead is removed first.
My sealant has gone black. Can you sort it?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Can you reseal around my kitchen sink and worktop?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Do you remove the old sealant?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Do you work for hotels and businesses?
Yes. We have worked for hotels, offices and other businesses, and we’re fully insured.
How it works
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Outside jobs in Memsie need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Move anything stored near the joints
Ask for a quote
We quote each job on its own, so the first step is telling us about yours. Just email us at info@mrmastic.co.uk with the details.
Read more
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Use gentle cleaners on the silicone
- Never pick at the silicone with a blade
- Wait for the cure time we give you
- Wipe the sealant dry after showering
Don’t stand bottles along the bead, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Places near Memsie
Also in Memsie
How we quote for bathroom resealing
The quote reflects the job in front of us. We take into account:
- Working hours on commercial sites
- Any mould that needs treating
- The type of sealant required
- How many areas need sealing
Combining jobs into one visit usually makes better use of the time than several visits. We’ll give you a clear price for the lot.
What to tell us for a quote
You don’t need to know the technical terms. Just tell us:
- Any access issues, like height or stairs
- Any previous sealing or DIY work
- Roughly how big the job is
- Pictures of the joints, sent by email
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, email us at info@mrmastic.co.uk.