West Sussex · England
Singleton Glazing Silicone
Our applicators work in Singleton on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.
- Leaking glazing joints on a rooflight
- Drips on the inside of a conservatory window
- New silicone smeared over old sealant
How the job changes by surface
Glass-to-glass joints
Frameless glass corners and panels are joined with silicone. We renew it with a clear or matching glazing silicone.
Glass balustrade bases
Glass balustrades sit in a channel that’s often finished with sealant. Failed sealant there lets water collect.
About our glazing silicone in Singleton
Frameless shower screens rely on sealant to keep water in. Leaks normally come from the wall joint or the tray joint, and we reseal both. We work on rooflights, conservatory frames and glass-to-glass joints, and people most often call us about leaks where conservatory glass meets the frame and sealant that was laid over old silicone and failed.
In a village or hamlet like Singleton, older cottages and farmhouses often have timber windows set in stone or brick. Older buildings like these don’t always suit modern silicone, so the sealant has to be chosen to suit the building.
You are covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or drop us an email.
- Where
- Singleton (PO18)
- Region
- West Sussex
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What else we do in Singleton
Honest limits
In fairness, some problems need a different trade:
- Rotten or badly damaged frames
- Structural problems with a conservatory roof
- Glass that needs replacing
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly.
Surfaces we seal
- Rooflights
- Glass-to-glass joints
- Glass balustrade bases
- Conservatory frames
- Shower screens
- Glass-to-frame joints
How to look after the new joints
A little care helps the new joints last. We recommend:
- Do not leave a drip for the next storm
- Run a squeegee over the glass when you’re done
- Inspect the sealant on glazing annually
- Do not use a blade near the sealant
Check the joints once a year. Catching a split early keeps the repair small, before water gets in.
A leaking shower screen may not show at first. It can damage the floor or the ceiling below long before you see it.
Quotes for glazing silicone in Singleton
Your quote is based on your job. We take into account:
- The size of the job
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- The product the joint needs
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
What we need to know
When you contact us, these details help:
- Whether it’s a home or a business
- Roughly how big the job is
- If someone has resealed it before
- A few pictures by email, if you can
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved and send you a clear quote.
The process
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours, depending on how many joints need doing. Somewhere like Singleton needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We trace the leak and confirm it’s a sealant joint.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- We lay the new bead and tool it smooth.
- We check the finished joints and test with water where it’s safe.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
Getting a quote
We quote each job on its own, so start by telling us what you need. Just call 0345 464 0079 or send us an email with the details.
Read more
What glazing silicone looks like in Singleton
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. With historic houses such as West Dean House (about 1.2 miles west) nearby, there’s older building stock in the area around Singleton as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic.
For site and facilities teams at buildings such as Singleton CofE Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
Singleton is about 5 miles north of Chichester, in West Sussex. Every kind of property in Singleton is covered for glazing silicone. The work is guaranteed for a year. Across West Sussex, we cover 371 places, Singleton among them. Portsmouth is on our list too, about 16 miles from Singleton.
Here we cover the PO18 postcode area for glazing silicone. You will find streets such as Downley Close, The Leys and Charlton Road, and we cover them all. We also cover the places around Singleton: Charlton (1 mile east), West Dean (1 mile west), East Dean (2 miles east), Cocking (3 miles north) and Heyshott (3 miles north-east). Further out, we also cover Bognor Regis (9 miles south), Chichester (5 miles south), Selsey (12 miles south), Littlehampton (12 miles south-east), Emsworth (9 miles south-west) and Rustington (13 miles south-east).
Around Singleton
In Singleton, that means homes and buildings near The Partridge Inn and the streets around them. Well-known places in the area include Weald and Downland Gridshell (within half a mile south-west) and Chichester Centre (4.5 miles south). Green spaces nearby include Levin Down and Kingley Vale National Nature Reserve.
Why it’s worth doing now in Singleton
Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. Where a wall is exposed, as many are in small places like Singleton, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What you get with us
- We leave the area clean and tidy
- We’re fully insured
- Sealant colour chosen to suit
- Colour agreed with you before work begins
Take a look at what affects the cost and what customers say.
Common problems we fix in Singleton
On shower screens, constant water and cleaning products wear silicone. Mould gets into it and the joint starts to lift.
It’s worth asking for a quote if you see:
- Silicone pulling away from the glass
- Conservatory leaks at frame and glazing joints
- Failed sealant around rooflight glass
- Black or yellowed silicone on glass joints
In the older streets around The Parish Church of the Blessed Virgin Mary, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Comparing quotes
- What the cure time is
- How long the guarantee is
- How the surfaces are prepared before sealing
- Whether all the old sealant comes out first
FAQs for Singleton
Is Singleton in your area for glazing silicone?
Yes. We work across London and the South East, and Singleton is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Do you cover smaller places like Singleton?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Do you work for landlords and businesses?
Yes, regularly. Several properties can go on one quote, and between tenancies is a good time for the work.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you replace glass?
No, our work is the silicone. Glass and sealed units need a glazier.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Is it enough to run a bead over the old sealant?
Silicone does not stick to silicone, so a top-up soon lets water through. We cut out the old sealant first.