Kent · England
Remedial sealant & repairs in Kingsdown, Kent
Removing failed, mouldy or leaking sealant and putting it right for Kingsdown, backed by a one-year guarantee. Ask us for a quote.
- A second bead peeling off the first
- Decorators’ caulk around a bath or shower
- Floor or wall movement joints that have failed
About our remedial sealant in Kingsdown
If a joint has been resealed and is leaking again, it’s worth a proper look. Send photos when you phone 0345 464 0079 or drop us an email, and say how long ago it was last done. If you are dealing with wide, uneven beads that look worse than the old ones and black mould underneath the bead, we can put it right.
Even in a smaller place like Kingsdown, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
Your job is guaranteed for a year, as with all our work.
- Place
- Kingsdown (CT14)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Leave it or put it right?
Remedial work takes longer than a straight reseal, but rarely a lot: it takes a few hours for a typical bath or shower, longer where several layers have been applied. It’s far less disruption than resealing the same joint again and again. In an older home around Kingsdown, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
Why Kingsdown clients choose us
- Over 20 years’ experience
- Fully insured
- Tidy, careful work
- Colour agreed with you before we start
See what affects the cost or our reviews.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Older mastics that may need an asbestos check before removal
- A cracked shower tray or bath (that needs repair or replacing)
- Failed tanking or loose tiles behind the sealant
If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
Kingsdown questions
Do you work for landlords with property near Walmer station?
Yes. We work for letting agents and landlords as well as householders. Just phone 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Kingsdown?
Yes. Kingsdown is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you do commercial work?
Yes. Commercial and hotel work is a large part of what we do. We can talk about working times when we quote.
Can failed expansion joints be resealed?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Will you leave a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
How long does the work take?
It takes a few hours for most joints, depending on how much old sealant has to come out. We’ll give you a timescale when we quote.
How do I get a quote for remedial sealant in Kingsdown?
Every job is different, so each one gets its own quote. For a quick quote, ring 0345 464 0079 or email us and tell us what needs doing and where.
Signs you need remedial sealant in Kingsdown
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. None of them last.
Any of these means the joints need attention:
- Gaps opening along the back of the worktop
- Floor or wall movement joints that have failed
- Dark patches showing through the sealant
- Decorators’ caulk around a bath or shower
Rented homes near Walmer station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
What to look for in a quote
- Whether the sealant suits the joint
- What happens if they find a problem under the old sealant
- What insurance they hold
- What the cure time is
Places near Kingsdown
Also in Kingsdown
What we do, step by step
You don’t need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the job takes a few hours for most joints, depending on how much old sealant has to come out in most cases. Parking around Kingsdown is normally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
Before we arrive
- Clear the area around the work
- Plan for the work area to be out of bounds to pets and children
- For business premises, tell us about site rules or sign-in
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Related advice
Bathrooms and kitchens in Kingsdown
Kingsdown is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Kingsdown and Ringwould CofE Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as St. John the Evangelist, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Kingsdown is about 2 miles south of Deal, in Kent. Across the CT14 area, we can carry out remedial sealant at your property. We cover 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for Chelmsford, about 55 miles away.
Every address in CT14 is within our area for remedial sealant, from the main roads to the quietest streets. Whether your property is on King's Close, Clim Down and The Rise or anywhere close by, our applicators can take on the job. We also cover Ringwould (1 mile west), Martin Mill (2 miles south-west), Martin (2 miles west), Sutton (2 miles west) and St Margaret's at Cliffe (3 miles south-west). We also work in nearby towns such as Canterbury (15 miles north-west), Margate (13 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (11 miles north) and Broadstairs (12 miles north).
What’s near Kingsdown
Locally, jobs take us to homes and businesses close to Goodwin Academy and Kings Head pub. For rail, the closest station is Walmer station, roughly 1.3 miles north-west. A little further out are Royal Victoria Hospital (5.6 miles south-west) and Kent Museum of the Moving Image (2.6 miles north).
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Air the bathroom so the sealant can dry
- Keep bleach and abrasives off the bead
- Ask why a joint failed before redoing it
- Act on a lifting corner straight away
Keep the room ventilated: run the fan during and after showers, or open a window.
Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.
What the job involves on each surface
Movement & expansion joints
Movement joints in floors, walls and façades need a flexible sealant set to the right depth. We remove the failed sealant, fit backing and reseal.
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed in a colour to suit.