Kent · England
Fire-rated sealant in Shorne Ridgeway, Kent
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Shorne Ridgeway, with a 12-month guarantee on every job. Ask us for a quote.
- Open joints along the top of partitions
- Unsealed gaps where pipes and cables go through a wall
- Standard silicone or caulk in a fire-stopping gap
Fire rated sealant for homes and businesses in Shorne Ridgeway
Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Common call-outs are for open joints along the top of partitions and open gaps behind door architraves, on plasterboard & masonry, service penetrations and door frames.
In a village or hamlet like Shorne Ridgeway, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
You get a 12-month guarantee, the same in Shorne Ridgeway as everywhere else we work.
- Location
- Shorne Ridgeway (DA12)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Workplaces and buildings in Shorne Ridgeway
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For landlords with property near Higham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Church of St Peter and St Paul are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Shorne Ridgeway is about 3 miles south-east of Gravesend, in Kent. Across the DA12 area, we cover fire rated sealant for homes and businesses. Shorne Ridgeway is one of 922 places in Kent we cover. You can also see our page for Chelmsford, roughly 23 miles from Shorne Ridgeway.
All of DA12 is within our area for fire rated sealant, from the main roads to the quietest streets. You will find streets such as Racefield Close, The Ridgeway and Tanyard Hill. Other places close to Shorne Ridgeway include Shorne (1 mile north), Upper Ifield (1 mile north-west), Higham (1 mile north-east), Gadshill (1 mile east) and Thong (1 mile west). We also work in nearby towns such as Maidstone (11 miles south-east), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Gravesend (3 miles north-west) and Northfleet (4 miles north-west).
Landmarks near Shorne Ridgeway
Locally, jobs take us to homes and businesses close to Strood Academy, Shorne Woods Country Park and The Rose and Crown pub and the streets around them. Shorne Ridgeway’s nearest station is Higham station, roughly 2 miles north-east. A little further out are French Hospital (3.4 miles south-east) and Rochester Castle (3.2 miles east). Open spaces near Shorne Ridgeway include Gad's Hill and Sawyers Lake.
More services for Shorne Ridgeway
How the job changes by surface
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before work begins so residents know what to expect.
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Your questions about fire rated sealant in Shorne Ridgeway
Do you cover Shorne Ridgeway for fire rated sealant?
Yes, Shorne Ridgeway is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.
I let a flat near Higham station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Do you have insurance?
Yes, we are fully insured for every job we do.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Can I choose the sealant colour?
In most cases you can choose. We will explain which colours are available and agree one before any work starts.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Can I add another job to the visit?
Yes. Just list everything you need and we’ll quote it together.
Do you need fire rated sealant in Shorne Ridgeway?
Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk in a place that needed a tested fire seal. It looks sealed, but it isn’t fire-rated.
If you can see any of these, it’s time to have the joints looked at:
- New service routes left unsealed after building work
- Sealant items on a fire risk assessment action list
- Fire stopping disturbed by later work
- Fire seals that have cracked with movement
Schools such as Shorne Church of England Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Before you book anyone
- How the joint is cleaned and prepared
- Are they insured?
- What happens if the job turns out different
- Whether all the old sealant comes out first
How we quote for fire rated sealant
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- How many areas need sealing
- The number and length of the joints
Doing several joints on one visit normally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- How many joints, rooms or windows are involved
- Photos by email, if that’s easy
- How we’d reach the joints
- If it’s domestic, commercial or a hotel
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work.
What sealant work cannot fix
We will always be straight with you, so here’s what new sealant won’t do:
- Fire risk assessments, which need a qualified assessor
- Large holes that need a different fire-stopping system
- Construction that does not provide fire resistance on its own
If you’re not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer before booking.
What we seal
- Flats & HMOs
- Plasterboard & masonry
- Door frames
- Linear gaps
- Pipe & cable gaps
- Service penetrations
The process
At the end, we look at the finished work together. The work normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the amount of work. Somewhere as small as Shorne Ridgeway, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Let us know about parking restrictions
- Tell us about any water getting in
Getting a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.