Highland · Scotland
Remedial Sealant in Melvich
Remedial sealant for Melvich and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Beads that never stuck properly
- Wide, uneven beads that look worse than the old ones
- Decorators’ caulk around a bath or shower
Bathrooms and kitchens in Melvich
Melvich is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Around Melvich, as everywhere, remedial sealant is only as good as the preparation behind it. For jobs in and around Melvich, choosing the right material for each joint is as important as a tidy finish.
Melvich (Gaelic: Meabhaich) is about 15 miles west of Thurso, in Highland. Jobs in Melvich get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Our Highland coverage runs to 253 places, and Melvich is one of them.
Our applicators cover all of KW14 for remedial sealant and the streets around it. Remedial sealant is available to properties on Melvich Terrace and Pentland Terrace. Close by, we work in Portskerra (1 mile north-west), Strathy (3 miles west), Reay (5 miles east), Forss (11 miles east) and Am Blàran Odhar (11 miles west). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
What’s near Melvich
The countryside around Melvich includes Loch Sgiathanach.
About our remedial sealant in Melvich
The wrong product in the wrong joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. If you have kitchen joints letting water behind the worktop and over-sealed joints coming away, we can put it right.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
You get a one-year guarantee, the same in Melvich as everywhere else we work.
- Place
- Melvich (KW14)
- Wider area
- Highland
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Also near Melvich
More services for Melvich
What the job involves on each surface
Over-sealed & botched joints
Every layer has to come out, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Mouldy bath & shower sealant
Black mould inside the bead will not scrub out. All of it comes out, and the joint is treated and dried before anti-fungal sanitary silicone goes in.
The process
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a typical bath or shower, longer where several layers have been applied, including the tidy-up. For a place like Melvich, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
How to prepare
- Move anything stored near the joints
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Advice
Landlords, agents and businesses in Melvich
Landlords and letting agents in Melvich can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
We also work for property managers and facilities teams in Melvich and across Highland. We can quote a run of properties together, and we are fully insured for the work.
When something else is needed
Before you book, it’s worth knowing the limits too:
- Cracks in the fitting rather than the joint
- A tray or worktop that needs refixing first
- A leaking trap, valve or supply pipe
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Where we work in Melvich
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
- Leaking tray & enclosure joints
Quotes for remedial sealant in Melvich
We do not publish a price list, because jobs vary so much. What we look at:
- How many rooms, windows or areas are involved
- Whether the work is at height
- Mould in or behind the old joints
- The number and length of the joints
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- What’s wrong with the joints now
- Any previous sealing or DIY work
- Any access issues, like height or stairs
- The type of property
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Never seal over old silicone
- Clean sealant with mild products only
- Have loose fittings fixed before resealing
- Air the bathroom so the sealant can dry
If we have found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
Don’t keep resealing the same joint. Get the cause found first, or the next bead will go the same way.
Common questions in Melvich
Will you come out to Melvich?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is Melvich in your area for remedial sealant?
Yes. Our work covers the whole of Scotland, and Melvich is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing.
How do I get a quote for remedial sealant in Melvich?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before any work starts.
Will there be a smell?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We’ll tell you how long to leave the joint.
Can you fix a reseal that hasn’t worked?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
Are you fully insured?
Yes, we are fully insured.