Windsor and Maidenhead · England
Bathroom & kitchen resealing in Cold Harbour, Windsor and Maidenhead
Bath, shower, basin, wet room, worktop and sink resealing for Cold Harbour, backed by a one-year guarantee. Call for a quick quote.
- Leaking joints on a shower screen
- Leaks into the floor or ceiling below
- A reseal done over the top of the old bead
Cold Harbour questions
Do you work for landlords with property near Wargrave station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.
Do you cover smaller places like Cold Harbour?
Yes. Cold Harbour is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How do I get a quote for bathroom resealing in Cold Harbour?
Size, access and the old material all affect the cost. Ask us for a quote.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. Indoors, that generally means someone at home.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
Is there any odour?
Possibly a little. It fades as the sealant cures.
Do you take out the old sealant first?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
How long before the new sealant can get wet?
We give you the cure time before we leave, and it’s generally around 24 hours. Using it sooner can damage the bead.
Bathroom resealing for homes and businesses in Cold Harbour
Kitchens need the same care as bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water that gets into the back edge of a worktop can swell the board. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. We work on baths, kitchen worktops & upstands and wet rooms, and people most often call us about water escaping at the shower enclosure and water getting behind the bath panel.
In a village or hamlet like Cold Harbour, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Your job is guaranteed for a year, as with all our work.
- Place
- Cold Harbour (SL6)
- Wider area
- Windsor and Maidenhead
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
If you manage several properties in or around Cold Harbour, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
How we quote for bathroom resealing
Your quote is based on your job. We look at:
- Whether there’s mould to deal with
- The amount of work
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
When you contact us, these details help:
- The type of property
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
- The address or postcode of the job
If you are in Cold Harbour and need bathroom resealing, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
How the visit works
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take around two hours for one bath or shower, longer for a whole bathroom. For a village or hamlet like Cold Harbour, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Tell us about any water getting in
- Let us know about parking restrictions
- Plan for the work area to be out of bounds to pets and children
How to get a quote
To get a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Related advice
How the job changes by surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A continuous bead along the back keeps water out.
Baths
Baths move more than any other fitting, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest.
What we’re called out for in Cold Harbour
Baths and trays move. An acrylic bath flexes under load, and a tray that isn’t fully bedded can rock. That movement works at the bead until it splits or peels away.
Signs it’s time to call us include:
- Leaks into the floor or ceiling below
- Leaking joints on a shower screen
- Gaps where the bath or tray has moved
- Mouldy sealant that has gone black
Managing a site like Knowl Hill Church of England Primary Academy? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before you book
- Whether they’re fully insured
- What the quote includes, VAT included or not
- What preparation is included
- How the colour is chosen
Why act early in Cold Harbour
Running new silicone over the old joint can look tidy for a few weeks, but it cannot stick to what’s underneath. Water creeps under it and mould follows. Where a wall is exposed, as many are in small places like Cold Harbour, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
Why Cold Harbour customers choose us
- Colour agreed with you before any work starts
- Domestic, commercial and hotel work
- Old sealant always removed completely
- 180+ five-star Google reviews
Take a look at what affects the cost or what customers say.
Nearby places to Cold Harbour
What else we do in Cold Harbour
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Cold Harbour homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For landlords with property near Wargrave station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. In the older streets around Saint Peter, walls and floors in older homes can move, and sealant and grout show it first.
Cold Harbour is about 3 miles west of Maidenhead, in Windsor and Maidenhead. Jobs in Cold Harbour get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. 57 places in Windsor and Maidenhead are on our list, from the larger towns to small villages. Reading is on our list too, about 9 miles from Cold Harbour.
Jobs for bathroom resealing in SL6 is quoted and booked the same way as anywhere else. Close by, we work in Knowl Hill (1 mile north-west), Warren Row (1 mile north-west), Bowsey Hill (2 miles west), Cockpole Green (3 miles north-west) and Wargrave (3 miles west). Larger places within reach include Maidenhead (3 miles east), Windsor (8 miles east), Boyn Hill (3 miles east), North Ascot (8 miles south-east), Cookham (5 miles north-east) and Furze Platt (3 miles north-east).
Around Cold Harbour
Locally, jobs take us to homes and businesses close to Cox Green School and The Royal Oak pub and the streets around them. The closest station to Cold Harbour is Wargrave station, roughly 3.3 miles west of the centre. A little further out are St Mark's Hospital (2.8 miles north-east). Green spaces nearby include Hurley Chalk Pit and Taplow Lake.