Isle of Wight · England

Window & door mastic in Gatcombe, Isle of Wight

Mastic around window and door frames, sills and patio doors in Gatcombe, with a one-year guarantee on every job. Call for a quick quote.

  • Cracked or shrunken mastic around the frame
  • Sealant in the wrong colour for the frame
  • Rain getting in at the frame or under the sill

Window mastic in Gatcombe

What the job involves on each surface

Aluminium frames

Coated aluminium needs a compatible sealant, and acetoxy silicones aren’t used, as they can attack some metals. Neutral-cure sealant is the safe choice.

Window sills

The end joints of a sill tend to fail before the rest. We reseal them so rain cannot run into the wall.

Window mastic in Gatcombe

Around Gatcombe we seal all kinds of frames: uPVC, aluminium, timber and composite, plus patio doors, French doors and sills. Each gets a sealant chosen for the frame and the wall it meets. If you have sealant in the wrong colour for the frame and whistling draughts around closed windows, we can put it right.

Around Gatcombe, many homes face open ground, so their windows and doors take the full weather. That exposure dries out and cracks the mastic around frames and sills faster.

Big or small, it’s backed by our one-year guarantee in Gatcombe and across the Isle of Wight.

Where
Gatcombe (PO30)
Wider area
Isle of Wight
Guarantee
12 months on all our work
Price
A clear quote up front
Phone
0345 464 0079
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

What we do, step by step

Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes most of a day for a typical house, less for a few frames. Somewhere like Gatcombe needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. Each frame is looked over and we agree which ones need resealing.
  2. We remove the old mastic and clean the frame edge and wall.
  3. Deep gaps get closed-cell backing rod to set the depth.
  4. A flexible exterior sealant is applied in a colour to suit the frame.
  5. We tool each bead neatly and check every joint is closed.

Preparing for the visit

  • Mention any sign-in or site rules at work premises
  • Plan for the work area to be out of bounds to pets and children
  • Try not to wet indoor joints just before the visit

How to get a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.

Ask for a quote

Related advice

What sealant work can’t fix

New sealant can’t fix everything, and we will tell you before we start. It will not solve:

  • Damp coming through the wall itself rather than the frame joint
  • Draughts through the window seals rather than the frame
  • Soft or decayed wood in the frame

If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think before booking.

What we seal

  • Patio & French doors
  • Timber windows & doors
  • Composite doors
  • Aluminium frames
  • Window sills
  • uPVC windows

Aftercare tips

Good habits help new joints last longer. Our tips:

  • Avoid blasting the frames with a pressure washer
  • Clean frames with a soft cloth and soapy water
  • Wipe condensation off the frames
  • Make sure the drainage slots are not blocked

On timber frames, keep the paintwork in good order, because bare, wet timber moves more and pulls at the joint. Paint up to the joint, not over the silicone.

A small gap around a frame only grows. As old mastic keeps shrinking, the gap widens, and a cold room gets colder. Resealing closes it.

Common questions in Gatcombe

Can you do window mastic in Gatcombe?

Yes, Gatcombe is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and let us know what needs doing.

Is Gatcombe within the area you cover?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you do upstairs windows?

Generally, yes. We plan safe access before the job.

Do you work for letting agents?

Yes. As well as householders, we work for landlords, agents, businesses and hotels.

When is the sealant fully cured?

Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used.

How long will my window job take?

A few frames take a few hours, while a whole house takes longer. We confirm the timing with your quote.

Do you guarantee window mastic?

Yes. Every job comes with our 12-month guarantee, and we’re ARBOMaster approved applicators.

Should I try DIY first?

It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.

Landlords, agents and businesses in Gatcombe

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

Signs you need window mastic in Gatcombe

Joint shape matters as much as the product. A thin smear across a wide gap has nothing to it, and a gap filled solid can’t flex. Backing rod sets the right depth.

These are the problems we are asked about most:

  • Cracked sealant at the sill ends
  • White mastic on grey or black frames
  • Rain getting in at the frame or under the sill
  • Gaps left after new windows were fitted

If you live in an older home near St. Olave's Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame.

What to look for in a quote

  • Whether the sealant suits the joint
  • Whether VAT is included
  • What the cure time is
  • Is the old sealant removed completely?

Choosing a sealant specialist

What window mastic looks like in Gatcombe

Historic houses like Gatcombe House (about 0.2 miles south-east) are a reminder that the area around Gatcombe has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

Schools such as Chillerton and Rookley Primary School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s.

Gatcombe is about 2 miles south of Newport, in the Isle of Wight. Anywhere in PO30, we can carry out window mastic at your property. We cover 125 towns and villages across the Isle of Wight, from the larger towns to small villages. You can also see our page for Portsmouth, roughly 14 miles from Gatcombe.

Every address in PO30 is covered for window mastic, from the main roads to the quietest streets. Whether your property is on Gatcombe Road, Rectory Lane and Newbarn Lane or a nearby road, we can help. We also cover Chillerton (1 mile south), Plaish (2 miles north-west), Clatterford (2 miles north), Bowcombe (2 miles north-west) and Carisbrooke (2 miles north). Within a short drive, we also cover Ryde (8 miles north-east), Cowes (6 miles north), Sandown (6 miles east), Shanklin (6 miles east), Ventnor (6 miles south-east) and East Cowes (6 miles north). Remote and island addresses need a little more planning, so please mention your location when you phone 0345 464 0079 or email us.

Landmarks near Gatcombe

We work in homes and buildings around Christ The King College and the streets around them. Other landmarks nearby include Carisbrooke Castle (1.6 miles north) and Isle of Wight Music Museum (2.5 miles north). The countryside around Gatcombe includes Briddlesford Nature Reserve and Brighstone Down.

Map of Gatcombe © OpenStreetMap contributors

DIY sealant or a professional job?

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job