Highland · Scotland
Glazing & conservatory sealant in Brough, Highland
Our applicators work in Brough on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.
- New silicone smeared over old sealant
- Rooflight joints letting water in
- Leaks from the base of a shower screen
How the visit works
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. The job usually takes anything from an hour or two to most of a day, depending on the size of the job, and we explain the cure time before we leave. For a place like Brough, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We start by finding the leak and making sure sealant is the cause.
- Old silicone is cut away from the glass and frame without scratching either.
- The glass and frame are cleaned and degreased.
- Glazing silicone suited to the joint is applied and tooled.
- We check the joints and, where safe, run water over them.
Getting ready for the visit
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
- Let us know if you’ve seen damp or leaks
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear price.
Advice
About our glazing silicone in Brough
Glazing silicone that has yellowed, blackened or come away spoils the look and lets water in. It comes off cleanly, without marking the glass before the new bead goes in. If you are dealing with leaking glazing joints on a rooflight and water tracking down the inner face of the glass, we can put it right, on shower screens, glass-to-glass joints and glass balustrade bases alike.
Outdoor sealant needs a dry surface, so window work around Brough is planned around the weather, and longer journeys are planned in advance. Let us know about access to every frame, including any upstairs.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Brough (KW14)
- Wider area
- Highland
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Nearby places to Brough
More services for Brough
Windows and doors in Brough
Brough is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on glazing joints and frame seals, especially on the side facing the sea. Sash and case windows are common in older Scottish homes, often pointed into the wall with traditional sand mastic.
Around Brough, as everywhere, glazing silicone is only as good as the preparation behind it. Castle of Mey, about 4.8 miles east, is one of the historic houses in the wider area around Brough.
Brough is about 7 miles north-east of Thurso, in Highland. Whether you’re in the middle of Brough or further out, we cover glazing silicone for every kind of property. Brough is one of 253 towns and villages in Highland we cover.
Here we cover the KW14 postcode area for glazing silicone. Brough is on the B855, which makes it straightforward to reach with everything needed for glazing silicone. We also cover Dunnet (2 miles south), Scarfskerry (3 miles east), Rattar (3 miles east), Castletown (4 miles south) and Murkle (5 miles south-west). Island and remote addresses take a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
What’s near Brough
Other landmarks nearby include Westside Croft (1.6 miles south) and Castle of Mey (4.8 miles east). Green spaces nearby include Sanders Loch.
What we can’t put right
To be straight with you, there are a few things sealant will not fix:
- Glass that needs replacing
- Rotten or badly damaged frames
- Structural problems with a conservatory roof
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
What we seal
- Glass-to-glass joints
- Glass-to-frame joints
- Glass balustrade bases
- Rooflights
- Conservatory frames
- Shower screens
Landlords, agents and businesses in Brough
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Questions from Brough
Will you come out to Brough?
Yes. Brough is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Does the coastal weather in Brough affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. Walls facing the sea are usually the first to need attention.
How long does the job take?
Most jobs take anything from an hour or two to most of a day, depending on the size of the job, including the preparation. Your quote will say how long we expect yours to take.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Do you reseal glass shower screens?
Yes, we do these often. We use anti-fungal silicone made for wet areas.
Where are you based?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Do you guarantee glazing sealant work?
Our 12-month guarantee applies to every job we do.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
How the job changes by surface
Glass balustrade bases
The base joint is cut out and resealed. We do not install or replace glass.
Shower screens
Silicone holds the water in on frameless screens. We renew it without marking the glass.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
What affects the cost of glazing silicone
The price is agreed before any work begins. It takes into account:
- How many rooms, windows or areas are involved
- How easy the joints are to reach
- The type of sealant required
- When we can work, for business premises
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
What to tell us when you ask for a quote:
- The type of property
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- A few photos by email, if you can
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Leave it or put it right?
Replacing windows or a shower screen isn’t needed for a failed joint. If the glass and frame are sound, new silicone is often all it takes. In an older home around Brough, damp from a failed joint can get into timber and plaster.
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first.
Why book with us
- ARBOMaster approved applicator
- A sealant colour to suit the surroundings
- We leave the area clean and tidy
- Over 20 years’ experience