Hampshire · England
Bathroom & kitchen resealing in Hunton, Hampshire
Bathroom resealing for Hunton and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- A reseal done over the top of the old bead
- Smears of silicone across the tiles
- Gaps between the worktop and the wall
How we handle bathroom resealing in Hunton
Resealing is a small job that makes a big difference. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We work on basins & vanity units, wet rooms and shower trays & enclosures, and the jobs we see most are leaking joints on a shower screen and water getting behind the kitchen upstand.
Around Hunton, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Whatever the size of the job, it’s backed by our one-year guarantee.

- Place
- Hunton (SO21)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
For landlords and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured for the work.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Squeegee the walls and tray after use
- Avoid abrasive pads on the sealant
- Use gentle cleaners on the silicone
- Check the joints every few months for splits or lifting
Give the silicone time to cure before it gets wet, which is generally around 24 hours. After that, a quick wipe after showering helps keep it clean.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Water coming from the plumbing rather than the joint
- A tray or bath that’s cracked through
- Cracked or missing grout between tiles (that’s regrouting)
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
Do you need bathroom resealing in Hunton?
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
The most common problems we see are:
- Gaps where the bath or tray has moved
- Shrunken sealant along the back of a worktop
- Cracked, shrunken or lifting silicone
- Black mould in the silicone that will not clean off
If you live in an older home near Church of St James, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Comparing quotes
- How the surfaces are prepared before sealing
- What product goes in the joint
- Whether they’re fully insured
- How the colour is chosen
Questions from Hunton
Is Hunton within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Micheldever station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Can you just seal over the old silicone?
No. New silicone will not bond to old silicone, so it peels away and hides mould and water. We always take the old sealant out completely.
Can you do several jobs on one visit?
Yes. Just list everything you need.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Do you guarantee your resealing?
Yes, for 12 months. Looking after the joint as we suggest helps it last.
How long does the new silicone need before I use the shower?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it can’t stick to what’s underneath. Water creeps under it and mould follows. Older cottages and farmhouses around Hunton can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
Why choose Mr Mastic in Hunton
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
- Over 20 years’ experience
- Every job guaranteed for a year
Take a look at how sealant jobs are priced or customer reviews.
Hunton homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Letting a property close to Micheldever station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Hunton is about 7 miles north of Winchester, in Hampshire. Every kind of property in Hunton can book us for bathroom resealing. The work is guaranteed for a year. Hunton is one of 683 towns and villages in Hampshire where we work. There’s also a page for Southampton, about 17 miles away.
Here we cover the SO21 postcode area for bathroom resealing. Neighbouring places we cover for bathroom resealing include Stoke Charity (1 mile south-east), Egypt (1 mile west), Sutton Scotney (1 mile west), South Wonston (3 miles south) and Barton Stacey (3 miles west). Within a short drive, we also cover Basingstoke (12 miles north-east), Winchester (7 miles south), Eastleigh (13 miles south), Andover (8 miles north-west), Chandler's Ford (12 miles south) and Alton (15 miles east).
Local landmarks in Hunton
Around Hunton, our work takes us to homes and buildings near The Wonston Arms and the streets around them. For rail, the closest station is Micheldever station, roughly 2.9 miles north-east of the centre.
DIY versus a professional finish
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
How it works
The work is kept neat and contained to the joints we are treating, so you can get on with your day. The job normally takes around two hours for one bath or shower, longer for a whole bathroom, and we explain the cure time before we leave. For a village or hamlet like Hunton, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Plan for the work area to be out of bounds to pets and children
- Tell us about access, such as stairs, a lift or high-level joints
- Clear the area around the work
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.
