Kent · England
Fire-rated sealant in Brook, Kent
Our applicators work in Brook on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Standard silicone or caulk in a fire-stopping gap
- Open gaps behind door architraves
- Old fire sealant that has split or come away
Leave it or put it right?
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up gives you evidence that the item was dealt with. Around Brook, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- Arbo and Everbuild products
- Every job guaranteed for a year
- Anti-fungal sanitary silicone in wet areas
- We’re fully insured
Take a look at our cost guide or customer reviews.
Fire rated sealant in Brook
We do not assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on linear gaps, plasterboard & masonry and flats & HMOs, and common reasons people get in touch are door frames with gaps between frame and wall and linear gaps at the head of walls.
For holiday lets, converted business premises or a community building near Brook, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, it’s backed by our one-year guarantee in Brook and across Kent.
- Place
- Brook (TN25)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
What sealant work can’t fix
We will always be straight with you, so here’s what new sealant will not do:
- Openings too large for sealant, which need batts, boards or another system
- Fire risk assessments, which need a qualified assessor
- Construction that does not provide fire resistance on its own
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Where we work in Brook
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Flats & HMOs
More services for Brook
FAQs for Brook
Can you help a landlord with a rental near Wye station?
Yes. We work for landlords and agents as well as householders, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Will you come out to Brook?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
How long will you be here?
That depends on how much there is to do, but as a guide it takes a few hours for a handful of gaps, and longer for a whole building. We will give you a better idea when we quote.
Will it make a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Can you quote for more than one area?
Yes, we can. Several rooms, windows or areas can go on one quote.
Do you take on fire stopping in schools and offices?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. We agree access and the order of work with you first.
Can you give us a record of the work?
Yes. We record the locations we’ve sealed and the products used to keep with your fire safety documents.
Can I choose the sealant colour?
Most of the time, yes. We will tell you which colours the right product comes in and agree one before we start.
What we’re called out for in Brook
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
People generally contact us when they notice one of these:
- Linear gaps at the head of walls
- Cracked or shrunken fire-rated sealant
- Sealant items on a fire risk assessment action list
- Seals cut through by electricians, plumbers or data installers
For site and facilities teams at buildings such as Brook Community Primary School, fire-stopping around service openings should be restored whenever new services go in.
Before booking anyone
- Who turns up on the day
- What guarantee comes with the work
- Whether VAT is included
- What happens if the job turns out different
Fire rated sealant in Brook: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Letting a property close to Wye station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as Church of St Mary, older buildings that have had new heating or wiring often have service gaps worth checking.
Brook is about 4 miles east of Ashford, in Kent. Homes, rented property, offices and hotels in Brook is covered for fire rated sealant. The work is guaranteed for a year. We cover 922 towns and villages across Kent. Our Chelmsford page covers work nearby (45 miles or so).
Jobs for fire rated sealant in TN25 works the same way as everywhere else we cover. Fire rated sealant is available to properties on The Street, Troy Town Lane and Stonebridge. We also cover the places around Brook: Folly Town (1 mile east), Wye (2 miles north-west), Hinxhill (2 miles south-west), Hastingleigh (2 miles east) and Hassell Street (2 miles north-east). Within a short drive, we also cover Ashford (4 miles west), Canterbury (10 miles north-east), Dover (15 miles east), Folkestone (11 miles south-east), Whitstable (14 miles north) and Faversham (11 miles north).
Landmarks near Brook
Typical jobs here are in homes near Wye School. The nearest railway station is Wye station, roughly 2 miles north-west. Nearby you will also find William Harvey Hospital (2.4 miles south-west) and County Square (3.9 miles west). Not far away are Hatch Park.
Surface by surface
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run leaving no stretch unsealed.
What happens on the day
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. In a small place like Brook, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
How to get a quote
Getting a quote is simple: let us know what needs doing and where. A few photos by email make the job easier to understand, and we’ll take it from there.
Read more
How we quote for fire rated sealant
Every job gets its own quote. This is what makes a difference:
- The product the joint needs
- The amount of work
- Access and height
- How many areas need sealing
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
What to tell us for a quote
Before you ask for a quote, have a think about:
- What’s wrong with the joints now
- If someone has resealed it before
- Roughly how big the job is
- The type of property
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before we start.