West Sussex · England
Window Mastic in Goring-by-Sea
Our applicators work in Goring-by-Sea on mastic around window and door frames, sills and patio doors. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Untidy mastic left by window fitters
- Whistling draughts around closed windows
- Cracked or shrunken mastic around the frame
Do you need window mastic in Goring-by-Sea?
Older frames were often sealed with products that set hard. Once it has hardened, the frame’s movement tears it from the wall, and a gap opens along one edge.
These are the problems we are asked about most:
- Gaps where the sill meets the wall
- Water coming in at the bottom corners of a door
- A bead that does not match the frame
- Untidy mastic left by window fitters
Managing a site like Goring-By-Sea CofE (Aided) Primary School? Then its window and door frames need their mastic kept sound, just like a home’s.
Comparing quotes
- How long the guarantee is
- Are they insured?
- Is the old sealant removed completely?
- When the joint can take water or movement
Window mastic in Goring-by-Sea, done properly
There are two joints on most windows. The external joint is the weather seal; the internal joint closes the gap to the plaster and stops draughts. Either or both can be done. We work on window sills, timber windows & doors and uPVC windows, and people most often call us about mastic that’s falling out in pieces and cold air getting in at the frame edge.
Homes around Goring-by-Sea range from older properties to newer houses, and their windows range just as widely. The right sealant depends on the frame and on what it sits in.
There’s a 12-month guarantee on every job, large or small.

- Place
- Goring-by-Sea (BN12, BN99, BN13)
- Region
- West Sussex
- Cover
- 12 months on all our work
- Price
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Your questions about window mastic in Goring-by-Sea
Will you come out to Goring-by-Sea?
Yes. Goring-by-Sea is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Goring-By-Sea station. Can you help?
Yes. We work for letting agents and landlords as well as householders, and several properties can be quoted together. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Can resealing stop a draught around my window?
Yes, if the air is getting in around the frame. If it’s through the window’s own seals or a hinge, that’s a different fix, and we’ll say so.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Do you have sealant for grey or black windows?
Usually, yes. Mention the frame colour when you ask for a quote and we’ll use the nearest match.
How much does window mastic cost in Goring-by-Sea?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Why it’s worth doing now in Goring-by-Sea
Getting a straight, even bead on an outside frame takes practice, especially on upper floors. We cut out properly, back deep gaps and tool every joint neatly, using a product chosen for the frame and wall. In an older home around Goring-by-Sea, damp from a failed joint can get into timber and plaster, and that’s a much bigger job than renewing the sealant.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why Goring-by-Sea clients choose us
- An ARBOMaster approved applicator
- Domestic, commercial and hotel work
- We leave the area clean and tidy
- Quality sealants from Arbo and Everbuild
See our cost guide or what customers say.
What window mastic looks like in Goring-by-Sea
Goring-by-Sea is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on the mastic around window and door frames, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For landlords with property near Goring-By-Sea station, renewing tired window mastic between tenants heads off draught and damp complaints. Homes close to St Mary's Church include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Goring-by-Sea is about 1 mile south-west of Worthing, in West Sussex. Anywhere in BN12, our applicators can take on window mastic. Goring-by-Sea is one of 371 places in West Sussex where we work for window mastic. You can also see our page for Brighton, about 13 miles away.
Work in BN12, BN99 and BN13 works the same way as everywhere else we cover. Local streets include Sea Lane, Jupp's Lane and Goring Road. We also cover the places around Goring-by-Sea: Ferring (1 mile west), Hangleton (1 mile west), Kingston Gorse (2 miles west), Durrington (2 miles north) and West Kingston (2 miles west). Within a short drive, we also cover Bognor Regis (12 miles west), Littlehampton (5 miles west), Shoreham-by-Sea (7 miles east), Lancing (5 miles east), Rustington (4 miles west) and Storrington (8 miles north).
Local landmarks in Goring-by-Sea
Typical jobs here are in homes near Durrington Minature Railway, Chatsmore Catholic High School and Worthing College, among other places. Goring-by-Sea’s nearest station is Goring-By-Sea station, roughly 0.5 miles north-west. Nearby you will also find Museum of Sussex Folklore (1.6 miles north-east) and The Acre (1.8 miles east). Green spaces nearby include Highdown Hill.
What affects the cost of window mastic
Some jobs are bigger than they look, and some smaller. The main factors:
- Whether the work is at height
- The size of the job
- Whether there’s mould to deal with
- Any working-time requirements on site
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- How many joints, rooms or windows are involved
- The problem you’ve noticed
- Where the property is
- If someone has resealed it before
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, call 0345 464 0079 or drop us an email.
When it isn’t the sealant
To be straight with you, there are a few things sealant won’t fix:
- Broken hinges, locks or handles
- Penetrating damp from a failed cavity tray or render
- Condensation trapped between the panes
If you’re not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Surfaces we seal
- Composite doors
- Patio & French doors
- Timber windows & doors
- uPVC windows
- Aluminium frames
- Window sills
Places near Goring-by-Sea
More services for Goring-by-Sea
What we do, step by step
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a handful of frames, longer for a whole house. In a smaller place like Goring-by-Sea, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- First, we confirm safe access to each frame.
- All the failed sealant is cut away, along with any loose debris.
- The surfaces are cleaned and left dry.
- Deep voids are backed, then the sealant is gunned in.
- The joint is shaped to shed water and the area tidied.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Clear items away from the joints we’re working on
- Let us know about stairs, lifts or work at height
Getting a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To get started, call 0345 464 0079 or email us.
Related advice
What the job involves on each surface
Window sills
Every drop off the glass ends up on the sill, so the joints at each end and underneath matter. Each is cleaned out and resealed.
Aluminium frames
Bi-fold and sliding aluminium doors have long frame joints, and the threshold joint takes a lot of water. Each is cleaned, backed where deep and resealed.
