West Sussex · England

Fire Rated Sealant in Streat

Fire rated sealant for Streat, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Gaps flagged on a fire risk assessment
  • Gaps around pipes and cables through fire-resisting walls
  • Fire stopping disturbed by later work

Fire rated sealant near Streat

Landlords, agents and businesses in Streat

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.

How we handle fire rated sealant in Streat

A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That detail is what we take care over. If you’re dealing with fire stopping disturbed by later work and open gaps behind door architraves, we can help, on flats & HMOs, door frames and service penetrations alike.

Work in a small place like Streat is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.

You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.

Where
Streat (BN6, BN7)
Region
West Sussex
Cover
One year on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

Surface by surface

Linear gaps

Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.

Plasterboard walls

Plasterboard partitions are common in flats, offices and conversions. The sealant has to be one tested in plasterboard.

What happens on the day

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes from a few hours to a few days, depending on the number of gaps and the access, and the area is left clean. Somewhere as small as Streat, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We start with the survey or action list, checking the size and surfaces of every gap.
  2. Anything that isn’t fit for the job comes out, and the gap is cleaned.
  3. Backing or fill is fitted where the product’s tested detail calls for it.
  4. The sealant goes in to the depth its detail sets, then it’s tooled off.
  5. Locations and products are noted so you have them on file.

Getting ready for the visit

  • Let us know about stairs, lifts or work at height
  • Clear items away from the joints we’re working on
  • Plan for the work area to be out of bounds to pets and children

How to get a quote

Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and give you a clear price.

Get a price

Read more

What sealant work cannot fix

A few problems are outside what sealant work can do:

  • Doors that aren’t fire doors in the first place
  • Walls or floors that weren’t built to resist fire
  • Deciding what fire stopping a building needs

If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before booking.

Where we work in Streat

  • Pipe & cable gaps
  • Flats & HMOs
  • Service penetrations
  • Plasterboard & masonry
  • Door frames
  • Linear gaps

Commercial buildings in Streat

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.

Rented homes near Plumpton station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. For buildings such as Streat Church, gaps around pipes and cables are worth checking after any building work there.

Streat is about 3 miles south-east of Burgess Hill, in West Sussex. We carry out fire rated sealant for homes and businesses in Streat and nearby, as part of our work across West Sussex. Streat is one of 371 places in West Sussex we cover. There’s also a page for Brighton, roughly 6 miles from Streat.

Every address in BN6 and BN7 is covered for fire rated sealant, from the main roads to the quietest streets. Neighbouring places we cover for fire rated sealant include Plumpton (1 mile south-east), Plumpton Green (1 mile north-east), East Chiltington (1 mile east), Ditchling Common (2 miles north) and Chiltington (2 miles east). Further out, we also cover Crawley (14 miles north), Horsham (15 miles north-west), Worthing (15 miles south-west), Haywards Heath (6 miles north), Burgess Hill (3 miles north-west) and East Grinstead (15 miles north).

Landmarks near Streat

Streat’s nearest station is Plumpton station, roughly 1.1 miles north-east. Well-known places in the area include Ditchling Museum of Art + Craft (1.6 miles west) and Lewes Victoria Hospital (4.5 miles south-east). Green spaces nearby include Ditchling Beacon and Bedelands Farm Nature Reserve.

Map of Streat © OpenStreetMap contributors

Looking after it afterwards

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Photograph sealed gaps before they’re covered up
  • Allow for resealing whenever new services are run
  • Get damaged fire seals looked at promptly
  • Check whether a sealant can be painted before decorating over it

Don’t add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.

Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the job gets bigger.

When to call us in Streat

Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.

The problems people normally mention when they call include:

  • New service routes left unsealed after building work
  • Fire seals that have cracked with movement
  • Damaged fire sealant left by other trades
  • Gaps around pipes and cables through fire-resisting walls

If you look after a building such as Plumpton Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.

Comparing quotes

  • Whether you can choose the colour
  • What product goes in the joint
  • How long the guarantee is
  • How much experience the applicator has

10 questions to ask before booking

Streat questions

Is Streat in your area for fire rated sealant?

Yes, Streat is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.

Do you cover smaller places like Streat?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can I add another job to the visit?

Yes, and it often makes sense. Doing several areas at once is generally more efficient.

Is it worth trying it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Where is Mr Mastic based?

Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.

Do you provide details of the products used?

Yes. Every gap we seal is listed with the product used, so you have it on file.

What should I tell you?

The location, the problem and the rough size of the job. Photos by email help too.

What does intumescent mean?

An intumescent sealant expands when it gets hot to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.

Should I try it myself first?

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job