Greater London · England
Bathroom & kitchen resealing in Brompton, Greater London
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Brompton and across Greater London. Fully insured, ARBOMaster approved and guaranteed for a year.
- Sealant that has split, shrunk or peeled away
- Damp behind the bath or under the tray
- Shrunken sealant along the back of a worktop
Looking after it afterwards
How long the joints last depends on use and care. Here’s what we suggest:
- Dry worktop joints after washing up
- Keep the fan on for a while after bathing
- Squeegee the walls and tray after use
- Use gentle cleaners on the silicone
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
About our bathroom resealing in Brompton
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. We are often asked to deal with leaks into the floor or ceiling below and a messy, uneven bead from a previous reseal, on shower trays & enclosures, sinks & splashbacks and wet rooms.
Across London, a large share of homes are flats, conversions or mansion blocks, and many bathrooms sit right above someone else’s ceiling. In Brompton, that is a good reason to put tired sealant and grout right early.
Each job carries a 12-month guarantee.
- Place
- Brompton (SW3, SW7, SW1X)
- Region
- Greater London
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Brompton questions
Could a tired shower seal in my Brompton flat affect the neighbours below?
Yes, and the first sign is often a stain on the ceiling below. Cutting out the old sealant and laying a new bead early stops it getting that far.
I let a flat near London Victoria station. Can you help?
Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
How long does it take to reseal a bath or shower?
It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Can I choose the colour of the sealant?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Do you work in Brompton?
We do. Brompton is part of the area we cover.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or follow the cure time we give you.
When to call us in Brompton
Older sealant shrinks and hardens. In kitchens it often shrinks away from the back edge, opening a hairline gap that lets water and crumbs in. Hot pans and harsh cleaners do not help.
It’s worth asking for a quote if you see:
- Water escaping at the shower enclosure
- Splits where the tray meets the wall
- Mouldy sealant that has gone black
- Gaps between the worktop and the wall
For an older house near a landmark such as Church of St Simon Zelotes, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
What to look for in a quote
- How much experience the applicator has
- Whether they’re fully insured
- How the colour is chosen
- Whether the sealant suits the joint
What sealant work cannot fix
Before you book, it’s worth knowing the limits:
- Water coming from the plumbing rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- Cracks in the tray itself rather than the joint
If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Joints and surfaces we work on
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Basins & vanity units
- Shower trays & enclosures
How we quote for bathroom resealing
For a quick quote, just ask. The main things that affect it are:
- Whether there’s mould to deal with
- Access and height
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or email us and we will give you an honest view and a quote.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- The type of property
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
- Photos by email, if that’s easy
Need a quote? Please ring 0345 464 0079 or email us with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Nearby places to Brompton
More services for Brompton
What the job involves on each surface
Wet rooms
Wet room floors move slightly as they’re used, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Basins & vanity units
On a basin, neatness shows: so we keep the line tidy and even, in white, clear or a colour to suit.
How it works
The work is kept neat and contained to the joints we’re treating. Expect the work to take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Many London jobs are in flats, so we come ready for stairs, narrow hallways and shared entrances. Mention any building rules, key holders or managing agents when you book.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Getting ready for the visit
- Tell us if parking is tricky
- Mention any leaks or damp you’ve noticed
- Clear items away from the joints we’re working on
Get a quote
Every job is quoted individually. Just call 0345 464 0079 or send us an email with the details and send pictures if you have them.
Advice
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Bathroom resealing in Brompton: local notes
London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early. There are hotels and other places to stay in and around Brompton. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Letting a property close to London Victoria station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. As a London address, Brompton can be tricky for parking: let us know about parking bays, permits or a driveway.
Brompton is about 1 mile south of City of Westminster, in Greater London. From the centre of Brompton to the outskirts, bathroom resealing is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 764 towns and villages across Greater London, from the larger towns to small villages.
Every address in SW3, SW7 and SW1X is covered for bathroom resealing. Whether your property is on West Road, Hans Road and Eaton Lane or a nearby road, we can help. Being close to the A315 and A3212, Brompton is simple for us to get to for bathroom resealing. Other places close to Brompton include Chelsea (1 mile south), Belgravia (1 mile north-east), South Kensington (1 mile south-west), Victoria (1 mile east) and Little Chelsea (1 mile south-west). Further out, we also cover London (3 miles east), St Pancras (3 miles north-east), Shoreditch (4 miles north-east), Walthamstow (9 miles north-east), Hoxton (4 miles north-east) and Whitechapel (4 miles east).
What’s near Brompton
Typical jobs here are in homes near St Thomas More RC Language College, St Joseph's Catholic Primary School and Natural History Museum Library and Archives and the streets around them. You will also find Shuckburgh Arms (less than half a mile south-west) and Burton’s Court (0.5 miles south). The nearest railway station is London Victoria station, roughly 0.8 miles east of the centre. A little further out are Baynard's Castle (3 miles east) and Berkshire & Westminster Dragoons Museum (within half a mile south-east). For a walk, there’s Greville Place nature reserve and Serpentine.