Kent · England
Bathroom Resealing in Broom Street
Problem with your baths, showers and worktops in Broom Street? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- New sealant laid over old sealant that is now lifting
- Black mould in the silicone that won’t clean off
- A joint torn by a bath that flexes
Landlords, agents and businesses in Broom Street
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Bathroom resealing in Broom Street
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. Once it cracks or goes mouldy, water starts to find its way through into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. Common call-outs are for leaks into the floor or ceiling below and lumpy, uneven sealant from a DIY attempt, on basins & vanity units, kitchen worktops & upstands and sinks & splashbacks.
For a small place like Broom Street, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Broom Street (ME13)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Broom Street homes and their sealant
Broom Street is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Faversham station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Broom Street is about 2 miles east of Faversham, in Kent. From the centre of Broom Street to the outskirts, we cover bathroom resealing for every kind of property. Broom Street is one of 922 places in Kent we cover. You can also see our page for Chelmsford, about 34 miles away.
Our applicators cover all of the ME13 postcode area for bathroom resealing and the streets around it. Neighbouring places we cover for bathroom resealing include Graveney (1 mile south-east), Culmers (1 mile south-east), Goodnestone (1 mile south), Slutshole (2 miles south-east) and Hernhill (2 miles south-east). We also work in nearby towns such as Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (5 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
Landmarks near Broom Street
Typical jobs here are in homes near South Swale and Queen Elizabeth's Grammar School, among other places. Broom Street’s nearest station is Faversham station, about 2.1 miles south-west. Well-known places in the area include Whitstable and Tankerton Hospital (5.6 miles north-east).
How the job changes by surface
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They get anti-fungal sanitary silicone, and our work is on the visible joints only.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. Proper degreasing is what helps the new joint last.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Looking after it afterwards
Looking after new joints is easy:
- Move toiletries away from the joint
- Clean with a mild bathroom cleaner and a soft cloth
- Look for lifting corners and small gaps now and then
- Squeegee the walls and tray after use
In a kitchen, do not let water sit along the back of the worktop and keep hot pans away from the silicone. The drier the joint stays, the longer it lasts.
There’s no need to wait for a full refurbishment. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
Also near Broom Street
Other services in Broom Street
What we’re called out for in Broom Street
Not every tube in the shop is meant for a shower. Acrylic caulk and general-purpose sealants aren’t designed for a joint that’s wet every day, so they stain, crack or go mouldy before long. A bathroom joint needs anti-fungal sanitary silicone.
Most people get in touch when they notice something like this:
- Gaps where the bath or tray has moved
- Black spots spreading through the bead
- A messy, uneven bead from a previous reseal
- Failed sealant on the screen profile
Managing a site like Graveney Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before you book anyone
- What preparation is included
- Whether they’re fully insured
- Is VAT in the price?
- How hidden problems are handled
Broom Street: your questions answered
Do you cover Broom Street for bathroom resealing?
Yes, Broom Street is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and let us know what needs doing, and we will give you a clear price.
I let a flat near Faversham station. Can you help?
Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Do you reseal kitchen worktops and sinks too?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
What does bathroom resealing cost?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
How we quote for bathroom resealing
Your quote is based on your job. We take into account:
- The number of rooms or windows
- The old material and how stubborn it is
- The type of sealant required
- When we can work, for business premises
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
What to tell us when you ask for a quote:
- If someone has resealed it before
- How we’d reach the joints
- Whether it’s a home or a business
- Where the property is
Asking for a quote is easy: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we will take it from there.
How it works
There is not much for you to do on the day. Show us the job and we will take it from there. The job generally takes half a day or less for one room, longer when the kitchen is included, including the tidy-up. Somewhere like Broom Street needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Keep pets and children clear of the area while we work
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
Get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.