Slough · England
Remedial sealant & repairs in Fulmer, Slough
We cover Fulmer for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Movement joints that have split or pulled away
- Smears and lumps from a botched reseal
- Worktop sealant that has shrunk and split
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Remedial sealant in Fulmer, done properly
Two decades of sealant work means we recognise most failures quickly. We’re ARBOMaster approved and fully insured, and remedial work carries our 12-month guarantee. We are often asked to deal with floor or wall movement joints that have failed and caulk or the wrong sealant used in a wet area, on expansion joints, shrunken worktop sealant and mouldy bath & shower sealant.
Around Fulmer, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
You are covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Location
- Fulmer (SL3)
- Wider area
- Slough
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
Sealant isn’t the answer to every problem, and we’ll tell you before any work starts. Sealant will not put right:
- A tray or bath that is cracked
- Water damage behind tiles that needs a tiler
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Joints and surfaces we work on
- Failed movement joints
- Mouldy bath & shower sealant
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
The process
Once we’re on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Fulmer needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
- Let us know about earlier repairs to the joints
Get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you are ready, phone 0345 464 0079 or email us.
Related advice
Common questions in Fulmer
Do you cover smaller places like Fulmer?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Fulmer in your area for remedial sealant?
Yes, Fulmer is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or email us and tell us what needs doing.
Can you fix a reseal that hasn’t worked?
Yes. We will take all the sealant out, look for why it failed and reseal it properly.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can old silicone be taken off without scratching the tiles?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
How long should I leave it?
That depends on the sealant used, so follow the cure time we give you.
How long does the work take?
A little longer than a standard reseal. For most joints, it’s a few hours.
More services for Fulmer
Landlord and commercial work in Fulmer
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured for the work.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
What happens if it’s left?
DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. Older cottages and farmhouses around Fulmer can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or send us an email and we will talk you through it.
Why Fulmer customers choose us
- 180+ five-star Google reviews
- Approved under the ARBOMaster scheme
- We leave the area clean and tidy
- Domestic, commercial and hotel work
Take a look at how sealant jobs are priced or our reviews.
How we quote for remedial sealant
Your quote is based on your job. We look at:
- Access and height
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
- The type of sealant required
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- Any access issues, like height or stairs
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it has been sealed before
- Photos by email, if that’s easy
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved.
What the job involves on each surface
Mouldy bath & shower sealant
Mould that has grown into silicone doesn’t clean out for good. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.
Movement & expansion joints
A movement joint must be able to stretch. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed.
Remedial sealant in Fulmer: local notes
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Gerrards Cross station, a joint that keeps failing is best fixed properly while the property is empty. For an older house near a landmark such as Church of St James, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Fulmer Infant School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Fulmer is about 4 miles north-east of Slough, in Slough. We provide remedial sealant to householders, landlords and businesses in Fulmer. Our area takes in 31 places across Slough. You can also see our page for London, about 20 miles away.
Postcode districts we cover here for remedial sealant: SL3. That includes homes and businesses on Fulmer Road, Alderbourne Lane and Hay Lane. We also cover the places around Fulmer: Tatling End (1 mile north-east), Wexham Street (1 mile south-west), Gerrards Cross (1 mile north), Stoke Poges (2 miles south-west) and Rush Green (2 miles east). Within a short drive, we also cover Slough (4 miles south-west), Cippenham (5 miles south-west), Chalvey (4 miles south-west), Britwell (3 miles south-west), Langley (4 miles south) and Upton (4 miles south).
Landmarks near Fulmer
Locally, jobs take us to homes and businesses close to Bulstrode Park, The Black Horse Public House and Khalsa Secondary Academy. The closest station to Fulmer is Gerrards Cross station, roughly 1.9 miles north. Nearby you’ll also find British Airways Heritage Collection (3.5 miles south-east) and Wexham Park Hospital (2.2 miles south). Green spaces nearby include Horse Shoe Bay and Stoke Common.