Hampshire · England
Leckford Bathroom Resealing
Specialist bathroom resealing for Leckford: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Cracked, shrunken or lifting silicone
- Two layers of silicone, both failing
- Leaks into the floor or ceiling below
What happens on the day
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is. Somewhere like Leckford needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
- Mention if the joints have been sealed before
How to get a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or send us an email.
Related advice
How we handle bathroom resealing in Leckford
Across Leckford, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We’re often asked to deal with splits where the tray meets the wall and black spots spreading through the bead, across wet rooms, basins & vanity units and kitchen worktops & upstands.
In a village or hamlet like Leckford, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All our work is covered by a one-year guarantee.
- Place
- Leckford (SO20)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Nearby places to Leckford
More services for Leckford
Leckford homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as Church of St Nicholas, timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you look after a building such as Test Valley School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Leckford is about 5 miles south of Andover, in Hampshire. Jobs in Leckford get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Across Hampshire, we cover 683 places, and Leckford is one of them. You can also see our page for Southampton, roughly 15 miles from Leckford.
Our applicators cover all of the SO20 postcode area for bathroom resealing. Neighbouring places we cover for bathroom resealing include Longstock (1 mile west), Fullerton (1 mile north), Cottonworth (1 mile north), Chilbolton (2 miles north-east) and Stockbridge (2 miles south-west). Larger places within reach include Winchester (8 miles south-east), Eastleigh (13 miles south-east), Andover (5 miles north), Totton (15 miles south), Chandler's Ford (11 miles south) and Romsey (10 miles south).
What’s near Leckford
We work in homes and buildings around The Peat Spade Public House and Longstock Park, among other places. A little further out are Andover War Memorial Hospital (5.6 miles north). For a walk, there’s Mill Lake.
How the job changes by surface
Basins & vanity units
A vanity top has a joint along the wall and sometimes at the sides. If water gets in, the cabinet underneath can swell, so the joint is sealed in one unbroken line.
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Honest limits
It helps to know what we cannot do:
- A cracked shower tray or bath (that needs repair or replacement)
- Cracked or missing grout between tiles (that’s regrouting)
- Tiles that have come away from the wall
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
- Wet rooms
Your questions about bathroom resealing in Leckford
What guarantee comes with bathroom resealing in Leckford?
All our work, in Leckford and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Do you cover Leckford for bathroom resealing?
Yes. Our work covers London and the South East, and Leckford is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing, and we will give you a clear price.
Do you do kitchens as well as bathrooms?
Yes. Kitchen joints get extra degreasing before the new bead goes on, then we reseal in a colour to suit.
My sealant has gone black. Can you sort it?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can you work on commercial sites?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
Can I choose the colour of the sealant?
White and clear are the most common choices, but other colours can be used to suit tiles and worktops. Tell us what you’d like when you get in touch.
Quotes for bathroom resealing in Leckford
There’s no set price list, because no two jobs are the same. What we look at:
- How many rooms, windows or areas are involved
- Access and height
- Any working-time requirements on site
- Whether there’s mould to deal with
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Helping us quote
Photos help, but a description is a good start. Please mention:
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Why act early in Leckford
Bleach and mould sprays may lighten black marks for a while, but where mould is inside the silicone it generally comes back. The lasting answer is to remove the bead and start again. Where a wall is exposed, as many are in small places like Leckford, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why Leckford clients choose us
- You choose the colour before work begins
- Over 20 years’ experience
- Approved under the ARBOMaster scheme
- Anti-fungal silicone where joints get wet
See our cost guide or our reviews.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Do not leave water standing on kitchen joints
- Give the silicone its full cure time
- Keep bottles off the sealant line
- Check the joints every few months for splits or lifting
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.