Na h-Eileanan Siar · Scotland

Laxdale Glazing Silicone

Glazing silicone for conservatories, rooflights, glass panels and shower screens for Laxdale, backed by a one-year guarantee. Call for a quick quote.

  • Drips on the inside of a conservatory window
  • Water getting into a conservatory at the joints
  • Black or yellowed silicone on glass joints

Glazing silicone for Laxdale homes and businesses

How we handle glazing silicone in Laxdale

Our work covers conservatory joints, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. Each joint is cut out, cleaned and resealed. If you have a quick top-up bead that didn’t last and water tracking down the inner face of the glass, we can put it right, whatever the surface.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Wind-driven rain finds any gap around a frame or sill.

All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.

Applicator reaching up to seal an external door frame on a sunny day
Place
Laxdale (HS1, HS2)
Region
Na h-Eileanan Siar
Cover
A year, on every job
Price
A clear price before work begins
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What the job involves on each surface

Glass-to-frame joints

Old sealant is removed carefully from the glass before new glazing silicone goes in.

Rooflights

A rooflight faces rain and sun from above. The sealant around the glass and frame wears faster than most.

The process

On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes a few hours for most jobs. Outdoor work around Laxdale depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.

  1. We look at the glazing and agree which joints need resealing.
  2. We cut away the failed silicone.
  3. We clean and prepare the joint.
  4. New glazing silicone goes in and is finished neatly.
  5. The joints are checked before we leave.

Preparing for the visit

  • Try not to wet indoor joints just before the visit
  • Tell us about access, such as stairs, a lift or high-level joints
  • Tell us about any previous sealing or DIY attempts

Get a quote

To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.

Get a quick quote

Read more

Leave it or put it right?

Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. In a place like Laxdale, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.

Leaving a failed joint usually makes the job bigger, not smaller. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.

Why choose Mr Mastic in Laxdale

  • Domestic, commercial and hotel work
  • Colour picked to suit the job
  • White, clear, grey or another colour, product permitting
  • Sanitary silicone with an anti-fungal additive in wet areas

Take a look at our cost guide or what customers say.

DIY sealant or a professional job?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

FAQs for Laxdale

Is Laxdale within the area you cover?

Yes, smaller places are covered as well as towns. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.

Is Laxdale in your area for glazing silicone?

Yes, Laxdale is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.

Do you work for landlords and businesses?

Yes, we do. We work in homes, commercial premises and hotels, and we’re fully insured.

Are you fully insured?

Yes. We’re fully insured, with over 20 years’ experience in sealant work.

Can you just put new silicone over the old?

Topping up is a common cause of leaks. A proper job means cutting out, cleaning and resealing.

Do you reseal glass shower screens?

We can. The old bead comes off without marking the glass, and the joints are cleaned and resealed.

Do I need to be at home?

It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.

What should I tell you?

Only a few details: the address or postcode, what’s wrong and any access issues. Then drop us a line at info@mrmastic.co.uk.

Work for landlords, hotels and businesses

From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.

What glazing silicone looks like in Laxdale

Laxdale is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Work on the islands has to be planned around ferry crossings and the weather, so give us as much notice as you can.

Whether the job is in Laxdale itself or nearby, the right material for each joint matters as much as a neat finish. Around Laxdale, as everywhere, glazing silicone is only as good as the preparation behind it.

Laxdale is about 1 mile north of Stornoway, in Na h-Eileanan Siar. Wherever you are in the HS1 postcode area, we can carry out glazing silicone at your property. Laxdale is one of 87 towns and villages in Na h-Eileanan Siar where we work.

Jobs for glazing silicone in HS1 and HS2 is quoted and booked the same way as anywhere else. Glazing silicone is available to properties on Braes Road, Grant Square and Raven's Lane and the roads around them. You’ll find Laxdale on the A857, which makes it straightforward to reach with everything needed for glazing silicone. We also cover Newmarket (1 mile north), Stornoway (1 mile south), Steinis (2 miles south-east), Plasterfield (2 miles south-east) and Sandwick (2 miles south-east). As one of the bigger places in Na h-Eileanan Siar, Laxdale has every kind of property, from flats to offices. For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.

Local landmarks in Laxdale

Well-known places in the area include Western Isles Hospital (0.5 miles south-east) and Lewis Loom Centre (1.1 miles south). The countryside around Laxdale includes Loch Àirigh na Lic and Ben Barvas.

Map of Laxdale © OpenStreetMap contributors

Quotes for glazing silicone in Laxdale

The price is agreed before any work begins. It’s based on:

  • Any mould that needs treating
  • The type of sealant required
  • Any working-time requirements on site
  • How many areas need sealing

A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.

Helping us quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • Access, such as stairs, a lift or height
  • What the problem is, such as mould, gaps, leaks or cracking
  • Whether it’s a home or a business
  • A few photos by email, if you can

We quote each job on its own, so the first step is telling us about yours. Just email us at info@mrmastic.co.uk with the details, and pictures are welcome.

How to look after the new joints

A little care helps the new joints last. Our advice:

  • Keep harsh solvents off the silicone
  • Avoid scraping close to the bead
  • Check the gutters above the glazing for debris
  • Keep air moving in the conservatory

Clear the conservatory gutters regularly, so water drains away from the joints. Overflowing gutters can cause leaks of their own.

Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below long before you see it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job