West Sussex · England
Singleton Remedial Sealant
Specialist remedial sealant for Singleton: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Over-sealed joints coming away
- Wide, uneven beads that look worse than the old ones
- Gaps opening along the back of the worktop
Remedial sealant in Singleton, done properly
Water on the floor does not always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that’s what we find, we’ll tell you rather than reseal something that won’t fix it. Typical jobs include worktop sealant that has shrunk and split and a second bead peeling off the first, across expansion joints, shrunken worktop sealant and failed movement joints.
For a small place like Singleton, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Singleton (PO18)
- Region
- West Sussex
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Get the cause of a repeat leak found before resealing
- Never seal over old silicone
- Don’t point over movement joints
- Run the fan after every shower
If we have found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Sorting it early limits the damage.
Leave it or put it right?
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and any film left behind stops new sealant sticking. Careful stripping is where most of our time goes. In a small place like Singleton, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and send you a clear quote before we start.
Why Singleton customers choose us
- Approved under the ARBOMaster scheme
- White, clear, grey or another colour, product permitting
- Anti-fungal sanitary silicone in wet areas
- Homes, businesses and hotels
Read what affects the cost and what customers say.
How the job changes by surface
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We work carefully to avoid adding to it, and point out any existing damage.
Worktops & kitchens
A loose worktop splits its sealant. That needs refixing before resealing, which we will point out.
Also in Singleton
For landlords and businesses
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured for the work.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
What sealant work can’t fix
In fairness, there are a few things sealant will not fix:
- Older mastics that may need an asbestos check before removal
- Movement from fittings that are not supported
- Tiles that have come away from the wall
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly before you book.
Surfaces we seal
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
Questions from Singleton
Will you come out to Singleton?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for hotels and guest houses in Singleton?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
How long before the joint can be used?
It depends on the product. We tell you how long to leave it before we go.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can failed expansion joints be resealed?
Yes. The depth is set with backing so the sealant only bonds to the two sides, which lets it stretch.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
What happens if the problem is the tray or the plumbing?
Then we explain what we’ve found. A plumber or fitter may be needed before any new sealant goes on.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Bathrooms and kitchens in Singleton
There are hotels and other places to stay in and around Singleton. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you live in an older home near The Parish Church of the Blessed Virgin Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Singleton CofE Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Singleton is about 5 miles north of Chichester, in West Sussex. Whether you’re in the middle of Singleton or further out, we cover remedial sealant for every kind of property. Singleton is one of 371 places in West Sussex where we work. There’s also a page for Portsmouth, roughly 16 miles from Singleton.
All of PO18 is within our area for remedial sealant. If you need remedial sealant at a property on Downley Close, The Leys and Charlton Road or a nearby road, we can help. Other places close to Singleton include Charlton (1 mile east), West Dean (1 mile west), East Dean (2 miles east), Cocking (3 miles north) and Heyshott (3 miles north-east). Larger places within reach include Bognor Regis (9 miles south), Chichester (5 miles south), Selsey (12 miles south), Littlehampton (12 miles south-east), Emsworth (9 miles south-west) and Rustington (13 miles south-east).
What’s near Singleton
Around Singleton, our work takes us to homes and buildings near The Partridge Inn and the streets around them. Nearby you will also find Weald and Downland Gridshell (within half a mile south-west) and Chichester Centre (4.5 miles south). Open spaces near Singleton include Levin Down and Kingley Vale National Nature Reserve.
What we do, step by step
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and tidy away. It normally takes a few hours for most joints, depending on how much old sealant has to come out. In a small place like Singleton, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
- Clear items away from the joints we’re working on
How to get a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.