Greater London · England
Pinner Remedial Sealant
Remedial sealant for Pinner and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Beads that never stuck properly
- Worktop sealant that has shrunk and split
- Movement joints that have split or pulled away
Remedial sealant in Pinner
A joint that keeps letting you down needs more than another bead. It helps to have photos when you call 0345 464 0079 or email us, and say how long ago it was last done. We work on leaking tray & enclosure joints, expansion joints and mouldy bath & shower sealant, and common reasons people get in touch are gaps opening along the back of the worktop and sealant that came away because the surface wasn’t prepared.
In much of London, period terraces have been converted into flats over the years, with bathrooms fitted into whatever space was available. A compact bathroom that steams up every day is hard on silicone and grout, and homes in Pinner are no different.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Pinner (HA5)
- Region
- Greater London
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Quotes for remedial sealant in Pinner
We do not publish a price list, because no two jobs are the same. The quote depends on:
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
- Mould in or behind the old joints
- The number of rooms or windows
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Where the property is
- The rough size of the job
- The type of property
- A few photos by email, if you can
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you are ready, phone 0345 464 0079 or send us an email.
What the job involves on each surface
Movement & expansion joints
A sealant stuck to the back of the joint cannot stretch. Backing stops that, letting the sealant flex between the two faces.
Mouldy bath & shower sealant
Repeat mould normally points to a damp, poorly aired room. We’ll reseal and tell you if extraction looks to be the issue.
Signs you need remedial sealant in Pinner
Sealant needs a clean, dry surface with no grease on it. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.
If you can see any of these, it’s time to have the joints looked at:
- Sealant that came away because the surface wasn’t prepared
- Worktop sealant that has shrunk and split
- Floor or wall movement joints that have failed
- Dark patches showing through the sealant
If you look after a building such as West Lodge Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Before booking anyone
- When the joint can take water or movement
- How much experience the applicator has
- What insurance they hold
- What preparation is included
Bathrooms and kitchens in Pinner
London’s water is hard, which leaves limescale on sealant, grout and taps. London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early.
Rented homes near Hatch End station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. If you live in an older home near Christian Science Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Pinner is about 1 mile north-east of Ruislip, in Greater London. Anywhere in HA5, we can carry out remedial sealant at your property. Across Greater London, we cover 764 places, and Pinner is one of them. London is on our list too, about 14 miles from Pinner.
Jobs for remedial sealant in HA5 works the same way as everywhere else we cover. Whether your property is on Love Lane, Tudor Road and Marsh Road or anywhere close by, we can help. If you’re just outside Pinner, we cover Pinner Green (1 mile north-west), Eastcote (1 mile south), North Harrow (1 mile south-east), Roxbourne (1 mile south) and Rayners Lane (2 miles south-east). Within a short drive, we also cover London (14 miles south-east), City of Westminster (12 miles south-east), Marylebone (12 miles south-east), Kensington (10 miles south-east), St Pancras (13 miles east) and Shoreditch (14 miles east).
Local landmarks in Pinner
Locally, jobs take us to homes and businesses close to Pinner High School, Heathfield School and The Oddfellows Arms, among other places. For rail, the closest station is Hatch End station, about 1.4 miles north-east. Nearby you will also find Northwood and Pinner Cottage Hospital (1.3 miles north-west) and St. George's Shopping Centre (2.3 miles east). For a walk, there’s Horse Shoe Bay and Northala Fields.
When it is not the sealant
To be straight with you, there are a few things sealant will not fix:
- A cracked shower tray or bath (that needs repair or replacing)
- Tiles that have come away from the wall
- A leaking trap, valve or supply pipe
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Where we work in Pinner
- Botched or over-sealed joints
- Failed movement joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Expansion joints
Towns and villages near Pinner
What else we do in Pinner
Leave it or put it right?
DIY removal often leaves scratches and a film of residue, and any film left behind stops new sealant sticking. Careful removal is most of a remedial job. In London conversions, one flat’s bathroom is often above another flat’s ceiling, so a small leak from tired sealant can mean a neighbour’s ceiling and a lot of disruption. Dealing with it early is far simpler for homes in Pinner.
What you pay reflects the work, not guesswork. That is why we ask about the job first and give you a clear price before any work starts.
Why Pinner clients choose us
- More than 20 years in sealant work
- Old sealant always removed completely
- An ARBOMaster approved applicator
- Trusted Arbo and Everbuild sealants
Read our cost guide and what customers say.
Pinner: your questions answered
I let a flat near Hatch End station. Can you help?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Is parking a problem for a job in Pinner?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. The visit is then planned around what’s available.
Where are you based?
Our base is Crawley. We work across South East England, London and Scotland.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Do you take out the old sealant first?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
How long does remedial resealing take?
That depends on how many layers there are and how many joints. You will have a timescale before any work begins.
Can old silicone be taken off without scratching the tiles?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
How it works
When we arrive, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before work begins. The work generally takes a few hours for a typical bath or shower, longer where several layers have been applied. Parking in much of London is by permit or pay-and-display, so it helps to know what’s near you in Pinner. A visitor permit or a nearby bay makes the visit run more smoothly.
- First we find out how and where the joint has failed.
- We strip the joint completely, removing any layers below.
- We clean the joint, treat any mould and let it dry.
- Moving joints get backing and a flexible sealant to suit.
- We tool the joint and tell you about anything else that needs attention.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- On commercial sites, let us know about site rules
- Let us know about earlier repairs to the joints
Get a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. Photos by email help us understand the job.