Kent · England
Stowting Remedial Sealant
Remedial sealant across Stowting and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Torn expansion joints
- Sealant applied over old sealant that has lifted
- Wide, uneven beads that look worse than the old ones
How it works
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a few hours, depending on how many layers have to come out. In a small place like Stowting, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Getting ready for the visit
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
Ask for a quote
We quote each job on its own, so the first step is telling us about yours. Just ring 0345 464 0079 or drop us an email with the details, and photos are welcome.
Read more
About our remedial sealant in Stowting
Remedial jobs in Stowting normally fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. If you have beads that never stuck properly and wide, uneven beads that look worse than the old ones, we can put it right.
In a village or hamlet like Stowting, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Where
- Stowting (TN25)
- Region
- Kent
- Cover
- One year on every job
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Landlord and commercial work in Stowting
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
When to call us in Stowting
Movement tears sealant that isn’t designed for it. A bath that flexes, a tray that rocks or a building joint that opens and closes split any bead that’s too stiff or too thin.
People normally contact us after spotting something like this:
- Kitchen joints letting water behind the worktop
- Black mould underneath the bead
- Decorators’ caulk around a bath or shower
- Sealant that came away because the surface wasn’t prepared
Managing a site like Stowting Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before booking anyone
- How the colour is chosen
- Is the old sealant removed completely?
- What guarantee comes with the work
- Which sealant they’ll use, and why
Remedial sealant around Stowting
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
In the older streets around Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant. Rented homes near Westenhanger station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.
Stowting is about 5 miles north-west of Hythe, in Kent. Our applicators cover remedial sealant for homes and businesses in Stowting, as part of our work across Kent. 922 places in Kent are on our list. Our Chelmsford page covers work nearby.
We work across TN25 for remedial sealant and the streets around it. Streets in the area include Stowting Hill and Scot's Lane. We also cover Stowting Common (1 mile north), Hemsted (1 mile east), Skeete (1 mile south-east), Woodland (1 mile east) and Rhodes Minnis (2 miles east). Further out, we also cover Ashford (7 miles west), Canterbury (10 miles north), Dover (11 miles east), Folkestone (7 miles south-east), Whitstable (15 miles north) and Faversham (14 miles north-west).
What’s near Stowting
Typical jobs here are in homes near Spong Wood and the streets around them. For rail, the closest station is Westenhanger station, about 3.1 miles south. Well-known places in the area include William Harvey Hospital (5.3 miles west) and Saltwood Castle (4.6 miles south-east). Not far away are Hatch Park and Tolsford Hill.
Leave it or put it right?
Stripping out botched sealant adds time to a reseal, but rarely a lot: it takes a few hours for most joints, depending on how much old sealant has to come out. It’s far less disruption than resealing the same joint again and again. In a small place like Stowting, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.
Why book with us
- Neat joints and a tidy finish
- A 12-month guarantee on all work
- White, clear, grey or coloured to suit, where the product allows
- ARBOMaster approved applicator
Take a look at how sealant jobs are priced and customer reviews.
Places near Stowting
Also in Stowting
When it isn’t the sealant
To be straight with you, there are a few things sealant will not fix:
- Plumbing leaks behind walls or under trays
- A cracked shower tray or bath (that needs repair or replacing)
- Older mastics that may need an asbestos check before removal
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before booking.
What we seal
- Shrunken worktop sealant
- Failed movement joints
- Expansion joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
Your questions about remedial sealant in Stowting
Do you cover smaller places like Stowting?
Yes. Stowting is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Westenhanger station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
How long before the joint can be used?
That depends on the sealant used, so please follow the time we give you.
Will there be a smell?
That depends on the sealant. Some smell for a while, some hardly at all.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Do you remove the old sealant?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
How long does the work take?
Allow a few hours for most joints, depending on how much old sealant has to come out. We will give you a timescale when we quote.
Different surfaces, different methods
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing stops that, so the sealant grips the two sides only.