Isle of Wight · England
Bathroom Resealing in Locksgreen
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Locksgreen and across the Isle of Wight. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Damp behind the bath or under the tray
- Black spots spreading through the bead
- Lumpy, uneven sealant from a DIY attempt
Locksgreen homes and their sealant
Locksgreen is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Whether the job is in Locksgreen itself or nearby, the right material for each joint matters as much as a neat finish.
Locksgreen is about 3 miles west of Newport, in the Isle of Wight. Wherever you are in the PO30 postcode area, our applicators can take on bathroom resealing. Locksgreen is one of 125 towns and villages in the Isle of Wight where we work for bathroom resealing. For nearby work, see our Southampton page.
Here we cover the PO30 postcode area for bathroom resealing. If you’re just outside Locksgreen, we cover Porchfield (1 mile north-east), Newtown (1 mile west), Great Thorness (1 mile north-east), Forest Side (2 miles east) and Noke Common (3 miles east). Further out, we also cover Newport (3 miles east), Ryde (9 miles east), Cowes (4 miles north-east), Sandown (10 miles south-east), Shanklin (10 miles south-east) and Ventnor (11 miles south-east). Remote and island addresses need a little more planning, so please mention your location when you ring 0345 464 0079 or send us an email.
Near you in Locksgreen
We work in homes and buildings around Sportsman's Rest pub, among other places. Other landmarks nearby include Calbourne Water Mill And Rural Museum (3 miles south-west) and Carisbrooke Castle (3.1 miles south-east). The countryside around Locksgreen includes Brighstone Down.
Bathroom resealing in Locksgreen
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. When it splits, shrinks or turns black, water gets behind it and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We work on basins & vanity units, shower trays & enclosures and sinks & splashbacks, and common reasons people get in touch are new sealant laid over old sealant that is now lifting and water escaping at the shower enclosure.
Around Locksgreen, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Locksgreen (PO30)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Locksgreen
More services for Locksgreen
Your questions about bathroom resealing in Locksgreen
Is bathroom resealing in Locksgreen guaranteed?
All our work, in Locksgreen and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Is Locksgreen within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Locksgreen and the rest of the Isle of Wight.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages to suit the site.
What colours of sealant can you use?
You are not limited to white: clear, white and colours chosen to suit the room. We can help you pick when we quote.
What affects the quote in Locksgreen
We don’t publish a price list. The quote depends on:
- Whether there’s mould to deal with
- The number of rooms or windows
- How much there is to do
- Access and height
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or email us.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- Pictures of the joints, sent by email
- The address or postcode of the job
- The problem you’ve noticed
Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
Aftercare tips
After the cure time, these simple habits help:
- Keep bottles off the sealant line
- Clean with a mild bathroom cleaner and a soft cloth
- Keep scourers and sharp tools away from the bead
- Check the joints every few months for splits or lifting
Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. A reseal in time can save the worktop.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Why act early in Locksgreen
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is generally all it takes, as long as the fittings themselves are sound. If something else is wrong, we will tell you. Around Locksgreen, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins.
Why book with us
- Every job guaranteed for a year
- Experience in homes, commercial sites and hotels
- White, clear, grey or coloured to suit, where the product allows
- You choose the colour before work begins
Read our cost guide or our reviews.
Honest limits
We’d rather tell you now than do work that won’t last, so these are the limits:
- A bath or tray that moves because it is not properly supported
- A tray or bath that is cracked through
- Failed grout lines across the wall
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly before you book.
What we seal
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Wet rooms
Common problems we fix in Locksgreen
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
Common reasons people contact us include:
- New sealant laid over old sealant that is now lifting
- Damp behind the bath or under the tray
- Water getting behind the kitchen upstand
- Smears of silicone across the tiles
In and around Locksgreen, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Comparing quotes
- How the joint is cleaned and prepared
- What guarantee comes with the work
- Who turns up on the day
- How hidden problems are handled
How the visit works
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work starts. Most jobs take a couple of hours for a single bath or shower. Somewhere as small as Locksgreen, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, normally after around 24 hours.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.