Highland · Scotland
Bathroom Resealing in Invermoriston
Bath, shower, basin, wet room, worktop and sink resealing in Invermoriston, with a 12-month guarantee on every job. Call for a quick quote.
- Water getting behind the bath panel
- Cracked, shrunken or lifting silicone
- A joint torn by a bath that flexes
About our bathroom resealing in Invermoriston
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. Once it cracks or goes mouldy, water starts to find its way through and into the wall or floor. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. If you have sealant that has split, shrunk or peeled away and a reseal done over the top of the old bead, we can put it right.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
Our work is backed for twelve months, in Invermoriston and everywhere else we cover.
- Place
- Invermoriston (IV63)
- Region
- Highland
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlord and commercial work in Invermoriston
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can be quoted together.
How the job changes by surface
Wet rooms
Wet room floors move slightly as they’re used, so the internal corners need silicone rather than grout. Where grout in a corner has cracked, we can replace it with sealant.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A continuous bead along the back keeps water out.
Do you need bathroom resealing in Invermoriston?
Silicone doesn’t last for ever. Every shower, every splash and every wipe with a cleaner take their toll over the years, and how long it lasts comes down to use, cleaning and ventilation.
Common reasons people contact us include:
- Sealant that has split, shrunk or peeled away
- Black mould in the silicone that won’t clean off
- Gaps where the bath or tray has moved
- Smears of silicone across the tiles
In and around Invermoriston, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Comparing quotes
- How long the guarantee is
- What insurance they hold
- Whether VAT is included
- Whether all the old sealant comes out first
Bathrooms and kitchens in Invermoriston
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.
If you live in an older home near Church of Scotland, walls and floors in older homes can move, and sealant and grout show it first.
Invermoriston is about 23 miles south-west of Inverness, in Highland. Jobs in Invermoriston get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Invermoriston is one of 253 towns and villages in Highland where we work.
Postcode districts we cover here for bathroom resealing: IV63. Streets in the area include Riverside Park and Glendale Park, and we cover them all. We also cover the places around Invermoriston: Stratherrick (4 miles south-east), Fort Augustus (5 miles south-west), Gorthleck (7 miles east), Glen Moriston (7 miles south-west) and Newtown (9 miles south-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Near you in Invermoriston
Not far away are Loch a' Mheig and Càrn an t-Seana-bhlàir.
What we do, step by step
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes around two hours for one bath or shower, longer for a whole bathroom in most cases. Around Invermoriston, distance and access matter more than parking. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- For indoor joints, keep the area dry beforehand if you can
- Keep pets and children clear of the area while we work
Getting a quote
If you are in Invermoriston and need bathroom resealing, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.
Related advice
Invermoriston: your questions answered
Can you do bathroom resealing in Invermoriston?
Yes, Invermoriston is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Is there a guarantee on bathroom resealing in Invermoriston?
All our work, in Invermoriston and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
What does bathroom resealing cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we will talk you through it.
Where are you based?
Our base is Crawley. We work across South East England, London and Scotland.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
How long will the resealing take?
It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
When something else is needed
We’d rather tell you now than do work that will not last, so these are the limits:
- A cracked shower tray or bath (that needs repair or replacement)
- Tiles that have come away from the wall
- A tray that rocks until it’s re-bedded
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think before you book.
Surfaces we seal
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Wet rooms
- Shower trays & enclosures
Towns and villages near Invermoriston
Also in Invermoriston
Leave it or put it right?
Bleach and mould sprays may lighten black marks for a while, but where mould is inside the silicone it usually comes back. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why Invermoriston clients choose us
- 4.9 on Google from 180+ five-star reviews
- 20+ years of sealant experience
- A sealant colour to suit the surroundings
- We agree the colour with you first
See our cost guide or what customers say.