Edinburgh · Scotland
Remedial sealant & repairs in Parkhead, Edinburgh
Specialist remedial sealant for Parkhead: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Beads that never stuck properly
- Products that weren’t meant for the joint
- Worktop sealant that has shrunk and split
Can I do it myself?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
About our remedial sealant in Parkhead
A joint that keeps failing normally has a reason. Movement, the wrong product or a leak from somewhere else will beat any new bead. Finding that cause comes before any new sealant. We work on leaking tray & enclosure joints, mouldy bath & shower sealant and failed movement joints, and the jobs we see most are beads that never stuck properly and worktop sealant that has shrunk and split.
From stone-built tenements to new flats and suburban houses, Parkhead is in a city with every kind of home. Generally soft Scottish water means less limescale, but steam and poor ventilation still let mould into the sealant and grout.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Where
- Parkhead (EH14, EH11)
- Wider area
- Edinburgh
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Remedial sealant around Parkhead
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out. Edinburgh has a lot of tenement flats, in the Old and New Towns and well beyond, where a failed seal can soon reach the flat below.
If you let a flat or house near Kingsknowe station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Parkhead is about 2 miles south-west of Edinburgh, in Edinburgh. Jobs in Parkhead get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 175 places in Edinburgh are on our list.
Jobs for remedial sealant in EH14 and EH11 works the same way as everywhere else we cover. Local streets include Redhall Road, New Mart Road and Longstone Road, and we cover them all. Main roads around Parkhead include the A71. Close by, we work in Longstone (1 mile south-west), Redhall (1 mile south-east), Kingsknowe (1 mile south), Chesser (1 mile north-east) and Saughton (1 mile north-west). Further out, we also cover Leith (5 miles north-east), Bonnington (4 miles north-east), Greenside (4 miles north-east), Broughton (4 miles north-east), Bellevue (4 miles north-east) and Silvermills (3 miles north-east).
Around Parkhead
Around Parkhead, our work takes us to homes and buildings near Cross Keys Tavern, Balgreen Primary School and Saughton Park, among other places. There’s a railway station in Parkhead itself: Kingsknowe station. A little further out are War Poets Collection (1.2 miles west) and Merchiston Tower (1.8 miles east). The countryside around Parkhead includes Craiglockhart Hill and Duddingston Loch.
Quotes for remedial sealant in Parkhead
There’s no set price list. What we look at:
- Access and height
- Any mould that needs treating
- The type of sealant required
- How many rooms, windows or areas are involved
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
What to tell us for a quote
When you call or email, it’s useful to know:
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- The rough size of the job
- A few pictures by email, if you can
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you are ready, email us at info@mrmastic.co.uk.
Also in Parkhead
Parkhead questions
I’m in a tenement in Parkhead. Could worn sealant affect the flat downstairs?
Yes, and the first sign is often a mark on the ceiling below. A proper reseal, with all the old sealant cut out, stops it at the source.
Do you cover Parkhead for remedial sealant?
Yes. Our work covers the whole of Scotland, and Parkhead is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
When is the sealant fully cured?
Cure times vary by product and the temperature. Before we leave, we’ll tell you the cure time.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. Most jobs take a few hours, and we confirm the time with your quote.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
What if resealing won’t fix my leak?
In that case, we tell you what we’ve found. A plumber or fitter may be needed before any new sealant goes on.
Do you work for landlords and businesses?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Do not add new sealant on top of old
- Check trays and worktops don’t move
- Run the fan after every shower
- Keep movement joints clear of mortar and paint
Don’t let anyone seal over it later. New silicone doesn’t bond to old.
Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
How it works
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It generally takes a few hours for a typical bath or shower, longer where several layers have been applied. For a tenement in Parkhead, work inside your flat is between us and you, while shared parts may need the factor or neighbours to agree. Tell us which applies when you book.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Keep pets and children clear of the area while we work
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
Ask for a quote
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
Landlord and commercial work in Parkhead
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
When something else is needed
A few problems are outside what sealant work can do:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath, tray or worktop that moves until it’s properly fixed
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If you are not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before you book.
What we seal
- Failed movement joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Expansion joints
What we’re called out for in Parkhead
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.
It’s worth asking for a quote if you see:
- Movement joints that have split or pulled away
- Kitchen joints letting water behind the worktop
- Thick, messy sealant smeared over tiles
- Decorators’ caulk around a bath or shower
Managing a site like Merchiston Castle School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before booking
- Whether all the old sealant comes out first
- How long to leave it before use
- Which sealant they’ll use, and why
- What the quote includes, VAT included or not