Isle of Wight · England
Bathroom & kitchen resealing in Apse Heath, Isle of Wight
Professional bathroom resealing in and around Apse Heath, with every bit of old sealant taken out first and a 12-month guarantee.
- A reseal done over the top of the old bead
- Sealant that has split, shrunk or peeled away
- Failed sealant on the screen profile
For landlords and businesses
For anyone letting property in or around Apse Heath, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote.
About our bathroom resealing in Apse Heath
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. If you’re dealing with mouldy sealant that has gone black and new sealant laid over old sealant that is now lifting, we can put it right, whatever the surface.
Somewhere as small as Apse Heath, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Our work is backed for twelve months.
- Location
- Apse Heath (PO36)
- Region
- Isle of Wight
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Apse Heath homes and their sealant
Apse Heath is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. There are hotels and other places to stay in and around Apse Heath. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
If you let a flat or house near Shanklin station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Apse Heath is about 6 miles south-east of Newport, in the Isle of Wight. Jobs in Apse Heath get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 125 places across the Isle of Wight. Portsmouth is on our list too, about 13 miles from Apse Heath.
All of PO36 is covered for bathroom resealing. Whether your property is on Ventnor Road, The Brambles and Newport Road or a nearby road, our applicators can take on the job. We also cover the places around Apse Heath: Princelett (1 mile south-west), Branstone (1 mile north-west), Winford (1 mile north), Hale Common (1 mile north-west) and Whiteley Bank (1 mile south-west). Further out, we also cover Newport (6 miles north-west), Ryde (6 miles north), Cowes (9 miles north-west), Ventnor (3 miles south), East Cowes (8 miles north-west) and Oakfield (6 miles north). Island and remote addresses take a little more planning, so please mention your location when you call 0345 464 0079 or email us.
Near you in Apse Heath
Apse Heath’s nearest station is Shanklin station, roughly 1.3 miles south-east. Well-known places in the area include Wight Aviation Museum (1 mile north-east) and Sandown Castle (2.6 miles east). Not far away are Stenbury Down and Alverstone Mead.
Also near Apse Heath
What else we do in Apse Heath
Your questions about bathroom resealing in Apse Heath
Is Apse Heath within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you take on hotel work around Apse Heath?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Are you fully insured?
Yes. We are fully insured for every job we do.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
How much does bathroom resealing cost in Apse Heath?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You will get a clear quote before work begins.
Do you reseal kitchen worktops and sinks too?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
Leave it or put it right?
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. Older cottages and farmhouses around Apse Heath can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and give you a clear price before any work starts.
Why us?
- Tidy, careful work
- A sealant colour to suit the surroundings
- You choose the colour before work begins
- Over 20 years’ experience
Read what affects the cost and customer reviews.
Do you need bathroom resealing in Apse Heath?
Black mould is behind a lot of resealing. Bathrooms without good ventilation keep the silicone damp for hours, and once it has grown into the bead, cleaning rarely gets it out.
The problems people usually mention when they call include:
- A bead that has pulled away from the tiles
- Water getting behind the bath panel
- Gaps where the bath or tray has moved
- Failed sealant on the screen profile
Schools such as Sandown Bay Academy are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- How hidden problems are handled
- Whether they seal over old material or remove it
- How the colour is chosen
- Is VAT in the price?
Surface by surface
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, in white, clear or a colour to suit.
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Cracked or missing grout between tiles (that’s regrouting)
- A cracked shower tray or bath (that needs repair or replacement)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
Where we work in Apse Heath
- Basins & vanity units
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Sinks & splashbacks
- Shower trays & enclosures
The process
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere as small as Apse Heath, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We tidy up and give you the cure time, generally around 24 hours.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
Ask for a quote
If you are in Apse Heath and need bathroom resealing, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Related advice
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Keep the fan on for a while after bathing
- Do not let bottles sit on the bead
- Give the silicone its full cure time
- Keep an eye on the corners, where splits start
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.