Hampshire · England
Bathroom & kitchen resealing in Bagnum, Hampshire
Baths, showers and worktops in Bagnum need attention? We cut out the old, prepare the joints and apply the right sealant.
- Smears of silicone across the tiles
- Gaps between the worktop and the wall
- A reseal done over the top of the old bead
About our bathroom resealing in Bagnum
It is not only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water behind a laminate worktop can make it swell. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. Common call-outs are for failed sealant on the screen profile and mouldy sealant that has gone black, across sinks & splashbacks, kitchen worktops & upstands and shower trays & enclosures.
For a small place like Bagnum, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
There’s a 12-month guarantee on every job.
- Where
- Bagnum (BH24)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
So the new joints stay in good condition:
- Keep bottles off the sealant line
- Squeegee the walls and tray after use
- Avoid abrasive pads on the sealant
- Dry worktop joints after washing up
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- Cracks in the tray itself rather than the joint
- Loose or hollow tiles, or failed tanking behind them
- Failed grout lines across the wall
If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer before booking.
Joints and surfaces we work on
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks
Bathrooms and kitchens in Bagnum
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Bagnum, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Bagnum is about 2 miles south-east of Ringwood, in Hampshire. Bagnum gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across Hampshire, we cover 683 places, and Bagnum is one of them. Southampton is on our list too, around 17 miles away.
Postcode districts we cover here for bathroom resealing: BH24. We also cover the places around Bagnum: Crow (1 mile north), Upper Kingston (1 mile north-west), Hightown (1 mile north), Foulford (2 miles north) and Ringwood (2 miles north-west). Further out, we also cover Totton (13 miles north-east), Lymington (10 miles south-east), New Milton (6 miles south-east), Barton on Sea (7 miles south-east), Dibden Purlieu (15 miles east) and Marchwood (14 miles east).
Landmarks near Bagnum
Other landmarks nearby include St Leonard's Hospital (4.4 miles west). Green spaces nearby include St Catherine's Hill and Linbrook Lake.
Why deal with it now?
Leaving a split or mouldy bead only stores up trouble. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that’s a far bigger job than a reseal. Older cottages and farmhouses around Bagnum can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first.
Why book with us
- Trusted Arbo and Everbuild sealants
- Sanitary silicone with an anti-fungal additive in wet areas
- 180+ five-star Google reviews
- White, clear, grey or coloured to suit, where the product allows
Read what affects the cost and customer reviews.
Also near Bagnum
Also in Bagnum
Surface by surface
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A sound joint along the back edge stops that.
Bagnum: your questions answered
Do you cover smaller places like Bagnum?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What guarantee comes with bathroom resealing in Bagnum?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
How long before the new sealant can get wet?
We give you the cure time before we leave, and it’s usually around 24 hours. Using it sooner can damage the bead.
How long will the resealing take?
Allow a morning or an afternoon for most single baths and showers. We’ll confirm how long your job needs when we quote.
Is it OK to put new sealant on top of the old bead?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. All the old sealant comes out first.
Do you reseal kitchen worktops and sinks too?
Yes. Kitchen joints get extra degreasing before the new bead goes on, then a colour-matched bead is laid.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can you get rid of the black mould in my sealant?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
What happens on the day
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes two to three hours for a typical bath, depending on how much old sealant there is from start to finish. In a small place like Bagnum, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- Mention any tricky access
- Let us know about parking restrictions
- On commercial sites, let us know about site rules
Ask for a quote
For bathroom resealing in Bagnum, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Read more
What we are called out for in Bagnum
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone can’t grip the old bead underneath, so it peels, leaks and hides mould behind it.
The most common problems we see are:
- A reseal done over the top of the old bead
- Black spots spreading through the bead
- Smears of silicone across the tiles
- Water escaping at the shower enclosure
Schools such as Ringwood School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Before booking anyone
- How the joint is cleaned and prepared
- What the quote includes, VAT included or not
- Who turns up on the day
- Which sealant they’ll use, and why
Work for landlords, hotels and businesses
If you manage several properties in or around Bagnum, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.