Kent · England
Remedial Sealant in Hoaden
We cover Hoaden for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Floor or wall movement joints that have failed
- Thick, messy sealant smeared over tiles
- A shower that leaks however often it’s resealed
Remedial sealant in Hoaden, done properly
If a joint has been resealed and is leaking again, it’s worth a proper look. Send photos when you phone 0345 464 0079 or send us an email, and say how long ago it was last done. We work on mouldy bath & shower sealant, leaking tray & enclosure joints and failed movement joints, and common reasons people get in touch are mould trapped under a layer of silicone and caulk or the wrong sealant used in a wet area.
For a small place like Hoaden, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Big or small, you get the same 12-month guarantee.
- Location
- Hoaden (CT3)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Remedial sealant around Hoaden
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Elmstone Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Minster station, botched sealant from a previous quick fix is easier to strip out between tenants.
Hoaden is about 7 miles east of Canterbury, in Kent. From the centre of Hoaden to the outskirts, remedial sealant is available for homes and businesses alike, from flats and houses to offices and hotels. 922 places in Kent are on our list. You can also see our page for Chelmsford, roughly 45 miles from Hoaden.
We cover every part of CT3 for remedial sealant and the streets around it. You will find streets such as Overland Lane and Walmestone Road, all of which we cover. Close by, we work in Nash (1 mile south-west), Perry (1 mile west), Elmstone (1 mile north-west), Shatterling (1 mile south-west) and Durlock (1 mile south-east). Further out, we also cover Canterbury (7 miles west), Margate (9 miles north-east), Dover (11 miles south), Folkestone (15 miles south), Ramsgate (8 miles north-east) and Broadstairs (9 miles north-east).
Local landmarks in Hoaden
Hoaden’s nearest station is Minster station, about 4 miles north-east of the centre. A little further out are White Mill (3.5 miles east). Not far away are Monk's Wall nature reserve.
Hoaden: your questions answered
I let a flat near Minster station. Can you help?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or email us with the details for a clear quote.
Is Hoaden in your area for remedial sealant?
Yes, Hoaden is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Are you fully insured?
Yes. We are fully insured, and we can confirm the details when we quote.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Can you strip sealant from an acrylic tray safely?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
How the job changes by surface
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, including the screen profile and tray edges.
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, in a colour that suits the frame.
Landlords, agents and businesses in Hoaden
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Why it’s worth doing now in Hoaden
Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. Dealing with the joint now is a small job by comparison. Older cottages and farmhouses around Hoaden can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please call 0345 464 0079 or send us an email and we’ll talk you through it.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Colour agreed with you before work begins
- Neat joints and a tidy finish
- Arbo and Everbuild products
See what affects the cost and what customers say.
DIY sealant or a professional job?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What we’re called out for in Hoaden
Using the wrong product is a common cause: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
Any of these means the joints need attention:
- A shower that leaks however often it’s resealed
- Worktop sealant that has shrunk and split
- Over-sealed joints coming away
- Sealant that came away because the surface wasn’t prepared
Schools such as Ash Cartwright and Kelsey Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before you book
- How long the guarantee is
- How the surfaces are prepared before sealing
- Who turns up on the day
- Whether the sealant suits the joint
Places near Hoaden
More services for Hoaden
When it is not the sealant
New sealant can’t fix everything, and we will tell you before any work starts. Sealant won’t put right:
- A tray or worktop that needs refixing first
- A cracked shower tray or bath (that needs repair or replacing)
- Failed tanking or loose tiles behind the sealant
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think before booking.
Surfaces we seal
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Failed movement joints
- Expansion joints
- Leaking tray & enclosure joints
- Botched or over-sealed joints
How it works
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the job takes a few hours for most joints, depending on how much old sealant has to come out in most cases. Somewhere like Hoaden needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
Ask for a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear price.