Isle of Wight · England
Remedial sealant & repairs in Yarbridge, Isle of Wight
Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Yarbridge. Fully insured, ARBOMaster approved and guaranteed for a year.
- Dark patches showing through the sealant
- Sealant that came away because the surface wasn’t prepared
- Torn expansion joints
Do you need remedial sealant in Yarbridge?
Joints that move need sealant that can stretch. Flexing baths, rocking trays and building movement joints will split a rigid or thin bead.
Any of these means the joints need attention:
- Leaks that keep coming back after resealing
- Sealant peeling off a dusty or damp surface
- Floor or wall movement joints that have failed
- Caulk or the wrong sealant used in a wet area
For an older house near a landmark such as St. Mary's Church, walls and floors in older homes can move, and sealant and grout show it first.
What to look for in a quote
- What the cure time is
- What insurance they hold
- What product goes in the joint
- How long the guarantee is
Remedial sealant for homes and businesses in Yarbridge
Two decades of sealant work means we recognise most failures quickly. We are ARBOMaster approved and fully insured, and remedial work carries our 12-month guarantee. We are often asked to deal with over-sealed joints coming away and kitchen joints letting water behind the worktop, on mouldy bath & shower sealant, failed movement joints and leaking tray & enclosure joints.
Homes around Yarbridge are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Yarbridge (PO36)
- Region
- Isle of Wight
- Cover
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Other services in Yarbridge
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Never seal over old silicone
- Do not point over movement joints
- Run the fan after every shower
- Have loose fittings fixed before resealing
Where we’ve pointed out another fault, have it put right, because the new sealant cannot hold back a problem underneath.
Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
How we quote for remedial sealant
You will get a clear quote before we start. It’s based on:
- The type of sealant required
- Any mould that needs treating
- The number and length of the joints
- The old material and how stubborn it is
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.
Helping us quote
You do not need to know the technical terms. It helps if you can tell us:
- Roughly how big the job is
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand.
For landlords and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
The process
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours, depending on how many layers have to come out for a typical job. Somewhere as small as Yarbridge, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Let us know about earlier repairs to the joints
- Mention any tricky access
- Try not to wet indoor joints just before the visit
How to get a quote
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Related advice
Questions from Yarbridge
Do you work in hotels near Yarbridge?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Will you come out to Yarbridge?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can I choose the sealant colour?
Most of the time, yes. We’ll explain which colours are available.
How long does remedial resealing take?
A little longer than a standard reseal. Most jobs take a few hours, and we confirm the time with your quote.
Someone sealed over the old bead. Can you fix it?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
My shower still leaks after a reseal. Can you sort it?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Can failed expansion joints be resealed?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, then the joint is sealed properly.
Can you do several jobs on one visit?
Yes. More than one area can be quoted together.
Why act early in Yarbridge
DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. Older cottages and farmhouses around Yarbridge can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
Why Yarbridge customers choose us
- Arbo and Everbuild products
- 180+ five-star Google reviews
- More than 20 years in sealant work
- Homes, businesses and hotels
When something else is needed
It helps to know what we cannot do too:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Failed tanking or loose tiles behind the sealant
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Failed movement joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
What remedial sealant looks like in Yarbridge
Yarbridge is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Yarbridge has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For site and facilities teams at buildings such as Brading Church of England Controlled Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Brading station, botched sealant from a previous quick fix is easier to strip out between tenants.
Yarbridge is about 2 miles north-east of Sandown, in the Isle of Wight. Anywhere in PO36, our applicators can take on remedial sealant. Our the Isle of Wight coverage runs to 125 places, Yarbridge among them. For nearby work, see our Portsmouth page, about 10 miles away.
We cover every part of the PO36 postcode area for remedial sealant and the streets around it. You’ll find streets such as New Road, Morton Road and Church Lane. Being close to the A3055, Yarbridge is simple for us to get to for remedial sealant. We also cover Morton (1 mile south-west), Brading (1 mile north), Adgestone (1 mile west), Yaverland (1 mile south-east) and Sandown (2 miles south-west). Larger places within reach include Newport (7 miles west), Ryde (4 miles north), Cowes (9 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). If you’re somewhere remote, a little more planning is needed.
Near you in Yarbridge
Locally, jobs take us to homes and businesses close to Sandown Bay Academy, The Bugle Inn and The Bay Church of England School. The nearest railway station is Brading station, about 0.5 miles north-east of the centre. Well-known places in the area include Arthur Webster Memorial Hospital for Children (3.1 miles south-west) and Sandown Castle (1.2 miles south). For a walk, there’s Brading Marshes RSPB reserve and Brading Down.