Kent · England
Remedial sealant & repairs in Brook, Kent
Specialist remedial sealant for Brook: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Torn expansion joints
- Black mould underneath the bead
- Gaps opening along the back of the worktop
Remedial sealant in Brook
The wrong product in the wrong joint won’t last, however tidy it looks. Out it comes, and in goes a sealant suited to the job. If you have floor or wall movement joints that have failed and leaks that keep coming back after resealing, we can put it right, whatever the surface.
In a village or hamlet like Brook, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Place
- Brook (TN25)
- Region
- Kent
- Cover
- One year on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Why deal with it now?
Adding more sealant is the usual quick fix, and it rarely works. It can’t bond to what’s underneath, so the leak carries on and there’s now more to remove. Around Brook, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why choose Mr Mastic in Brook
- Sanitary silicone with an anti-fungal additive in wet areas
- More than 20 years in sealant work
- A choice of colours where the product allows
- Every job guaranteed for a year
Read our cost guide and customer reviews.
How it works
Before we leave, we go over the finished joints with you. The work normally takes a few hours, depending on how many layers have to come out, depending on how much there is to do. In a small place like Brook, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
How to get a quote
To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. We will give you a clear quote before any work starts.
Related advice
Towns and villages near Brook
What else we do in Brook
Landlords, agents and businesses in Brook
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
If you manage several properties in or around Brook, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Honest limits
A few problems are outside what sealant work can do:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- A bath, tray or worktop that moves until it’s properly fixed
- Cracks in the fitting rather than the joint
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before you book.
Where we work in Brook
- Mouldy bath & shower sealant
- Expansion joints
- Failed movement joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Keep the room well ventilated
- Keep bleach and abrasives off the bead
- Always have old sealant cut out, not covered
- Keep movement joints clear of mortar and paint
Keep an eye on the joint at first, particularly where the original failure was caused by movement. Should anything change, phone 0345 464 0079 or send us an email.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.
What affects the cost of remedial sealant
You will get a clear quote before work begins. It takes into account:
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
- Which sealant suits the joint
- Any mould that needs treating
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Asking for a quote
You don’t need to know the technical terms. Just tell us:
- Roughly how big the job is
- What’s wrong with the joints now
- Where the property is
- Photos by email, if that is easy
Need a quote? Please call 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and give you a clear price before work begins.
Remedial sealant in Brook: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Wye station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. If you live in an older home near Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Brook Community Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Brook is about 4 miles east of Ashford, in Kent. We provide remedial sealant to householders, landlords and businesses in Brook and the surrounding area, as part of our work across Kent. Brook is one of 922 places in Kent where we work. There’s also a page for Chelmsford, roughly 45 miles from Brook.
Here we cover the TN25 postcode area for remedial sealant. That includes homes and businesses on The Street, Troy Town Lane and Stonebridge and the roads around them. Neighbouring places we cover for remedial sealant include Folly Town (1 mile east), Wye (2 miles north-west), Hinxhill (2 miles south-west), Hastingleigh (2 miles east) and Hassell Street (2 miles north-east). We also work in nearby towns such as Ashford (4 miles west), Canterbury (10 miles north-east), Dover (15 miles east), Folkestone (11 miles south-east), Whitstable (14 miles north) and Faversham (11 miles north).
What’s near Brook
We work in homes and buildings around Wye School and the streets around them. For rail, the closest station is Wye station, roughly 2 miles north-west of the centre. Well-known places in the area include William Harvey Hospital (2.4 miles south-west) and County Square (3.9 miles west). Not far away are Hatch Park.
Questions from Brook
Will you come out to Brook?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I let a flat near Wye station. Can you help?
Yes, we work for landlords and agents. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Can I add another job to the visit?
Of course. Doing several areas at once is usually more efficient.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Do you fix expansion and movement joints?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, then the joint is sealed properly.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
How long should I leave it?
Cure times vary by product and the conditions. Before we leave, we will tell you the cure time.
How do I get a quote for remedial sealant in Brook?
It depends on the job, so we quote each one individually. For a quick quote, ring 0345 464 0079 or send us an email with a short description of the job.