Aberdeenshire · Scotland
Floor Joint Sealing in Memsie
Floor joint sealing across Memsie and nearby, with old sealant always removed completely and a one-year guarantee.
- Worn sealant at door thresholds
- Caulk that has cracked where the floor moves
- Concrete floor joints that have broken down
Floor joint sealing for homes and businesses in Memsie
Good floor joints come down to the right product and clean, prepared edges. Old caulk, grout or failed sealant comes out first, the joint is cleaned and backed where needed, then the new sealant goes in. We work on wet room & bathroom floors, skirting boards and tiled floors, and people most often call us about gaps at thresholds between rooms and rigid edge joints in tiled floors.
Around smaller Scottish places like Memsie, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
You are covered for a year from the day we finish. If anything is not right with it, send an email to info@mrmastic.co.uk.
- Location
- Memsie (AB43)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Your questions about floor joint sealing in Memsie
What guarantee comes with floor joint sealing in Memsie?
All our work, in Memsie and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you do floor joint sealing in Memsie?
Yes, Memsie is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
What do you need from me for a quote?
Let us know what needs doing and where, with pictures by email if possible. We will ask anything else we need to know.
Do you use a paintable sealant?
Where you plan to paint, we do. Silicone does not take paint, so tell us your plans.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you seal warehouse floor joints?
Yes. We clean out the joints and reseal them with a product suited to the floor. Let us know about the traffic and we’ll quote.
How soon can the floor be mopped?
We give you a cure time for each joint. Feet are usually fine first, then mopping, then heavy wheels in most cases.
What floor joint sealing looks like in Memsie
Floors around Aberdeenshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal. Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.
In and around Memsie, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. Every kind of property in Memsie is covered for floor joint sealing, old or new, large or small. Every job comes with our 12-month guarantee. Across Aberdeenshire, we cover 161 places, Memsie among them. We also work in Aberdeen, about 35 miles from Memsie.
Jobs for floor joint sealing in AB43 is quoted and booked the same way as anywhere else. Floor joint sealing is available to properties on Cairn Close, Westcroft Close and Muir Road. Other places close to Memsie include Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). Further out, we also cover Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).
What’s near Memsie
Other landmarks nearby include Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). Not far away are Mormond Hill.
Leave it or put it right?
Not every floor joint takes the same sealant: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Using the wrong one is why many floor joints fail. In an older home around Memsie, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why book with us
- Full insurance on every job
- We leave the area clean and tidy
- You choose the colour before work begins
- Old sealant always removed completely
Read our cost guide and our reviews.
Surface by surface
Concrete floor joints
Sawn joints in concrete floors control where it cracks. We reseal them with a floor-joint product suited to the traffic.
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. Grout at the edge is removed and replaced with sealant.
Places near Memsie
What else we do in Memsie
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Common problems we fix in Memsie
An open floor joint fills with dirt and water. In kitchens and bathrooms, mop water gets into the gap and behind skirting and plinths.
Keep an eye out for any of the following:
- Dirt and water collecting in open floor joints
- Perimeter joints in tiled floors filled with grout
- Open gaps along the bottom of skirting boards
- Failed joint filler in concrete floors
Whether the job is in Memsie itself or nearby, the right material for each joint matters as much as a neat finish.
What your quote should include
- Whether they seal over old material or remove it
- Whether the sealant suits the joint
- How long the guarantee is
- Whether you can choose the colour
What happens on the day
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours, depending on the length of joint, depending on the size of the job. In smaller Scottish places, parking is normally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Old caulk, grout or sealant is removed from the joint.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Mention if the joints have been sealed before
- Let us know about parking restrictions
- Mention any leaks or damp you’ve noticed
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved.
Read more
What affects the quote in Memsie
You’ll get a clear quote before work begins. It’s based on:
- When we can work, for business premises
- Whether the work is at height
- How much there is to do
- Mould in or behind the old joints
Doing several joints on one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Asking for a quote
What to tell us when you ask for a quote:
- Photos by email, if that’s easy
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it has been sealed before
Getting a quote is simple: let us know what needs doing and where. A few pictures by email make the job easier to understand, and we will take it from there.
How to look after the new joints
So the new joints stay in good condition:
- Avoid caulk in bathrooms and kitchens
- Check skirting joints after the heating season
- Mark off resealed joints in warehouses
- Avoid sloshing water against skirting
Silicone sealant isn’t made to take paint. If you plan to paint, we’ll use a paintable product.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. Resealing early keeps it out.