Fife · Scotland
Fordell Firs Remedial Sealant
Professional remedial sealant in and around Fordell Firs, with old sealant always removed completely and a 12-month guarantee.
- A shower that leaks however often it’s resealed
- Sealant applied over old sealant that has lifted
- Wide, uneven beads that look worse than the old ones
For landlords and businesses
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
Remedial sealant in Fordell Firs
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are ARBOMaster approved and fully insured, and remedial work carries our one-year guarantee. If you have dark patches showing through the sealant and floor or wall movement joints that have failed, we can help, on leaking tray & enclosure joints, mouldy bath & shower sealant and failed movement joints alike.
In and around a place like Fordell Firs, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
You get a one-year guarantee, the same in Fordell Firs as everywhere else we work.
- Place
- Fordell Firs (KY11)
- Wider area
- Fife
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Signs you need remedial sealant in Fordell Firs
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes split any bead that’s too stiff or too thin.
Any of these means the joints need attention:
- Decorators’ caulk around a bath or shower
- Worktop sealant that has shrunk and split
- A shower that leaks however often it’s resealed
- Thick, messy sealant smeared over tiles
If you let a flat or house near Dalgety Bay station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What your quote should include
- Whether VAT is included
- Who does the work, and how experienced they are
- Which sealant they’ll use, and why
- Are they insured?
How to look after the new joints
After the cure time, these simple habits help:
- Never seal over old silicone
- Check trays and worktops do not move
- Ask why a joint failed before redoing it
- Deal with small splits early
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant cannot hold back a problem underneath.
If a joint has failed more than once, stop resealing it. Have someone find out why, otherwise the next attempt will fail too.
Why act early in Fordell Firs
DIY removal often leaves scratches and a film of residue, and any film left behind stops new sealant sticking. Careful stripping is where most of our time goes. In an older home around Fordell Firs, damp from a failed joint can get into timber and plaster.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Why choose Mr Mastic in Fordell Firs
- Sanitary silicone with an anti-fungal additive in wet areas
- Quality sealants from Arbo and Everbuild
- ARBOMaster approved applicator
- You choose the colour before work begins
Common questions in Fordell Firs
Do you work in hotels near Fordell Firs?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Will you come out to Fordell Firs?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
How do I get a quote for remedial sealant in Fordell Firs?
Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.
Can failed expansion joints be resealed?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
Are you fully insured?
Yes. We are fully insured.
My shower still leaks after a reseal. Can you sort it?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, and we deal with the cause first.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we are using and why.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes a few hours, depending on how many layers have to come out. Outdoor work around Fordell Firs depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Clear the area around the work
Getting a quote
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.
Read more
What we can’t put right
It helps to know what we cannot do too:
- A cracked shower tray or bath (that needs repair or replacing)
- A tray or worktop that needs refixing first
- A leaking trap, valve or supply pipe
If you’re not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Expansion joints
Also near Fordell Firs
Other services in Fordell Firs
Bathrooms and kitchens in Fordell Firs
Fordell Firs is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
If you look after a building such as Inverkeithing High School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Fordell Firs is about 2 miles south-east of Dunfermline, in Fife. If you need remedial sealant in Fordell Firs, please drop us a line at info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Fife, Fordell Firs included. We cover 133 towns and villages across Fife. For nearby work, see our Edinburgh page, about 10 miles away.
Every address in KY11 is within our area for remedial sealant, from the main roads to the quietest streets. Nearby, we also carry out remedial sealant in Hillend (1 mile south), Dalgety Bay (2 miles south-east), Inverkeithing (2 miles south-west), Crossgates (2 miles north) and Jamestown (2 miles south). Larger places within reach include Kirkcaldy (10 miles north-east), Glenrothes (13 miles north-east), Cowdenbeath (4 miles north), Dysart (11 miles north-east), Lochgelly (6 miles north-east) and Burntisland (6 miles east).
What’s near Fordell Firs
In Fordell Firs, that means homes and buildings near Hillend Tavern, among other places. Fordell Firs’s nearest station is Dalgety Bay station, about 0.9 miles south-east of the centre. Nearby you’ll also find Kingsgate Centre (3.3 miles north-west) and Fordell Castle (within half a mile east). Not far away are Loch Fitty.
Surface by surface
Over-sealed & botched joints
Thick, smeared sealant looks messy and hides problems. We strip it back so we can see the joint, and then we reseal it neatly.
Leaking trays & enclosures
If the tray is cracked, or the leak is from the valve or waste, sealant won’t fix it. We say so rather than reseal.