Kent · England
Regrouting in Brook, Kent
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Brook, backed by a 12-month guarantee. Call for a quick quote.
- Grout that makes sound tiles look old
- Splashback grout that has darkened
- Gaps where the shower grout has gone
Regrouting in Brook: local notes
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Wye station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. If you look after a building such as Brook Community Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Brook is about 4 miles east of Ashford, in Kent. From the centre of Brook to the outskirts, we cover regrouting for every kind of property, from flats and houses to offices and hotels. Across Kent, we cover 922 places, Brook among them. We also work in Chelmsford, around 45 miles away.
Every address in TN25 is within our area for regrouting, from the main roads to the quietest streets. Regrouting is available to properties on The Street, Troy Town Lane and Stonebridge and the roads around them. We also cover the places around Brook: Folly Town (1 mile east), Wye (2 miles north-west), Hinxhill (2 miles south-west), Hastingleigh (2 miles east) and Hassell Street (2 miles north-east). We also work in nearby towns such as Ashford (4 miles west), Canterbury (10 miles north-east), Dover (15 miles east), Folkestone (11 miles south-east), Whitstable (14 miles north) and Faversham (11 miles north).
Local landmarks in Brook
Around Brook, our work takes us to homes and buildings near Wye School and the streets around them. Brook’s nearest station is Wye station, roughly 2 miles north-west. Nearby you will also find William Harvey Hospital (2.4 miles south-west) and County Square (3.9 miles west). Green spaces nearby include Hatch Park.
How we handle regrouting in Brook
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water can get in behind the tiles. Our job is to rake it out and put new grout in, then reseal the corners and edges. If you have grout stained black or orange that won’t clean and dirty, worn grout on a tiled floor, we can put it right, on wet rooms, kitchen splashbacks and bathroom wall tiles alike.
Somewhere as small as Brook, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
All of our work is guaranteed for twelve months, in Brook and everywhere else we cover.
- Location
- Brook (TN25)
- Region
- Kent
- Cover
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Different surfaces, different methods
Wet rooms
In a wet room, the whole floor gets wet, so sound grout really matters. We check the tiles first.
Corners and edges
Edges are resealed while we are there, so the whole area is finished together.
What happens on the day
You do not need to clear the whole room or building, only the area right around the joints. We protect the rest, and the job takes a few hours for a shower enclosure, longer for a whole room for a typical job. For a village or hamlet like Brook, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
How to prepare
- Clear the area around the work
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Read more
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
When to call us in Brook
Soap scum and limescale build up on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.
Most people get in touch when they notice one of these:
- Discoloured grout on otherwise sound tiles
- Kitchen splashback grout stained by grease
- Shower grout that has worn away
- Grout stained black or orange that will not clean
Homes close to Church of St Mary include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Questions to ask before booking
- What insurance they hold
- Is VAT in the price?
- How much experience the applicator has
- How the surfaces are prepared before sealing
Towns and villages near Brook
More services for Brook
What affects the quote in Brook
Your quote is based on your job. We take into account:
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- How many areas need sealing
- The size of the job
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or drop us an email and we will talk you through it.
Helping us quote
You don’t need to know the technical terms. It helps if you can tell us:
- What’s wrong with the joints now
- Any access issues, like height or stairs
- Pictures of the joints, sent by email
- The address or postcode of the job
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or email us.
When something else is needed
A few problems are outside what sealant work can do:
- A leaking wet room membrane
- Leaks from pipes, valves or wastes (a plumber’s job)
- Loose tiles, which need refixing first
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before booking.
Joints and surfaces we work on
- Bathroom floors
- Bathroom wall tiles
- Shower walls
- Tiled floors
- Wet rooms
- Kitchen splashbacks
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Open a window or run the fan to clear steam
- Clean grout with a mild bathroom cleaner
- Wipe water off the walls when you are done
- Keep harsh bleach and acid cleaners off the grout
Give the new grout the time we tell you before using the shower, so it can harden properly. From then on, a quick rinse after showering helps and keep the room ventilated.
Cracked grout doesn’t stay cracked for long. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.
FAQs for Brook
Is Brook within the area you cover?
Yes. Brook is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Wye station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
Should corners be grouted or sealed?
Internal corners and edges are sealed with flexible silicone. Grout in those joints cracks as the building moves.
What guarantee comes with the work?
Our one-year guarantee covers every job, including regrouting.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or email us.
How long does regrouting take?
Most jobs take anything from a few hours to a full day, depending on the area, including preparation and clearing up. We will confirm how long when we quote.
Do you regrout part of a bathroom, like the shower?
Yes. A lot of our jobs are only the shower, or just the joints that have failed.