Kent · England
Remedial Sealant in Shorne Ridgeway
We cover Shorne Ridgeway for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- Worktop sealant that has shrunk and split
- Sealant applied over old sealant that has lifted
- A shower that leaks however often it’s resealed
Remedial sealant for homes and businesses in Shorne Ridgeway
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We’re fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. Common call-outs are for floor or wall movement joints that have failed and repeat leaks from the same joint, on mouldy bath & shower sealant, shrunken worktop sealant and failed movement joints.
For a small place like Shorne Ridgeway, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Big or small, you get the same one-year guarantee in Shorne Ridgeway and across Kent.
- Location
- Shorne Ridgeway (DA12)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Bathrooms and kitchens in Shorne Ridgeway
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as Church of St Peter and St Paul, walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as Shorne Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Higham station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Shorne Ridgeway is about 3 miles south-east of Gravesend, in Kent. Shorne Ridgeway gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 922 places across Kent. For nearby work, see our Chelmsford page.
Jobs for remedial sealant in DA12 is quoted and booked the same way as anywhere else. Local streets include Racefield Close, The Ridgeway and Tanyard Hill, all of which we cover. If you’re just outside Shorne Ridgeway, we cover Shorne (1 mile north), Upper Ifield (1 mile north-west), Higham (1 mile north-east), Gadshill (1 mile east) and Thong (1 mile west). We also work in nearby towns such as Maidstone (11 miles south-east), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Gravesend (3 miles north-west) and Northfleet (4 miles north-west).
What’s near Shorne Ridgeway
In Shorne Ridgeway, that means homes and buildings near Strood Academy, Shorne Woods Country Park and The Rose and Crown pub, among other places. The closest station to Shorne Ridgeway is Higham station, about 2 miles north-east of the centre. A little further out are French Hospital (3.4 miles south-east) and Rochester Castle (3.2 miles east). Green spaces nearby include Gad's Hill and Sawyers Lake.
How we quote for remedial sealant
There’s no set price list, because no two jobs are the same. What we look at:
- The number and length of the joints
- How easy the joints are to reach
- Working hours on commercial sites
- How many areas need sealing
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
The process
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes a few hours, depending on how many layers have to come out from start to finish. In a small place like Shorne Ridgeway, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any parking rules near the property
- Mention any leaks or damp you’ve noticed
Getting a quote
To get a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. You will have a clear quote before work begins.
Related advice
Why deal with it now?
Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. In a small place like Shorne Ridgeway, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
Why Shorne Ridgeway customers choose us
- We leave the area clean and tidy
- 20+ years of sealant experience
- A choice of colours where the product allows
- Rated 4.9 stars on Google
Read what affects the cost and what customers say.
How the job changes by surface
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, and then we reseal it neatly.
Leaking trays & enclosures
A cracked tray, failed valve or leaking waste needs a different fix. We say so rather than reseal.
Work for landlords, hotels and businesses
If you manage several properties in or around Shorne Ridgeway, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Also in Shorne Ridgeway
FAQs for Shorne Ridgeway
Do you cover Shorne Ridgeway for remedial sealant?
Yes, Shorne Ridgeway is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and tell us what needs doing, and we’ll send you a clear quote.
Do you cover smaller places like Shorne Ridgeway?
Yes. Shorne Ridgeway is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
What if the leak is not the sealant?
We will tell you. A cracked tray, faulty valve or leaking waste needs a different trade, and we won’t reseal for the sake of it.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Can you remove sealant that’s been put over old sealant?
Yes. We remove every layer; new silicone doesn’t bond to old silicone, which is why over-sealing fails.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Do you have insurance?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Honest limits
In fairness, there are a few things sealant will not fix:
- Tiles that have come away from the wall
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- A leaking trap, valve or supply pipe
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Where we work in Shorne Ridgeway
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
- Failed movement joints
- Botched or over-sealed joints
Keeping the joints in good condition
After the cure time, these simple habits help:
- Keep bleach and abrasives off the bead
- Look for stains below bathrooms now and then
- Don’t add new sealant on top of old
- Do not wait for a small gap to become a leak
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Mould under a second layer of sealant keeps growing out of sight. When it finally shows, the whole bead needs to come out.