Na h-Eileanan Siar · Scotland
Laxdale Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Laxdale. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps flagged on a fire risk assessment
- Open gaps behind door architraves
- New service routes left unsealed after building work
Fire rated sealant in Laxdale
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate. If you have door frames with gaps between frame and wall and gaps around pipes and cables through fire-resisting walls, we can help.
For holiday lets, guest houses and community buildings in or near Laxdale, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Where
- Laxdale (HS1, HS2)
- Wider area
- Na h-Eileanan Siar
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Your questions about fire rated sealant in Laxdale
Do you take on hotel work around Laxdale?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
How do Scotland’s building regulations apply to fire-rated sealant in Laxdale?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Do you offer different sealant colours?
We’ll suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
Can you give us a record of the work?
Yes. When the job is done, we give you the locations and products. Tell us if your assessor needs it in a particular format.
Do you work in Laxdale?
We do. Our applicators work in Laxdale.
What fire rating will the seal have?
We do not issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.
How much does fire rated sealant cost in Laxdale?
Every job is different, so each one gets its own quote. To get one, send an email to info@mrmastic.co.uk with a short description of the job.
When it isn’t the sealant
New sealant can’t fix everything, and we’ll tell you before any work starts. It will not solve:
- Problems with the door itself rather than the gap around the frame
- Assessing a building’s fire safety
- Issuing a fire rating or certificate for a building
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before booking.
Joints and surfaces we work on
- Linear gaps
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
What we do, step by step
You do not need to clear the whole room or building, only the area right around the joints. We protect the rest, and the work takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Getting ready for the visit
- Mention any parking rules near the property
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Related advice
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- The number of rooms or windows
- The product the joint needs
- Any mould that needs treating
- How much there is to do
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Any previous sealing or DIY work
- Roughly how big the job is
- Where the property is
- Access, such as stairs, a lift or height
For fire rated sealant in Laxdale, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before work begins.
For landlords and businesses
We work for landlords and agents as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
More services for Laxdale
Workplaces and buildings in Laxdale
If you run a hotel, guest house or holiday let in a coastal place like Laxdale, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
For jobs in and around Laxdale, choosing the right material for each joint is as important as a tidy finish.
Laxdale is about 1 mile north of Stornoway, in Na h-Eileanan Siar. We provide fire rated sealant to homeowners, landlords and businesses in Laxdale and the surrounding area. Laxdale is one of 87 places in Na h-Eileanan Siar we cover.
We work across the HS1 and HS2 postcode area for fire rated sealant and the streets around it. You’ll find streets such as Braes Road, Grant Square and Raven's Lane, all of which we cover. Being close to the A857, Laxdale is easy for our applicators to reach for fire rated sealant. If you are just outside Laxdale, we cover Newmarket (1 mile north), Stornoway (1 mile south), Steinis (2 miles south-east), Plasterfield (2 miles south-east) and Sandwick (2 miles south-east). Laxdale is among the bigger towns we cover in Na h-Eileanan Siar. If you are somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
What’s near Laxdale
Other landmarks nearby include Western Isles Hospital (0.5 miles south-east) and Lewis Loom Centre (1.1 miles south). Open spaces near Laxdale include Loch Àirigh na Lic and Ben Barvas.
How to look after the new joints
So the new joints stay in good condition:
- Ask which product was used before you paint
- Include fire stopping when you schedule refits
- Never patch a fire seal with standard sealant
- Tell trades working in the building that fire seals must be put back
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
Open gaps don’t only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Common problems we fix in Laxdale
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Keep an eye out for any of the following:
- Old fire sealant that has split or come away
- Gaps filled with a product that isn’t fire-rated
- Gaps where walls meet ceilings or slabs
- Fire stopping disturbed by later work
In and around Laxdale, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Comparing quotes
- How the colour is chosen
- How long to leave it before use
- Which sealant they’ll use, and why
- Whether all the old sealant comes out first