West Sussex · England
Remedial Sealant in Streat
Remedial sealant for Streat and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Torn expansion joints
- Smears and lumps from a botched reseal
- Dark patches showing through the sealant
Remedial sealant in Streat, done properly
Removing failed sealant is the hardest part of the job. We cut out every layer, clear the residue and degrease the surfaces, taking care not to scratch the surfaces around it. New sealant only bonds to a clean, dry joint. Typical jobs include caulk or the wrong sealant used in a wet area and leaks that keep coming back after resealing, across leaking tray & enclosure joints, mouldy bath & shower sealant and botched or over-sealed joints.
Homes around Streat are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
You get a 12-month guarantee, the same in Streat as everywhere else we work.
- Location
- Streat (BN6, BN7)
- Wider area
- West Sussex
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
When it is not the sealant
A few problems are outside what sealant work can do:
- Water damage behind tiles that needs a tiler
- Cracks in the fitting rather than the joint
- Sealant in an older building that needs testing for asbestos first
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think before you book.
Joints and surfaces we work on
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Expansion joints
- Failed movement joints
- Shrunken worktop sealant
- Botched or over-sealed joints
What the job involves on each surface
Over-sealed & botched joints
Every layer has to come out, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Places near Streat
What else we do in Streat
What happens if it’s left?
A failed seal rarely means a new bathroom. If the bath, tray and tiles are sound, remedial resealing normally puts it right. If they’re not, we’ll tell you. Around Streat, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first.
What you get with us
- Rated 4.9 stars on Google
- A sealant colour to suit the surroundings
- Full insurance on every job
- Domestic, commercial and hotel work
See what affects the cost and customer reviews.
FAQs for Streat
Is Streat within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do remedial sealant in Streat?
Yes. Our work covers London and the South East, and Streat is part of that. Just phone 0345 464 0079 or email us with a few details of the job.
Can you remove old sealant without damaging the bath?
Yes. Residue is removed with a product suited to the surface rather than scraped hard.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Do I have to be there?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
What if the leak is not the sealant?
We’ll tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, and we will not reseal for the sake of it.
Can you remove sealant that’s been put over old sealant?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
How long does remedial resealing take?
Allow a few hours for a typical bath or shower, longer where several layers have been applied. We’ll give you a timescale when we quote.
Remedial sealant around Streat
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Streat Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Plumpton station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Streat is about 3 miles south-east of Burgess Hill, in West Sussex. Jobs in Streat get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 371 towns and villages across West Sussex, from the larger towns to small villages. For nearby work, see our Brighton page.
All of BN6 and BN7 is covered for remedial sealant, from the main roads to the quietest streets. Neighbouring places we cover for remedial sealant include Plumpton (1 mile south-east), Plumpton Green (1 mile north-east), East Chiltington (1 mile east), Ditchling Common (2 miles north) and Chiltington (2 miles east). Within a short drive, we also cover Crawley (14 miles north), Horsham (15 miles north-west), Worthing (15 miles south-west), Haywards Heath (6 miles north), Burgess Hill (3 miles north-west) and East Grinstead (15 miles north).
Near you in Streat
For rail, the closest station is Plumpton station, about 1.1 miles north-east of the centre. Other landmarks nearby include Ditchling Museum of Art + Craft (1.6 miles west) and Lewes Victoria Hospital (4.5 miles south-east). Not far away are Ditchling Beacon and Bedelands Farm Nature Reserve.
Common problems we fix in Streat
Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
These are the problems we are asked about most:
- Gaps opening along the back of the worktop
- Torn expansion joints
- Caulk or the wrong sealant used in a wet area
- Thick, messy sealant smeared over tiles
Schools such as Plumpton Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before booking anyone
- Whether they seal over old material or remove it
- How the surfaces are prepared before sealing
- What the cure time is
- What happens if the job turns out different
Should I try it myself first?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
How it works
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for most joints, depending on how much old sealant has to come out. In a small place like Streat, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Mention any tricky access
- Let us know about earlier repairs to the joints
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.