South Lanarkshire · Scotland
Bathroom & kitchen resealing in Auldhouse, South Lanarkshire
Baths, showers and worktops in Auldhouse need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Damp behind the bath or under the tray
- A messy, uneven bead from a previous reseal
- Leaking joints on a shower screen
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Bathroom resealing in Auldhouse, done properly
Before a bath is sealed, it’s filled with water. A full bath sits slightly lower than an empty one, so the new joint isn’t pulled apart the first time it’s used. It’s a small step that rushed reseals tend to skip. We’re often asked to deal with water escaping at the shower enclosure and black mould in the silicone that won’t clean off, across shower trays & enclosures, sinks & splashbacks and baths.
Being further from a city doesn’t change the work: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Where
- Auldhouse (G75)
- Wider area
- South Lanarkshire
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026

The process
We keep the work tidy and contained to the joints we are treating. The job usually takes two to three hours for a typical bath, depending on how much old sealant there is. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Keep pets and children clear of the area while we work
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.
Read more
Landlords, agents and businesses in Auldhouse
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Aftercare tips
So the new joints stay in good condition:
- Keep an eye on the corners, where splits start
- Dry worktop joints after washing up
- Wait for the cure time we give you
- Stick to a soft cloth and a mild cleaner
In a kitchen, do not let water sit along the back of the worktop and keep hot pans away from the silicone. A dry joint lasts longer.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out. Replacing the sealant early keeps the job small.
Auldhouse homes and their sealant
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Rented homes near East Kilbride station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Auldhouse is about 2 miles south-east of Newlandsmuir, in South Lanarkshire. If you need bathroom resealing in Auldhouse, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We cover South Lanarkshire from our Crawley base. Auldhouse is one of 139 places in South Lanarkshire where we work for bathroom resealing. Glasgow is on our list too, about 9 miles from Auldhouse.
All of G75 is covered for bathroom resealing, from the main roads to the quietest streets. That includes homes and businesses on Auldhouse Road, Langlands Road and Cleughearn Road and the roads around them. Nearby, we also carry out bathroom resealing in Whitehills (1 mile north), Greenhills (2 miles north), Crutherland (2 miles north-east), The Murray (2 miles north) and East Kilbride (2 miles north). Within a short drive, we also cover Hamilton (6 miles north-east), Cambuslang (7 miles north), Uddingston (8 miles north-east), Blantyre (6 miles north-east), Larkhall (9 miles east) and Carluke (14 miles east).
Near you in Auldhouse
The nearest railway station is East Kilbride station, roughly 2.8 miles north. Other landmarks nearby include Polnoon Castle (2.5 miles west) and Hairmyres Hospital (2.6 miles north-west). The countryside around Auldhouse includes Corse Hill.
Nearby places to Auldhouse
What else we do in Auldhouse
When it is not the sealant
To be straight with you, some problems need a different trade:
- Damage behind the tiles that needs a tiler
- Water getting in through the grout rather than the sealant
- A bath or tray that moves because it isn’t properly supported
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Where we work in Auldhouse
- Kitchen worktops & upstands
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
What affects the quote in Auldhouse
The quote reflects the job in front of us. We look at:
- The product the joint needs
- How many rooms, windows or areas are involved
- Any mould that needs treating
- Any working-time requirements on site
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- How many joints, rooms or windows are involved
- The type of property
- Where the job is, and your postcode
- Any access issues, like height or stairs
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will talk you through the work and give you a clear price.
What we’re called out for in Auldhouse
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
Keep an eye out for these signs:
- Sealant that has split, shrunk or peeled away
- Gaps between the worktop and the wall
- Two layers of silicone, both failing
- Failed sealant on the screen profile
If you look after a building such as Duncanrig Secondary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before you book
- The length of the guarantee
- Whether VAT is included
- What preparation is included
- Who does the work, and how experienced they are
FAQs for Auldhouse
Do you cover smaller places like Auldhouse?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Auldhouse for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Auldhouse is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.
Can you get rid of the black mould in my sealant?
Yes, by replacing the sealant. Sprays can fade the marks, but cutting it out and resealing is what lasts. Good ventilation helps keep it away.
Can you do several jobs on one visit?
Yes. Just list everything you need.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you take out the old sealant first?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
How do I get a quote for bathroom resealing in Auldhouse?
Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk with a short description of the job.
Can new silicone go straight over the old?
No. New silicone won’t bond to old silicone, so it peels away and hides mould and water. All the old sealant comes out first.
