Orkney Islands · Scotland
Remedial Sealant in Tingwall
Specialist remedial sealant for Tingwall: careful preparation, the right product and tidy work. Ask us for a quick quote.
- A shower that leaks however often it’s resealed
- Mould trapped under a layer of silicone
- Thick, messy sealant smeared over tiles
Remedial sealant in Tingwall, done properly
The wrong product in the wrong joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. Common call-outs are for over-sealed joints coming away and movement joints that have split or pulled away, on leaking tray & enclosure joints, failed movement joints and mouldy bath & shower sealant.
A bathroom in a place like Tingwall gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Tingwall (KW17)
- Region
- Orkney Islands
- Guarantee
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When to call us in Tingwall
Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould, faster where ventilation is poor. Then the only fix is removal and a new bead.
Any of these means the joints need attention:
- Movement joints that have split or pulled away
- Caulk or the wrong sealant used in a wet area
- Kitchen joints letting water behind the worktop
- Sealant applied over old sealant that has lifted
In and around Tingwall, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Comparing quotes
- What the cure time is
- The length of the guarantee
- How the surfaces are prepared before sealing
- How the colour is chosen
When it isn’t the sealant
We will not take on work that won’t last, so here’s what sealant can’t put right:
- A tray or worktop that needs refixing first
- Failed tanking or loose tiles behind the sealant
- Plumbing leaks behind walls or under trays
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
What we seal
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
- Shrunken worktop sealant
Aftercare tips
Aftercare is simple:
- Ask why a joint failed before redoing it
- Keep the room well ventilated
- Check ceilings under showers for marks
- Clean sealant with mild products only
Do not let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Remedial sealant around Tingwall
Tingwall is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
For jobs in and around Tingwall, choosing the right material for each joint is as important as a tidy finish.
Tingwall is about 8 miles north-west of Kirkwall, in the Orkney Islands. Across the KW17 area, we can carry out remedial sealant at your property. We cover 51 towns and villages across the Orkney Islands.
We cover every part of KW17 for remedial sealant and the streets around it. Other places close to Tingwall include Gorseness (2 miles south-east), Isbister (3 miles south), Evie (3 miles north-west), Norseman (3 miles south-west) and Settiscarth (3 miles south-west). If you are somewhere remote, a little more planning is needed.
Near you in Tingwall
Well-known places in the area include Langskaill House (2.3 miles east). The countryside around Tingwall includes Loch of Brockan and Hammars Hill.
Tingwall: your questions answered
Do you cover Tingwall for remedial sealant?
Yes. We work across all of Scotland, and Tingwall is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Is there a guarantee on remedial sealant in Tingwall?
All our work, in Tingwall and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, so we find that first.
Can you quote for more than one area?
Of course. Doing several areas at once is normally more efficient.
Can you remove old sealant without damaging the bath?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we’re done.
How the job changes by surface
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning before resealing.
Over-sealed & botched joints
Every layer has to come out, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours for most joints, depending on how much old sealant has to come out. For a place like Tingwall, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- Mention any parking rules near the property
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Advice
More services for Tingwall
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.