Kent · England
Bathroom & kitchen resealing in Highstreet, Kent
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Highstreet. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Damp behind the bath or under the tray
- A messy, uneven bead from a previous reseal
- A bead that has pulled away from the tiles
Bathroom resealing for homes and businesses in Highstreet
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Highstreet. We’re ARBOMaster approved and fully insured, and every job carries our one-year guarantee. If you’re dealing with failed sealant on the screen profile and a reseal done over the top of the old bead, we can help.
Being in a small place like Highstreet makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Place
- Highstreet (ME13)
- Region
- Kent
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlords, agents and businesses in Highstreet
Letting agents and landlords in Highstreet can book us as well as householders. Resealing between tenancies keeps a property looking cared for.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Bathroom resealing around Highstreet
Highstreet is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Around Highstreet, as everywhere, bathroom resealing is only as good as the preparation behind it.
Highstreet is about 3 miles south-west of Whitstable, in Kent. From the centre of Highstreet to the outskirts, bathroom resealing is available for homes and businesses alike. 922 places in Kent are on our list, large and small. Our Chelmsford page covers work nearby (36 miles or so).
Here we cover the ME13 postcode area for bathroom resealing. Local streets include Thanet Way and Highstreet Road, all of which we cover. We also cover the places around Highstreet: Waterham (1 mile west), Dargate (1 mile south-west), Seasalter (1 mile north), Hernhill (2 miles south-west) and Slutshole (2 miles south-west). We also work in nearby towns such as Ashford (14 miles south), Canterbury (5 miles south-east), Sittingbourne (11 miles west), Whitstable (3 miles north-east), Faversham (4 miles west) and Herne Bay (7 miles north-east).
Around Highstreet
Locally, jobs take us to homes and businesses close to Foxes Cross Bottom. The nearest railway station is Whitstable station, roughly 3 miles north-east of the centre. Other landmarks nearby include Whitstable and Tankerton Hospital (3.6 miles north-east) and Tankerton Castle (3.3 miles north-east). The countryside around Highstreet includes Blean Woods RSPB Reserve.
What affects the quote in Highstreet
Your quote is based on your job. We look at:
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- Access and height
- Which sealant suits the joint
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Photos by email, if that is easy
- Where the property is
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, ring 0345 464 0079 or send us an email.
How the job changes by surface
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We check the joints and say so if the fault looks to be elsewhere.
Why act early in Highstreet
Sorting it now is quick: it takes half a day or less for one room, longer when the kitchen is included. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Around Highstreet, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins.
Why Highstreet customers choose us
- Colour picked to suit the job
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- Any old sealant cut out fully, not covered over
Read how sealant jobs are priced or our reviews.
What else we do in Highstreet
What we’re called out for in Highstreet
Not every tube in the shop is meant for a shower. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they crack, discolour or grow mould quickly. A bathroom joint needs anti-fungal sanitary silicone.
It’s worth asking for a quote if you see:
- Damp behind the bath or under the tray
- Water escaping at the shower enclosure
- Lumpy, uneven sealant from a DIY attempt
- Gaps where the bath or tray has moved
Rented homes near Whitstable station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- Whether the sealant suits the joint
- Is VAT in the price?
- Which colour the sealant will be
- Who turns up on the day
FAQs for Highstreet
Do you work for landlords with property near Whitstable station?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do you cover Highstreet for bathroom resealing?
Yes. Our work covers London and the South East, and Highstreet is part of that. You can call 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear price.
How long does it take to reseal a bath or shower?
It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.
Can you just seal over the old silicone?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
How long before the new sealant can get wet?
After around 24 hours in most cases. We will tell you the cure time for the product we used.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can I choose the colour of the sealant?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
How it works
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. Most jobs take half a day or less for one room, longer when the kitchen is included. Somewhere as small as Highstreet, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
How to get a quote
Need a quote? Please phone 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and give you a clear price before we start.
Related advice
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Don’t leave water standing on kitchen joints
- Avoid abrasive pads on the sealant
- Wait for the cure time we give you
- Keep bottles off the sealant line
Keep bottles and razors off the sealant line, because they trap water against the silicone. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Replacing the sealant early keeps the job small.