Kent · England
Remedial sealant & repairs in Ringwould, Kent
We cover Ringwould for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Sealant that came away because the surface wasn’t prepared
- Dark patches showing through the sealant
- Floor or wall movement joints that have failed
Ringwould: your questions answered
I let a flat near Walmer station. Can you help?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Is Ringwould in your area for remedial sealant?
Yes. We work across London and the South East, and Ringwould is part of that. Just phone 0345 464 0079 or email us with a few details of the job.
What happens if the problem is the tray or the plumbing?
In that case, we tell you what we’ve found. A plumber or fitter may be needed.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Can you strip sealant from an acrylic tray safely?
Yes. We cut and lift the old sealant with tools suited to the surface, and the residue is cleaned away. Any existing damage is pointed out before work begins.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
How we handle remedial sealant in Ringwould
Remedial jobs in Ringwould generally fall into a few patterns: over-sealed joints, hidden mould, repeat leaks and split movement joints. We strip each one back and start from scratch. We work on mouldy bath & shower sealant, shrunken worktop sealant and botched or over-sealed joints, and common reasons people get in touch are torn expansion joints and sealant applied over old sealant that has lifted.
Somewhere as small as Ringwould, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
You get a one-year guarantee, the same in Ringwould as everywhere else we work.
- Location
- Ringwould (CT14)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Bathrooms and kitchens in Ringwould
Ringwould is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Homes close to Church of St Nicholas include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Kingsdown and Ringwould CofE Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Ringwould is about 2 miles south of Deal, in Kent. Every kind of property in Ringwould is covered for remedial sealant. The work is guaranteed for a year. We cover 922 towns and villages across Kent. We also work in Chelmsford, around 54 miles away.
Postcode districts we cover here for remedial sealant: CT14. You will find streets such as Back Street, Front Street and Queen's Rise. Main roads around Ringwould include the A258, so getting to you is simple. Neighbouring places we cover for remedial sealant include Kingsdown (1 mile east), Martin (1 mile south-west), Martin Mill (1 mile south-west), Sutton (2 miles north-west) and East Langdon (2 miles south-west). We also work in nearby towns such as Canterbury (14 miles north-west), Margate (14 miles north), Dover (5 miles south-west), Folkestone (11 miles south-west), Ramsgate (11 miles north) and Broadstairs (13 miles north).
Landmarks near Ringwould
In Ringwould, that means homes and buildings near Five Bells pub and Goodwin Academy and the streets around them. For rail, the closest station is Walmer station, about 1.3 miles north. Well-known places in the area include Walmer Castle (1.6 miles north-east) and St Margaret's Museum (2.6 miles south).
When it is not the sealant
New sealant cannot fix everything, and we will tell you before work begins. Sealant will not put right:
- Older mastics that may need an asbestos check before removal
- A leaking trap, valve or supply pipe
- A tray or worktop that needs refixing first
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.
What we seal
- Failed movement joints
- Shrunken worktop sealant
- Expansion joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What happens on the day
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for a typical bath or shower, longer where several layers have been applied, and the area is left clean. For a village or hamlet like Ringwould, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Before we arrive
- Tell us about any water getting in
- Mention if the joints have been sealed before
- Move anything stored near the joints
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.
Advice
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Never fill a movement joint with mortar or grout
- Use a soft cloth, not a scourer, on silicone
- Keep the room well ventilated
- Deal with small splits early
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
What affects the cost of remedial sealant
For a quick quote, just ask. What matters most is:
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- Which sealant suits the joint
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- If it’s domestic, commercial or a hotel
- What the problem is, such as mould, gaps, leaks or cracking
- How many joints, rooms or windows are involved
- Any access issues, like height or stairs
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Signs you need remedial sealant in Ringwould
Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould, faster where ventilation is poor. At that point it has to come out.
Keep an eye out for these signs:
- Dark patches showing through the sealant
- Movement joints that have split or pulled away
- Sealant peeling off a dusty or damp surface
- A shower that leaks however often it’s resealed
Rented homes near Walmer station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What to look for in a quote
- Whether all the old sealant comes out first
- How the surfaces are prepared before sealing
- How the colour is chosen
- What happens if the job turns out different
Towns and villages near Ringwould
Also in Ringwould
Different surfaces, different methods
Windows & doors
A frame that keeps leaking may not be the mastic. We check the joint and tell you if it looks to be something else.
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed.