Shetland Islands · Scotland
Bathroom Resealing in Hillswick
Bathroom resealing in Hillswick from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Mouldy sealant that has gone black
- Smears of silicone across the tiles
- Two layers of silicone, both failing
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Bathroom resealing for homes and businesses in Hillswick
Across Hillswick, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. If you are dealing with new sealant laid over old sealant that is now lifting and a bead that has pulled away from the tiles, we can help.
In and around a place like Hillswick, homes range from older stone-built properties to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Hillswick (ZE2)
- Region
- Shetland Islands
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What bathroom resealing looks like in Hillswick
Hillswick is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Island jobs need planning around ferries and the weather, so give us as much notice as you can.
In the older streets around Northmavine Parish Church and Churchyard, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Hillswick is in the Shetland Islands. Hillswick gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Hillswick is one of 63 towns and villages in the Shetland Islands we cover for bathroom resealing.
Every address in ZE2 is within our area for bathroom resealing, from the main roads to the quietest streets. Close by, we work in Urafirth (1 mile north-east), Braehoulland (3 miles north-west), Hogaland (4 miles east), Sullom (5 miles south-east) and Ollaberry (5 miles east). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Near you in Hillswick
In Hillswick, that means homes and buildings near The Booth pub. A little further out are Tangwick Haa Museum (3.4 miles west). For a walk, there’s Ness-houlls Water.
What else we do in Hillswick
Quotes for bathroom resealing in Hillswick
Some jobs are bigger than they look, and some smaller. The main factors:
- How many areas need sealing
- The size of the job
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
Leaving a failed joint normally makes the job bigger, not smaller. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
When you contact us, these details help:
- Where the property is
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
- How we’d reach the joints
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, email us at info@mrmastic.co.uk.
For landlords and businesses
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured for the work.
Hillswick: your questions answered
Can you do bathroom resealing in Hillswick?
Yes. Our work covers the whole of Scotland, and Hillswick is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Is bathroom resealing in Hillswick guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Is there any odour?
Some sealants have a smell while they cure. Ventilation helps.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
What sealant do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We will tell you what we are using and why.
Do you do commercial work?
Yes. We’ve worked for hotels, offices and other businesses and we are fully insured.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
Is it OK to put new sealant on top of the old bead?
No. New silicone won’t bond to old silicone, so it peels away and hides mould and water. All the old sealant comes out first.
How it works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes half a day or less for one room, longer when the kitchen is included and we leave things clean and tidy. Around Hillswick, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Clear items away from the joints we’re working on
Getting a quote
Every job is quoted individually. Simply drop us a line at info@mrmastic.co.uk and describe the job and send photos if you have them.
Read more
When something else is needed
In fairness, some problems need a different trade:
- A bath or tray that moves because it isn’t properly supported
- Water coming from the plumbing rather than the joint
- Failed grout lines across the wall
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Baths
Signs you need bathroom resealing in Hillswick
Mould is the reason many people want their sealant replaced. Bathrooms without good ventilation give mould all the damp it needs, and mould that has grown into the silicone usually will not clean off.
Signs it’s time to call us include:
- Leaking joints on a shower screen
- Damp behind the bath or under the tray
- New sealant laid over old sealant that is now lifting
- A bead that has pulled away from the tiles
In and around Hillswick, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
What to look for in a quote
- Which sealant they’ll use, and why
- The length of the guarantee
- Whether they’re fully insured
- Whether all the old sealant comes out first
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Use gentle cleaners on the silicone
- Wipe up water along the back of the worktop
- Wait for the cure time we give you
- Never pick at the silicone with a blade
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually will not remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.