Medway · England
Bathroom Resealing in Cliffe Woods
Baths, showers and worktops in Cliffe Woods need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Smears of silicone across the tiles
- Water escaping at the shower enclosure
- Two layers of silicone, both failing
Landlord and commercial work in Cliffe Woods
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Bathroom resealing for homes and businesses in Cliffe Woods
Homes in Cliffe Woods have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. We’re often asked to deal with splits where the tray meets the wall and water getting behind the kitchen upstand, across basins & vanity units, sinks & splashbacks and kitchen worktops & upstands.
Around Cliffe Woods, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
Your job is guaranteed for a year, as with all our work.
- Place
- Cliffe Woods (ME3)
- Region
- Medway
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Cliffe Woods homes and their sealant
Cliffe Woods is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Cliffe Woods Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Cliffe Woods is about 3 miles north of Rochester, in Medway. For bathroom resealing in and around Cliffe Woods, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We are based in Crawley and cover Medway, Cliffe Woods included. Cliffe Woods is one of 68 places in Medway where we work for bathroom resealing. Chelmsford is on our list too, about 21 miles from Cliffe Woods.
Here we cover the ME3 postcode area for bathroom resealing. If you need bathroom resealing at a property on Cardens Road, View Road and Brewer Road or anywhere close by, our applicators can take on the job. If you’re just outside Cliffe Woods, we cover Mockbeggar (1 mile south-west), Church Street (1 mile west), Lower Higham (2 miles west), Cliffe (2 miles north) and Higham (2 miles south-west). Further out, we also cover Gillingham (5 miles south-east), Chatham (5 miles south), Rochester (3 miles south), Rainham (7 miles south-east), Strood (3 miles south) and Luton (5 miles south).
Near you in Cliffe Woods
Locally, jobs take us to homes and businesses close to The Hundred of Hoo Academy and the streets around them. For rail, the closest station is Higham station, about 1.5 miles west of the centre. A little further out are Huguenot Museum (3.1 miles south) and Pentagon Shopping Centre (3.6 miles south). Open spaces near Cliffe Woods include Gad's Hill and Rede Common.
Cliffe Woods questions
Is Cliffe Woods in your area for bathroom resealing?
Yes. Our work covers London and the South East, and Cliffe Woods is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Is Cliffe Woods within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
When can I use the bath or shower again?
Generally after around 24 hours. We will tell you the cure time for the product we used.
Do you guarantee your resealing?
Yes. Our 12-month guarantee covers every job, and we are ARBOMaster approved applicators.
Do you do kitchens as well as bathrooms?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Do the sealants smell?
Some sealants have a smell while they cure, but it fades. Opening a window helps.
Can you just seal over the old silicone?
No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
What we are called out for in Cliffe Woods
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
The problems people usually mention when they call are:
- Shrunken sealant along the back of a worktop
- Water escaping at the shower enclosure
- A reseal done over the top of the old bead
- Damp behind the bath or under the tray
If you let a flat or house near Higham station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
What your quote should include
- How hidden problems are handled
- When the joint can take water or movement
- How the joint is cleaned and prepared
- Whether the sealant suits the joint
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
When it is not the sealant
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- A bath or tray that moves because it is not properly supported
- A cracked shower tray or bath (that needs repair or replacement)
- Water coming from the plumbing rather than the joint
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before you book.
Surfaces we seal
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & upstands
- Shower trays & enclosures
- Sinks & splashbacks
What affects the cost of bathroom resealing
You will get a clear quote before work begins. It takes into account:
- Mould in or behind the old joints
- Whether the work is at height
- The product the joint needs
- Whether old sealant or filler has to be cut out
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- Any access issues, like height or stairs
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- If someone has resealed it before
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or drop us an email.
Leave it or put it right?
Sorting it now is quick: it takes a couple of hours for a single bath or shower. Wait for a leak and you may be looking at panels off, drying out and redecorating too. Where a wall is exposed, as many are in small places like Cliffe Woods, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Why Cliffe Woods customers choose us
- Anti-fungal sanitary silicone in wet areas
- White, clear, grey or coloured to suit, where the product allows
- Trusted Arbo and Everbuild sealants
- ARBOMaster approved applicator
Take a look at our cost guide or customer reviews.
Towns and villages near Cliffe Woods
More services for Cliffe Woods
What happens on the day
When we arrive, we look over the joints with you first. We protect the surfaces around the joints before any work begins. The work generally takes around two hours for one bath or shower, longer for a whole bathroom. In a small place like Cliffe Woods, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
Before we arrive
- Clear items away from the joints we are working on
- Tell us if parking is tricky
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.