Kent · England
Remedial Sealant in Hemsted
Failed sealant joints in Hemsted need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Black mould underneath the bead
- Over-sealed joints coming away
- Kitchen joints letting water behind the worktop
Looking after it afterwards
So the new joints stay in good condition:
- Keep bleach and abrasives off the bead
- Report a tray that rocks or a worktop that lifts
- Ask why a joint failed before redoing it
- Look for stains below bathrooms now and then
Do not let anyone seal over it later. New silicone doesn’t bond to old.
Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
Remedial sealant in Hemsted, done properly
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. We’re often asked to deal with sealant applied over old sealant that has lifted and sealant peeling off a dusty or damp surface, across shrunken worktop sealant, botched or over-sealed joints and failed movement joints.
Being in a small place like Hemsted makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Where
- Hemsted (CT18)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
How it works
At the end, we look at the finished work together. The work normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on how much there is to do. Somewhere like Hemsted needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Let us know about stairs, lifts or work at height
- Mention any leaks or damp you’ve noticed
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Advice
Places near Hemsted
What else we do in Hemsted
Why act early in Hemsted
Hidden water does the most damage: wet floors, stained ceilings and swollen worktops. Dealing with the joint now is a small job by comparison. In a small place like Hemsted, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll explain what it covers.
What you get with us
- We’re fully insured
- Arbo and Everbuild products
- Anti-fungal silicone where joints get wet
- Over 20 years’ experience
Quotes for remedial sealant in Hemsted
You will get a clear quote before we start. It takes into account:
- Any mould that needs treating
- The type of sealant required
- Access and height
- The old material and how stubborn it is
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
What to tell us when you ask for a quote:
- What’s wrong with the joints now
- If someone has resealed it before
- Access, such as stairs, a lift or height
- Where the property is
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved.
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Hemsted: your questions answered
Can you help a landlord with a rental near Westenhanger station?
Yes, we work for landlords and agents. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Do you cover smaller places like Hemsted?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you work on commercial sites?
Yes. We can plan bigger jobs in stages.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Do you guarantee remedial jobs?
Yes, with our 12-month guarantee. Where we’ve flagged another fault, it needs fixing for the joint to last.
Can old silicone be taken off without scratching the tiles?
Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.
Is it messy?
We keep the work tidy. We protect what’s around the joints.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
How the job changes by surface
Movement & expansion joints
A movement joint must be able to stretch. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed.
Mouldy bath & shower sealant
Black mould inside the bead will not scrub out. All of it comes out, and the joint is treated and dried ahead of a new anti-fungal bead.
Hemsted homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Westenhanger station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. For an older house near a landmark such as Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant. Schools such as Stowting Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Hemsted is about 5 miles north of Hythe, in Kent. Across the CT18 area, our applicators can take on remedial sealant. 922 places in Kent are on our list, from the larger towns to small villages. There’s also a page for Chelmsford, about 48 miles away.
We cover every part of the CT18 postcode area for remedial sealant and the streets around it. If you are just outside Hemsted, we cover Woodland (1 mile south-east), Skeete (1 mile south), Stowting (1 mile west), Rhodes Minnis (1 mile north-east) and Stowting Common (1 mile north-west). Within a short drive, we also cover Ashford (8 miles west), Canterbury (10 miles north), Dover (11 miles east), Folkestone (6 miles south-east), Whitstable (15 miles north) and Faversham (14 miles north-west).
What’s near Hemsted
Hemsted’s nearest station is Westenhanger station, about 2.9 miles south of the centre. Well-known places in the area include Saltwood Castle (4 miles south) and Elham Valley Countryside Centre And Railway Museum (3.7 miles south-east). Not far away are Hatch Park and Tolsford Hill.