Na h-Eileanan Siar · Scotland
Bathroom & kitchen resealing in Laxdale, Na h-Eileanan Siar
Professional bathroom resealing in and around Laxdale, with old sealant always removed completely and a 12-month guarantee.
- Damp behind the bath or under the tray
- A reseal done over the top of the old bead
- Gaps where the bath or tray has moved
Bathroom resealing in Laxdale, done properly
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. If you’re dealing with a reseal done over the top of the old bead and leaks into the floor or ceiling below, we can put it right, whatever the surface.
Bathrooms in smaller places like Laxdale work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Laxdale (HS1, HS2)
- Region
- Na h-Eileanan Siar
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What the job involves on each surface
Basins & vanity units
On a basin, neatness shows: so we keep the line tidy and even, in white, clear or a colour to suit.
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.
The process
The work is kept neat and contained to the area we’re working on. The job normally takes half a day or less for one room, longer when the kitchen is included, and we explain the cure time before we leave. Outside jobs in Laxdale need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Mention any tricky access
- For indoor joints, keep the area dry beforehand if you can
- For business premises, tell us about site rules or sign-in
Ask for a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Read more
Why act early in Laxdale
Tired sealant isn’t a reason to replace a bath or shower. Replacing the joint is usually all it takes, provided the bath, tray and tiles are in good order. If something else is wrong, we’ll tell you. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Combining jobs into one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Why choose Mr Mastic in Laxdale
- White, clear, grey or another colour, product permitting
- 20+ years of sealant experience
- Colour picked to suit the job
- We agree the colour with you first
Take a look at what affects the cost or our reviews.
Laxdale: your questions answered
Can you do bathroom resealing in Laxdale?
Yes. Our work covers the whole of Scotland, and Laxdale is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
Will you come out to Laxdale?
Yes, Laxdale is covered. Our work covers the whole of Scotland, islands included, and smaller places are part of that. Longer journeys are simply planned in advance.
How long before the new sealant can get wet?
After around 24 hours in most cases. You will get the exact cure time before we leave.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk and let us know what needs doing and where.
Can landlords and businesses book you?
Yes, often. Several properties can go on one quote.
Can you get rid of the black mould in my sealant?
Yes. Once mould has grown into the silicone, it normally can’t be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
Do you reseal kitchen worktops and sinks too?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
Other services in Laxdale
What affects the cost of bathroom resealing
Call for a quick quote. What matters most is:
- The size of the job
- How many areas need sealing
- Working hours on commercial sites
- The product the joint needs
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll explain what it covers.
What to tell us for a quote
When you contact us, it’s useful to know:
- A few photos by email, if you can
- Where the job is, and your postcode
- The problem you’ve noticed
- Access, such as stairs, a lift or height
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, send an email to info@mrmastic.co.uk.
Laxdale homes and their sealant
Laxdale is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.
Around Laxdale, as everywhere, bathroom resealing is only as good as the preparation behind it. For jobs in and around Laxdale, choosing the right material for each joint is as important as a tidy finish.
Laxdale is about 1 mile north of Stornoway, in Na h-Eileanan Siar. Jobs in Laxdale get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 87 places across Na h-Eileanan Siar, from the larger towns to small villages.
Our applicators cover all of the HS1 and HS2 postcode area for bathroom resealing. Bathroom resealing is available to properties on Braes Road, Grant Square and Raven's Lane and the roads around them. Laxdale is on the A857, so it’s easy for us to get to with everything needed for bathroom resealing. Close by, we work in Newmarket (1 mile north), Stornoway (1 mile south), Steinis (2 miles south-east), Plasterfield (2 miles south-east) and Sandwick (2 miles south-east). Laxdale is one of the larger places we cover in Na h-Eileanan Siar. For island and remote addresses, a little more planning is needed.
What’s near Laxdale
Other landmarks nearby include Western Isles Hospital (0.5 miles south-east) and Lewis Loom Centre (1.1 miles south). Open spaces near Laxdale include Loch Àirigh na Lic and Ben Barvas.
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Squeegee the walls and tray after use
- Look for lifting corners and small gaps now and then
- Stick to a soft cloth and a mild cleaner
- Do not leave water standing on kitchen joints
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually won’t remove it. Catching it early keeps it a simple reseal.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.