Hampshire · England
Bathroom Resealing in Andover Down
Problem with your baths, showers and worktops in Andover Down? We cut out the old, prepare the joints and apply the right sealant.
- Splits where the tray meets the wall
- New sealant laid over old sealant that is now lifting
- Water getting behind the bath panel
What the job involves on each surface
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. It’s resealed in white, clear or a colour to suit.
Wet rooms
In a wet room, the joints between floor and walls take standing water. They’re resealed with anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Bathroom resealing for homes and businesses in Andover Down
Resealing is a small job that makes a big difference. Black, patchy sealant makes clean tiles look tired, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We work on basins & vanity units, shower trays & enclosures and wet rooms, and people most often call us about shrunken sealant along the back of a worktop and two layers of silicone, both failing.
Homes around Andover Down are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
We stand behind the work with a one-year guarantee.
- Location
- Andover Down (SP11)
- Region
- Hampshire
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Quotes for bathroom resealing in Andover Down
Call for a quick quote. What matters most is:
- The amount of work
- How much old sealant there is and how hard it is to remove
- Whether there’s mould to deal with
- How easy the joints are to reach
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Asking for a quote
To help us quote quickly, please include:
- Any previous sealing or DIY work
- Any access issues, like height or stairs
- Where the job is, and your postcode
- Whether it’s a home or a business
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved and send you a clear quote.
Places near Andover Down
Also in Andover Down
Andover Down homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Managing a site like Pilgrims' Cross CofE Aided Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Andover Down is about 2 miles east of Andover, in Hampshire. From the centre of Andover Down to the outskirts, bathroom resealing is available for homes and businesses alike. Across Hampshire, we cover 683 places, and Andover Down is one of them. Our Southampton page covers work nearby (20 miles or so).
Work in SP11 is quoted and booked the same way as anywhere else. You’ll find streets such as London Road and The Middleway. Other places close to Andover Down include Picket Piece (1 mile north), Finkley Down (1 mile north-west), Picket Twenty (1 mile south-west), Finkley (1 mile north-west) and East Anton (2 miles north-west). Larger places within reach include Basingstoke (15 miles east), Winchester (12 miles south-east), Romsey (15 miles south), Hyde (11 miles south-east), Tidworth (10 miles west) and Weeke (11 miles south-east).
What’s near Andover Down
We work in homes and buildings around Winton Community Academy and Winton Community Academy, among other places. For rail, the closest station is Andover station, roughly 2.6 miles west of the centre. Other landmarks nearby include Andover War Memorial Hospital (2.6 miles west) and Finkley Down Farm Museum (1 mile north-west). The countryside around Andover Down includes Mill Lake and Anton Lakes.
Andover Down: your questions answered
Is Andover Down within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Andover station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
How do I get a quote for bathroom resealing in Andover Down?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before work begins.
How long will the resealing take?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
My sealant has gone black. Can you sort it?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Leave it or put it right?
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. In a small place like Andover Down, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- White, clear, grey or another colour, product permitting
- We leave the area clean and tidy
- We agree the colour with you first
- Quality sealants from Arbo and Everbuild
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes two to three hours for a typical bath, depending on how much old sealant there is for a typical job. In a small place like Andover Down, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Clear the area around the work
- Let us know about stairs, lifts or work at height
- Tell us about any water getting in
Getting a quote
We do not publish a price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or email us.
Advice
What we are called out for in Andover Down
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Heat from the hob and strong sprays speed it along.
Any of these means the joints need attention:
- Sealant that has split, shrunk or peeled away
- A messy, uneven bead from a previous reseal
- Damp behind the bath or under the tray
- A reseal done over the top of the old bead
Letting a property close to Andover station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
What your quote should include
- How long to leave it before use
- Whether you can choose the colour
- Is the old sealant removed completely?
- Are they insured?
Aftercare tips
Looking after new joints is easy:
- Keep an eye on the corners, where splits start
- Use gentle cleaners on the silicone
- Never pick at the silicone with a blade
- Let new sealant cure fully before it gets wet
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, and a nicked bead lets mould in sooner.
Do not wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Water getting in through the grout rather than the sealant
- A tray that rocks until it’s re-bedded
- Loose or hollow tiles, or failed tanking behind them
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Surfaces we seal
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
- Wet rooms
- Baths
- Kitchen worktops & upstands