Kent · England
Remedial Sealant in Shorne
Remedial sealant for Shorne and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Decorators’ caulk around a bath or shower
- Over-sealed joints coming away
- Sealant that came away because the surface wasn’t prepared
The process
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Shorne, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Tell us about access, such as stairs, a lift or high-level joints
- For business premises, tell us about site rules or sign-in
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, phone 0345 464 0079 or email us.
Advice
How we handle remedial sealant in Shorne
Two decades of sealant work means we recognise most failures quickly. We’re ARBOMaster approved and fully insured, and remedial work carries our 12-month guarantee. If you have a shower that leaks however often it’s resealed and sealant applied over old sealant that has lifted, we can put it right.
Being in a small place like Shorne makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or email us.
- Where
- Shorne (DA12)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Nearby places to Shorne
Also in Shorne
Do you need remedial sealant in Shorne?
Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. Each fails in its own way.
Any of these means the joints need attention:
- Mould trapped under a layer of silicone
- Sealant applied over old sealant that has lifted
- Leaks that keep coming back after resealing
- Beads that never stuck properly
If you live in an older home near Church of St Peter and St Paul, older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- What preparation is included
- How long the guarantee is
- How hidden problems are handled
- What insurance they hold
What remedial sealant looks like in Shorne
Shorne is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For landlords with property near Higham station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Schools such as Shorne Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Shorne is about 2 miles south-east of Gravesend, in Kent. For remedial sealant in and around Shorne, please phone 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover Kent. Shorne is one of 922 places in Kent we cover for remedial sealant. For nearby work, see our Chelmsford page (22 miles or so).
Work in DA12 works the same way as everywhere else we cover. We cover properties on The Street, Cob Drive and Crown Green. Close by, we work in Upper Ifield (1 mile west), Shorne Ridgeway (1 mile south), Higham (1 mile east), Thong (1 mile west) and Gadshill (1 mile east). We also work in nearby towns such as Maidstone (11 miles south), Sittingbourne (14 miles east), Dartford (9 miles west), Sevenoaks (14 miles south-west), Northfleet (4 miles west) and Swanley (11 miles west).
Around Shorne
Locally, jobs take us to homes and businesses close to The Rose and Crown pub, Shorne Woods Country Park and Thamesview School and the streets around them. For rail, the closest station is Higham station, about 1.7 miles north-east. Other landmarks nearby include Gravesham Museum (3.2 miles north-west) and Gravesham Community Hospital (3.4 miles north-west). The countryside around Shorne includes Rede Common and Gad's Hill.
Quotes for remedial sealant in Shorne
Call for a quick quote. The main things that affect it are:
- When we can work, for business premises
- The old material and how stubborn it is
- How easy the joints are to reach
- Any mould that needs treating
Combining jobs into one visit is generally more efficient than separate visits. We will send you a clear quote for the lot.
Helping us quote
Before you ask for a quote, have a think about:
- Photos by email, if that is easy
- The problem you’ve noticed
- If someone has resealed it before
- The rough size of the job
Getting a quote is simple: let us know the job and the location. A few photos by email make the job easier to understand.
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.
If you manage several properties in or around Shorne, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
Shorne: your questions answered
Do you work for landlords with property near Higham station?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Will you come out to Shorne?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you remove sealant that is been put over old sealant?
Yes. We remove every layer; over-sealing fails because silicone won’t bond to silicone.
When is the sealant fully cured?
It depends on the product. Before we leave, we’ll tell you the cure time.
Do you do commercial work?
Yes. We have worked for hotels, offices and other businesses and we’re fully insured.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
What happens if the problem is the tray or the plumbing?
We’ll tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, and we won’t reseal for the sake of it.
Do you fix expansion and movement joints?
Yes. The depth is set with backing so the sealant only bonds to the two sides.
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Honest limits
In fairness, there are a few things sealant will not fix:
- A bath, tray or worktop that moves until it’s properly fixed
- A cracked shower tray or bath (that needs repair or replacing)
- A leaking trap, valve or supply pipe
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Mouldy bath & shower sealant
- Expansion joints
- Failed movement joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
How the job changes by surface
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. That needs refixing before resealing, and we will tell you if we find it.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing rod or bond-breaker tape prevents it, letting the sealant flex between the two faces.