Kent · England
Remedial sealant & repairs in Wye, Kent
Removing failed, mouldy or leaking sealant and putting it right in Wye, with a one-year guarantee on every job. Call for a quick quote.
- Wide, uneven beads that look worse than the old ones
- Dark patches showing through the sealant
- Decorators’ caulk around a bath or shower
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Remedial sealant in Wye
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We’re ARBOMaster approved and fully insured, and every remedial job comes with a 12-month guarantee. We work on failed movement joints, expansion joints and leaking tray & enclosure joints, and the jobs we see most are torn expansion joints and products that weren’t meant for the joint.
Being in a small place like Wye makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Every job is covered by our one-year guarantee.
- Location
- Wye (TN25)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Do you need remedial sealant in Wye?
Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould, faster where ventilation is poor. Then the only fix is removal and a new bead.
Any of these means the joints need attention:
- Worktop sealant that has shrunk and split
- Caulk or the wrong sealant used in a wet area
- Mould trapped under a layer of silicone
- Wide, uneven beads that look worse than the old ones
For landlords with property near Wye station, botched sealant from a previous quick fix is easier to strip out between tenants.
Before booking anyone
- How the colour is chosen
- Who does the work, and how experienced they are
- What happens if they find a problem under the old sealant
- Whether all the old sealant comes out first
What we cannot put right
We won’t take on work that won’t last, so these are the limits:
- Older mastics that may need an asbestos check before removal
- Water damage behind tiles that needs a tiler
- Cracks in the fitting rather than the joint
If in doubt, call 0345 464 0079 or email us and we’ll say what we think.
Where we work in Wye
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
- Leaking tray & enclosure joints
- Failed movement joints
- Mouldy bath & shower sealant
What remedial sealant looks like in Wye
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Managing a site like Lady Joanna Thornhill Endowed Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. In the older streets around Church of Saint Gregory and Saint Martin, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Wye is about 4 miles north-east of Ashford, in Kent. Whether you’re in the middle of Wye or further out, we cover remedial sealant for every kind of property. 922 places in Kent are on our list. We also work in Chelmsford, about 43 miles from Wye.
Here we cover the TN25 postcode area for remedial sealant. We cover properties on High Street, Church Street and The Green. Other places close to Wye include Kempe's Corner (1 mile west), Boughton Corner (1 mile north-west), Boughton Aluph (1 mile north-west), Brook (2 miles south-east) and Folly Town (2 miles south-east). We also work in nearby towns such as Ashford (4 miles south-west), Canterbury (9 miles north-east), Sittingbourne (14 miles north-west), Folkestone (12 miles south-east), Whitstable (12 miles north) and Faversham (9 miles north).
Near you in Wye
We work in homes and buildings around The New Flying Horse pub, Wye School and Wye School, among other places. Wye has its own railway station: Wye station. Other landmarks nearby include County Square (3.8 miles south-west) and William Harvey Hospital (3.1 miles south). Open spaces near Wye include Hatch Park.
Quotes for remedial sealant in Wye
We quote each job individually. This is what makes a difference:
- Working hours on commercial sites
- The product the joint needs
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- What’s wrong with the joints now
- The rough size of the job
- Any access issues, like height or stairs
- Where the property is
To get a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before work begins.
FAQs for Wye
Do you cover smaller places like Wye?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Wye station?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. You can call 0345 464 0079 or email us with the details for a clear quote.
Can you remove old sealant without damaging the bath?
Yes, with care. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. Any existing damage is pointed out before any work starts.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Can you fix a reseal that hasn’t worked?
Yes. We will take all the sealant out, look for why it failed and reseal it properly.
Can you remove sealant that is been put over old sealant?
Yes. We remove every layer; new silicone does not bond to old silicone, which is why over-sealing fails.
Can failed expansion joints be resealed?
Yes. Backing sets the depth and stops the sealant sticking to the back.
What if the leak is not the sealant?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.
Why it’s worth doing now in Wye
Remedial work takes longer than a straight reseal, but rarely a lot: the work takes a few hours, depending on how many layers have to come out. It’s far less disruption than resealing the same joint again and again. Around Wye, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
Why Wye clients choose us
- Colour agreed with you before work begins
- ARBOMaster approved applicator
- White, clear, grey or coloured to suit, where the product allows
- We never seal over old sealant
Read what affects the cost or customer reviews.
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for most joints, depending on how much old sealant has to come out and we leave things clean and tidy. Somewhere as small as Wye, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
How to prepare
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
Ask for a quote
We quote each job on its own. Simply ring 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
Read more
Looking after it afterwards
How long the joints last depends on use and care. Here’s what we suggest:
- Keep an eye on the ceiling below the bathroom
- Never fill a movement joint with mortar or grout
- Do not wait for a small gap to become a leak
- Get the cause of a repeat leak found before resealing
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.