Highland · Scotland
Bathroom & kitchen resealing in Brough, Highland
Professional bathroom resealing in and around Brough, with old sealant always removed completely.
- Gaps between the worktop and the wall
- Damp behind the bath or under the tray
- Gaps where the bath or tray has moved
Bathroom resealing in Brough
Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. If you have splits where the tray meets the wall and shrunken sealant along the back of a worktop, we can help, on wet rooms, sinks & splashbacks and kitchen worktops & upstands alike.
Bathrooms in smaller places like Brough work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
There’s a 12-month guarantee on every job, large or small.
- Where
- Brough (KW14)
- Region
- Highland
- Cover
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Surface by surface
Wet rooms
A wet room floor and its walls can move independently, so the internal corners need silicone rather than grout. Cracked grout in a corner can be cut out and replaced with silicone.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A continuous bead along the back keeps water out, as long as the worktop itself is firmly fixed.
Bathrooms and kitchens in Brough
Brough is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In and around Brough, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Brough is about 7 miles north-east of Thurso, in Highland. We provide bathroom resealing to householders, landlords and businesses in Brough and the surrounding area. Across Highland, we cover 253 places, Brough among them.
We work across the KW14 postcode area for bathroom resealing. Brough is on the B855, which makes it straightforward to reach. Other places close to Brough include Dunnet (2 miles south), Scarfskerry (3 miles east), Rattar (3 miles east), Castletown (4 miles south) and Murkle (5 miles south-west). For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.
Landmarks near Brough
Well-known places in the area include Westside Croft (1.6 miles south) and Castle of Mey (4.8 miles east). Open spaces near Brough include Sanders Loch.
Your questions about bathroom resealing in Brough
Do you cover Brough for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Brough is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear price.
What guarantee comes with bathroom resealing in Brough?
All our work, in Brough and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you just seal over the old silicone?
No, never. Sealing over the top looks fine for a few weeks, then lifts. We remove the old bead completely before resealing.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
What do you need from me for a quote?
Tell us what needs doing and where, with photos by email if possible. We will ask anything else we need to know.
How long does the new silicone need before I use the shower?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Places near Brough
What else we do in Brough
What we are called out for in Brough
Not every tube in the shop is meant for a shower. Acrylic caulk and general-purpose sealants aren’t designed for a joint that is wet every day, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
If you can see any of these, it’s time to have the joints looked at:
- A messy, uneven bead from a previous reseal
- Cracked, shrunken or lifting silicone
- Mouldy sealant that has gone black
- Two layers of silicone, both failing
Whether the job is in Brough itself or nearby, the right material for each joint matters as much as a neat finish.
What your quote should include
- Whether they seal over old material or remove it
- How hidden problems are handled
- What insurance they hold
- How the surfaces are prepared before sealing
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
For anyone letting property in or around Brough, several properties can go on one quote. Send us the addresses and the work at each.
How the visit works
At the end, we look at the finished work together. The work normally takes around two hours for one bath or shower, longer for a whole bathroom, depending on the size of the job. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, normally around 24 hours.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Clear items away from the joints we’re working on
- Mention any leaks or damp you’ve noticed
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear quote.
Related advice
Quotes for bathroom resealing in Brough
We quote each job individually. These are the things that affect it:
- The amount of work
- Mould in or behind the old joints
- The number of rooms or windows
- The product the joint needs
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
You don’t need to know the technical terms. Just tell us:
- A few photos by email, if you can
- The problem you’ve noticed
- Roughly how big the job is
- How we’d reach the joints
For bathroom resealing in Brough, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Move toiletries away from the joint
- Keep an eye on the corners, where splits start
- Keep scourers and sharp tools away from the bead
- Wipe up water along the back of the worktop
Clean the silicone with care: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.